skip to main content


Title: Surface‐Bound Microgels for Separation, Sensing, and Biomedical Applications
Abstract

This study presents a comprehensive survey of microgel‐coated materials and their functional behavior, describing the complex interplay between the physicochemical and mechanical properties of the microgels and the chemical and morphological features of substrates. The cited literature is articulated in four main sections: i) properties of 2D and 3D substrates, ii) synthesis, modification, and characterization of the microgels, iii) deposition techniques and surface patterning, and iv) application of microgel‐coated surfaces focusing on separations, sensing, and biomedical applications. Each section discusses – by way of principles and examples – how the various design parameters work in concert to deliver functionality to the composite systems. The case studies presented herein are viewed through a multi‐scale lens. At the molecular level, the surface chemistry and the monomer make‐up of the microgels endow responsiveness to environmental and artificial physical and chemical cues. At the micro‐scale, the response effects shifts in size, mechanical, and optical properties, and affinity towards species in the surrounding liquid medium, ranging from small molecules to cells. These phenomena culminate at the macro‐scale in measurable, reversible, and reproducible effects, aiming in a myriad of directions, from lab‐scale to industrial applications.

 
more » « less
Award ID(s):
1809453
NSF-PAR ID:
10361926
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Functional Materials
Volume:
31
Issue:
47
ISSN:
1616-301X
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    Hydrogels have emerged as prototypical stimuli‐responsive materials with potential applications in soft robotics, microfluidics, tissue engineering, and adaptive optics. To leverage the full potential of these materials, fabrication techniques capable of simultaneous control of microstructure, device architecture, and interfacial stability, that is, adhesion of hydrogel components to support substrates, are needed. A universal strategy for the microfabrication of hydrogel‐based devices with robust substrate adhesion amenable to use in liquid environments would enable numerous applications. This manuscript reports a general approach for the facile production of covalently attached, ordered arrays of microscale hydrogels (microgels) on silicone supports. Specifically, silicone‐based templates are used to: i) drive mechanical assembly of prepolymer droplets into well‐defined geometries and morphologies, and ii) present appropriate conjugation moieties to fix gels in place during photoinitiated crosslinking via a “graft from” polymerization scheme. Automated processing enabled rapid microgel array production for characterization, testing, and application. Furthermore, the stimuli‐responsive microlensing properties of these arrays, via contractile modulated refractive index, are demonstrated. This process is directly applicable to the fabrication of adaptive optofluidic systems and can be further applied to advanced functional systems such as soft actuators and robotics, and 3D cell culture technologies.

     
    more » « less
  2. Abstract

    Granular hydrogels are an emerging class of biomaterials formed by jamming hydrogel microparticles (i.e., microgels). These materials have many advantageous properties that can be tailored through microgel design and extent of packing. To enhance the range of properties, granular composites can be formed with a hydrogel interstitial matrix between the packed microgels, allowing for material flow and then stabilization after crosslinking. This approach allows for distinct compartments (i.e., microgels and interstitial space) with varied properties to engineer complex material behaviors. However, a thorough investigation of how the compositions and ratios of microgels and interstitial matrices influence material properties has not been performed. Herein, granular hydrogel composites are fabricated by combining fragmented hyaluronic acid (HA) microgels with interstitial matrices consisting of photocrosslinkable HA. Microgels of varying compressive moduli (10–70 kPa) are combined with interstitial matrices (0–30 vol.%) with compressive moduli varying from 2–120 kPa. Granular composite structure (confocal imaging), mechanics (local and bulk), flow behavior (rheology), and printability are thoroughly assessed. Lastly, variations in the interstitial matrix chemistry (covalent vs guest–host) and microgel degradability are investigated. Overall, this study describes the influence of granular composite composition on structure and mechanical properties of granular hydrogels towards informed designs for future applications.

