An official website of the United States government
For several decades, plasma processing has been employed in the areas of food processing, manufacturing, and agriculture. Plasma processing has also been recognized as greatly beneficial in the field of tissue engineering for the modification of biomaterials. Polyethylene terephthalate (PET) has been employed as a vascular graft material but fails in small diameter applications. In this work, a multifaceted approach combining electrospinning to produce nano- and microscale fibers from PET blended with polybutylene terephthalate (PBT) added for flexibility and plasma modification for enhancing the surface chemistry is demonstrated to be an efficient approach to increase the biocompatibility as evidenced by enhanced fibroblast growth. The analysis of the surface chemistry shows an increase in oxygenated surface functionality, while the bulk analysis shows no significant changes. Thus, an efficient methodology for producing PET/PBT-based grafts that are easily modified with low-temperature plasma and show enhanced biocompatibility for vascular tissue engineering applications is reported.
more »
« less
Coating small-diameter ePTFE vascular grafts with tunable poly(diol- co -citrate- co -ascorbate) elastomers to reduce neointimal hyperplasia
Lack of long-term patency has hindered the clinical use of small-diameter prosthetic vascular grafts with the majority of these failures due to the development of neointimal hyperplasia. Previous studies by our laboratory revealed that small-diameter expanded polytetrafluoroethylene (ePTFE) grafts coated with antioxidant elastomers are a promising localized therapy to inhibit neointimal hyperplasia. This work is focused on the development of poly(diol- co -citrate- co -ascorbate) (POCA) elastomers with tunable properties for coating ePTFE vascular grafts. A bioactive POCA elastomer (@20 : 20 : 8, [citrate] : [diol] : [ascorbate]) coating was applied on a 1.5 mm diameter ePTFE vascular graft as the most promising therapeutic candidate for reducing neointimal hyperplasia. Surface ascorbate density on the POCA elastomer was increased to 67.5 ± 7.3 ng mg −1 cm −2 . The mechanical, antioxidant, biodegradable, and biocompatible properties of POCA demonstrated desirable performance for in vivo use, inhibiting human aortic smooth muscle cell proliferation, while supporting human aortic endothelial cells. POCA elastomer coating number was adjusted by a modified spin-coating method to prepare small-diameter ePTFE vascular grafts similar to natural vessels. A significant reduction in neointimal hyperplasia was observed after implanting POCA-coated ePTFE vascular grafts in a guinea pig aortic interposition bypass graft model. POCA elastomer thus offers a new avenue that shows promise for use in vascular engineering to improve long-term patency rates by coating small-diameter ePTFE vascular grafts.
more »
« less
- Award ID(s):
- 1921835
- PAR ID:
- 10287942
- Date Published:
- Journal Name:
- Biomaterials Science
- Volume:
- 9
- Issue:
- 15
- ISSN:
- 2047-4830
- Page Range / eLocation ID:
- 5160 to 5174
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Interspecies grafting is an economically relevant technique that allows beneficial shoot and root combinations from separate species to be combined. One hypothesis for the basis of graft compatibility revolves around taxonomic relatedness. To test how phylogenetic distance affects interspecific graft compatibility within the economically important Solanaceae subfamily, Solanoideae, we characterized the anatomical and biophysical integrity of graft junctions between four species: tomato (Solanum lycopersicum), eggplant (Solanum melongena), pepper (Capsicum annuum), and groundcherry (Physalis pubescens). We analyzed the survival, growth, integrity, and cellular composition of the graft junctions. Utilizing various techniques, we were able to quantitatively assess compatibility among the interspecific grafts. Even though most of our graft combinations could survive, we show that only intrageneric combinations between tomato and eggplant are compatible. Unlike incompatible grafts, the formation of substantial vascular reconnections between tomato and eggplant in the intrageneric heterografts likely contributed to biophysically stable grafts. Furthermore, we identified 10 graft combinations that show delayed incompatibility, providing a useful system to pursue deeper work into graft compatibility. This work provides new evidence that graft compatibility may be limited to intrageneric combinations within the Solanoideae subfamily. Further research amongst additional Solanaceous species can be used to test the extent to which our hypothesis applies to this family.more » « less
-
Thermoplastic elastomers based on ABA triblock copolymers are typically limited in modulus and strength due to crack propagation within the brittle regions when the hard end-block composition favors morphologies that exhibit connected domains. Increasing the threshold end-block composition to achieve enhanced mechanical performance is possible by increasing the number of junctions or bridging points per chain, but these copolymer characteristics also tend to increase the complexity of the synthesis. Here, we report an in situ polymerization method to successfully increase the number of effective junctions per chain through grafting of poly(styrene) (PS) to a commercial thermoplastic elastomer, poly(styrene)–poly(butadiene)–poly(styrene) (SBS). The strategy described here transforms a linear SBS triblock copolymer–styrene mixture into a linear-comb-linear architecture in which poly(styrene) (PS) grafts from the mid-poly(butadiene) (PBD) block during the polymerization of styrene. Through systematic variation in the initial SBS/styrene content, nanostructural transitions from disordered spheres to lamellar through reaction-induced phase transitions (RIPT) were identified as the styrene content increased. Surprisingly, maximum mechanical performance (Young's modulus, tensile strength, and elongation at break) was obtained with samples exhibiting lamellar nanostructures, corresponding to overall PS contents of 61–77 wt% PS (including the original PS in SBS). The PS grafting from the PBD block increases the modulus and the strength of the thermoplastic elastomer while preventing brittle fracture due to the greater number of junctions afforded by the PS grafts. The work presented here demonstrates the use of RIPT to transform standard SBS materials into polymer systems with enhanced mechanical properties.more » « less
-
N -Acetylcysteine (NAC) has health benefits attributed to its antioxidant properties and disulfide bond cleavage ability. Unfortunately, solutions of NAC are acidic with an undesirable taste and an unpleasant aftertaste. A method for slowing NAC release in water was developed using a solid phase wax coating. A coating of natural waxes, using food grade corn oil as the solvent and surfactants to facilitate the wax coating on the particles was used to decrease the solubility of NAC powder, crystals, and granules in water. A high NAC loading, between 55 and 91% for NAC granules and NAC crystals, was achieved as measured using LC-MS. The NAC wax-coated particles were fully characterized, and microscopy and SEM images revealed the shape, morphology, and size of the particles. Conductometry was used to study NAC release profile in water from wax-coated particles and the results indicate that solid phase wax coatings slowed the release of NAC into water.more » « less
-
As a treatment for the widely spread cardiovascular diseases (CVD), bypass vascular grafts have room for improvement in terms of mechanical property match with native arteries. A 3D‐printed nozzle is presented, featuring unique internal structures, to extrude artificial vascular grafts with a flower‐mimicking geometry. The multilayer‐structured graft wall allows the inner and outer layers to interfere sequentially during lateral expansion, replicating the nonlinear elasticity of native vessels. Both experiment and simulation results verify the necessity and benefit of the flower‐mimicking structure in obtaining the self‐toughening behavior. The gelation study of natural polymers and the utilization of sacrificial phase enables the smooth extrusion of the multiphase conduit, where computer‐assisted image analysis is employed to quantify manufacturing fidelity. The cell viability tests demonstrate the cytocompatibility of the gelatin methacryloyl (GelMA)/sodium alginate grafts, suggesting potential for further clinical research with further developments. This study presents a feasible approach for fabricating bypass vascular grafts and inspires future treatments for CVD.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/D1BM00101A
