Title: Phase Equilibria, Diffusivities, and Equation of State Modeling of HFC-32 and HFC-125 in Imidazolium-Based Ionic Liquids for the Separation of R‑410A
Growing concerns about the global warming potential of hydrofluorocarbons (HFCs) has led to increasing interest in developing technologies to effectively recover and recycle these refrigerants. Ionic liquids (ILs) have shown great potential to selectively separate azeotropic HFC gas mixtures, such as R-410A composed of HFC-32 (CH2F2) and HFC-125 (CHF2CF3), based on solubility differences between the refrigerant gases in the respective IL. Isothermal vapor−liquid equilibrium (VLE) data for HFC-32 and HFC-125 were measured in ILs containing fluorinated and nonfluorinated anions using a gravimetric microbalance at pressures ranging from 0.05 to 1.0 MPa and a temperature of 298.15 K. The van der Waals equation of state (EoS) model was applied to correlate the experimental solubility data of each HFC refrigerant/IL mixture. The solubility differences between HFC-32 and HFC-125 vary significantly depending on the choice of IL. The diffusion coefficients for both HFC refrigerants in each IL were calculated by fitting Fick’s law to time-dependent absorption data. HFC-32 has a higher diffusivity in most ILs tested because of its smaller molecular radius relative to HFC-125. Based on the calculated Henry’s law constants and the mass uptake for each system, [C6C1im][Cl] was found to have the highest selectivity difference for separating R-410A at 298.15 K.  more » « less
Award ID(s):
2029354 1917474
PAR ID:
10286819
Author(s) / Creator(s):
Date Published:
Journal Name:
Industrial engineering chemistry research
Volume:
59
Issue:
40
ISSN:
1520-5045
Page Range / eLocation ID:
18222-18235
Subject(s) / Keyword(s):
Sponsoring Org:
National Science Foundation
More Like this
  1. null (Ed.)
    Growing concerns about the global warming potential (GWP) of hydrofluorocarbons (HFCs) has led to increasing interest in developing technologies to effectively recover and recycle these refrigerants. Ionic liquids (ILs) have shown great potential to selectively separate azeotropic HFC gas mixtures such as R-410A composed of HFC-32 (CH2F2) and HFC-125 (CHF2CF3), based on solubility differences between the refrigerant gases in the respective IL. Isothermal vapor−liquid equilibrium (VLE) data for HFC-32 and HFC-125 were measured in ILs containing fluorinated and non-fluorinated anions using a gravimetric microbalance at pressures ranging from 0.05 to 1.0 MPa and a temperature of 298.15 K. The van der Waals Equation of State (EoS) model was applied to correlate the experimental solubility data of each HFC refrigerant / IL mixture. The solubility differences between HFC-32 and HFC-125 vary significantly depending on the choice of IL. The diffusion coefficients for both HFC refrigerants in each IL were calculated by fitting Fick’s law to time-dependent absorption data. HFC-32 has a higher diffusivity in most ILs tested due to its smaller molecular radius relative to HFC-125. Based on the calculated Henry’s law constants and the mass uptake for each system, the [C6C1im][Cl] was found to have the highest selectivity difference for separating R-410A at 298.15 K. 
    more » « less
  2. Yamashita, Y.; Kano, M. (Ed.)
    To help slow climate change, international efforts have begun to mandate the phase-out of high global warming potential (GWP) hydrofluorocarbons (HFCs) throughout the next decade. Most HFC refrigerant mixtures form azeotropes, complicating separation into the individual HFC components for reuse and recycling. In this paper, we design and analyze ionic liquid (IL)-enabled extractive distillation processes for ternary HFC separations using AspenPlus. Specifically, we design processes to separate three commercially important HFC refrigerant mixtures (R-404A, R-407C, and R-410A) into high purity HFC streams. We find added value of the separation of R-410A of 0.58 $/kg with current market conditions, specifically laboratory-scale IL manufacturing costs (1000 $/kg of IL) and a low-price differential of 1.00 $/kg between raw materials and separated products. If the IL purchase cost decreases 90 % due to mass production, consistent with prior adoption of ILs for niche separations, the added value increases to 0.76 $/kg. Moreover, under proposed reductions in HFC manufacturing, the price of recovered products may dramatically increase in the future. For example, if the price of R-32 increases by 50 %, the added value would reach 3.08 $/kg. In summary, we find IL-based recycling of HFCs is economically viable based on simple technoeconomic analysis. Moreover, this paper reports capital and operation cost curves and a general analysis framework to analyze evolving market conditions. 