     
    more » « less
  3. Abstract

    Microgels have recently received widespread attention for their applications in a wide array of domains such as tissue engineering, regenerative medicine, and cell and tissue transplantation because of their properties like injectability, modularity, porosity, and the ability to be customized in terms of size, form, and mechanical properties. However, it is still challenging to mass (high-throughput) produce microgels with diverse sizes and tunable properties. Herein, we utilized an air-assisted co-axial device (ACAD) for continuous production of microgels in a high-throughput manner. To test its robustness, microgels of multiple hydrogels and their combination, including alginate (Alg), gelatin methacrylate (GelMA) and Alg–GelMA, were formed at a maximum production rate of ∼65 000 microgels s−1while retaining circularity and a size range of 50–500µm based on varying air pressure levels. The ACAD platform allowed single and multiple cell encapsulation with 74 ± 6% efficiency. These microgels illustrated appealing rheological properties such as yield stress, viscosity, and shear modulus for bioprinting applications. Specifically, Alg microgels have the potential to be used as a sacrificial support bath while GelMA microgels have potential for direct extrusion both on their own or when loaded in a bulk GelMA hydrogel. Generated microgels showed high cell viability (>90%) and proliferation of MDA-MB-231 and human dermal fibroblasts over seven days in both encapsulation and scaffolding applications, particularly for GelMA microgels. The developed strategy provides a facile and rapid approach without any complex or expensive consumables and accessories for scalable high-throughput microgel production for cell therapy, tissue regeneration and 3D bioprinting applications.

     
    more » « less
  4. Abstract

    Injectable hydrogels are increasingly explored for the delivery of cells to tissue. These materials exhibit both liquid‐like properties, protecting cells from mechanical stress during injection, and solid‐like properties, providing a stable 3D engraftment niche. Many strategies for modulating injectable hydrogels tune liquid‐ and solid‐like material properties simultaneously, such that formulation changes designed to improve injectability can reduce stability at the delivery site. The ability to independently tune liquid‐ and solid‐like properties would greatly facilitate formulation development. Here, such a strategy is presented in which cells are ensconced in the pores between microscopic granular hyaluronic acid (HA) hydrogels (microgels), where elasticity is tuned with static covalent intra‐microgel crosslinks and flowability with mechanosensitive adamantane‐cyclodextrin (AC) inter‐microgel crosslinks. Using the same AC‐free microgels as a 3D printing support bath, the location of each cell is preserved as it exits the needle, allowing identification of the mechanism driving mechanical trauma‐induced cell death. The microgel AC concentration is varied to find the threshold from microgel yielding‐ to AC interaction‐dominated injectability, and this threshold is exploited to fabricate a microgel with better injection‐protecting performance. This delivery strategy, and the balance between intra‐ and inter‐microgel properties it reveals, may facilitate the development of new cell injection formulations.

     
    more » « less
  5. Suspensions of soft and highly deformable microgels can be concentrated far more than suspensions of hard colloids, leading to their unusual mechanical properties. Microgels can accommodate compression in suspensions in a variety of ways such as interpenetration, deformation, and shrinking. Previous experiments have offered insightful, but somewhat conflicting, accounts of the behavior of individual microgels in compressed suspensions. We develop a mesoscale computational model to probe the behavior of compressed suspensions consisting of microgels with different architectures at a variety of packing fractions and solvent conditions. We find that microgels predominantly change shape and mildly shrink above random close packing. Interpenetration is only appreciable above space filling, remaining small relative to the mean distance between cross-links. At even higher packing fractions, microgels solely shrink. Remarkably, irrespective of the single-microgel properties, and whether the suspension concentration is changed via changing the particle number density or the swelling state of the particles, which can even result in colloidal gelation, the mechanics of the suspension can be quantified in terms of the single-microgel bulk modulus, which thus emerges as the correct mechanical measure for these type of soft-colloidal suspensions. Our results rationalize the many and varied experimental results, providing insights into the relative importance of effects defining the mechanics of suspensions comprising soft particles.

     
    more » « less