    more » « less
  3. We describe the first comparative data on metal-mediated C-H activation and functionalization reactions at two-carbon-atom legacy refrigerants and DFT analyses on the resulting organometallic products. We reveal that, depending on the degree of fluorination in the refrigerant, C-H activation could lead either to stable M(H)Rf products or to a M(fluoroolefin) complex. The first example of a metal-mediated dehydrofluorination of R-143a is described, resulting from a β-fluoride elimination reaction of a putative [Ir(H)(CH2CF3)] intermediate and the loss of hydrogen fluoride. This work also reports the first examples of metal-mediated activation of R-125 (CF3CF2H) and R-134a (CF3CFH2) where the direct C-H activation products can be observed spectroscopically and, in the case of R-125, structurally characterized. The stability of the [Ir(H)(Rf)] complexes is notable, given that the direct products of C-H activation of non-chelating alkanes at transition metals remains relatively rare. The clean formation of isolable [Ir(H)(Rf)] complexes is expected to facilitate studies of migratory insertion reactions in these species, which bodes well for efforts to repurpose high-global-warming-potential legacy refrigerants. Finally, DFT calculations provide insight into how the degree of fluorination affects C=C bond lengths and energies of propellor-like rotations in the coordinated fluoroolefins, the relative free energies of fluoroolefin binding, and the role of observed CH···F contacts in the calculated structures. 
    more » « less
  4. Hydrofluorocarbons (HFC), which are mildly flammable and pose potential fire risks, have received greater attention as a viable low global warming potential alternative to traditional refrigerant and fire-suppressant compounds. Therefore, there is a demand to accurately quantify their flammability and reactivity to establish proper safety metrics. This study investigates the effects of radiation heat loss on slowlypropagating HFC/air laminar flames. Planar 1-D simulations of R-32/air and R-1234yf/air flames show significant reductions in laminar flame speed due to radiative heat losses from the flame zone. Simulations of spherically expanding flames (SEF) revealed that the radiation-induced flow needs to be considered when interpreting data from experiments. To this end, a Spherical-flame RADiation-Induced Flow (SRADIF) model was developed to estimate the burned gas inward flow velocities in constant-pressure SEFs, utilizing the optically thin limit assumption to model radiation heat loss. The model was validated against results from detailed numerical simulations of SEFs, from which radiation-induced inward flow was derived using a new formulation considering both the radiation heat loss and convective flow effects. Results show that SRADIF accurately predicts the inward flow velocity for R-32/air mixtures over a range of conditions and performs significantly better compared to existing analytical models. However, the model was unable to accurately predict flow velocities for R-1234yf/air flames and the reason for this is discussed. 
    more » « less
  5. Hydrofluorocarbons (HFC), which are mildly flammable and pose potential fire risks, have received greater attention as a viable low global warming potential (GWP) alternative to traditional refrigerant and fire-suppressant compounds. Therefore, there is a demand to accurately quantify their flammability and reactivity to establish proper safety metrics. This study investigates the effects of radiation in slow-propagating HFC/air laminar flames. Planar 1-D simulations of R-32/air and R-1234yf/air flames show significant reductions in laminar flame speed due to radiative heat losses from the flame zone. Simulations of spherically expanding flames revealed that the radiation-induced flow needs to be considered when interpreting data from experiments. To this end, a radiation model was developed to circumvent the effects of radiation-induced inward flow in constant-pressure (CON-P) SEF experimental measurements, accounting for radiation heat loss using the optically thin limit model. Validation of the radiation model is currently underway, but preliminary results show that the model better predicts the inward flow velocity for most conditions compared to existing analytical models. 
    more » « less