Sodium‐metal batteries (SMBs) are considered as a compliment to lithium‐metal batteries for next‐generation high‐energy batteries because of their low cost and the abundance of sodium (Na). Herein, a 3D nanostructured porous carbon particle containing carbon‐shell‐coated Fe nanoparticles (PC‐CFe) is employed as a highly reversible Na‐metal host. PC‐CFe has a unique 3D hierarchy based on sub‐micrometer‐sized carbon particles, ordered open channels, and evenly distributed carbon‐coated Fe nanoparticles (CFe) on the surface. PC‐CFe achieves high reversibility of Na plating/stripping processes over 500 cycles with a Coulombic efficiency of 99.6% at 10 mA cm–2with 10 mAh cm–2in Na//Cu asymmetric cells, as well as over 14 400 cycles at 60 mA cm–2in Na//Na symmetric cells. Density functional theory calculations reveal that the superior cycling performance of PC‐CFe stems from the stronger adsorption of Na on the surface of the CFe, providing initial nucleation sites more favorable to Na deposition. Moreover, the full cell with a PC‐CFe host without Na metal and a high‐loading Na3V2(PO4)3cathode (10 mg cm–2) maintains a high capacity of 103 mAh g–1at 1 mA cm–2even after 100 cycles, demonstrating the operation of anode‐free SMBs.
Benefiting from abundant resource reserves and considerable theoretical capacity, sodium (Na) metal is a strong anode candidate for low‐cost, large‐scale energy storage applications. However, extensive volume change and mossy/dendritic growth during Na electrodeposition have impeded the practical application of Na metal batteries. Herein, a self‐sodiophilic carbon host, lignin‐derived carbon nanofiber (LCNF), is reported to accommodate Na metal through an infiltration method. Na metal is completely encapsulated in the 3D space of the LCNF host, where the strong interaction between LCNF and Na metal is mediated by the self‐sodiophilic sites. The resulting LCNF@Na electrode delivers good cycling stability with a low voltage hysteresis and a dendrite‐free morphology in commercial carbonate‐based electrolytes. When interfaced with O3‐NaNi0.33Mn0.33Fe0.33O2and P2‐Na0.7Ni0.33Mn0.55Fe0.1Ti0.02O2cathodes in full cell Na metal batteries, the LCNF@Na electrode enables high capacity retentions, long cycle life, and good rate capability. Even in a “lean” Na anode environment, the full cells can still deliver good electrochemical performance. The overall stable battery performance, based on a self‐sodiophilic, biomass‐derived carbon host, illuminates a promising path towards enabling low‐cost Na metal batteries.
more » « less- Award ID(s):
- 1912885
- NSF-PAR ID:
- 10453753
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Functional Materials
- Volume:
- 31
- Issue:
- 9
- ISSN:
- 1616-301X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Earth-abundant, cost-effective electrode materials are essential for sustainable rechargeable batteries and global decarbonization. Manganese dioxide (MnO2) and hard carbon both exhibit high structural and chemical tunability, making them excellent electrode candidates for batteries. Herein, we elucidate the impact of electrolytes on the cycling performance of commercial electrolytic manganese dioxide in Li chemistry. We leverage synchrotron X-ray analysis to discern the chemical state and local structural characteristics of Mn during cycling, as well as to quantify the Mn deposition on the counter electrode. By using an ether-based electrolyte instead of conventional carbonate electrolytes, we circumvent the formation of a surface Mn(II)-layer and Mn dissolution from LixMnO2. Consequently, we achieved an impressive ∼100% capacity retention for MnO2after 300 cycles at C/3. To create a lithium metal-lean full cell, we introduce hard carbon as the anode which is compatible with ether-based electrolytes. Commercial hard carbon delivers a specific capacity of ∼230 mAh g−1at 0.1 A g−1without plateau, indicating a surface-adsorption mechanism. The resulting manganese dioxide||hard carbon full cell exhibits stable cycling and high Coulombic efficiency. Our research provides a promising solution to develop cost-effective, scalable, and safe energy storage solutions using widely available manganese oxide and hard carbon materials.
-
more » « less
Abstract Given the high energy density, alkali metals are preferred in rechargeable batteries as anodes, however, with significant limitations such as dendrite growth and volume expansion, leading to poor cycle life and safety concerns. Herein a room‐temperature liquid alloy system is proposed as a possible solution for its self‐recovery property. Full extraction of alkali metal ions from the ternary alloy brings it back to the binary liquid eutectic, and thus enables a self‐healing process of the cracked or pulverized structure during cycling. A half‐cell discharge specific capacity of up to 706.0 mAh g−1in lithium‐ion battery and 222.3 mAh g−1for sodium‐ion battery can be delivered at 0.1C; at a high rate of 5C, a sizable capacity of over 400 mAh g−1for Li and 60 mAh g−1for Na could be retained. Li and Na ion full cells with considerable stability are demonstrated when pairing liquid metal with typical cathode materials, LiFePO4, and P2‐Na2/3[Ni1/3Mn2/3]O2. Remarkable cyclic durability, considerable theoretical capacity utilization, and reasonable rate stability present in this work allow this novel anode system to be a potential candidate for rechargeable alkali‐ion batteries.
-
more » « less
Abstract Iron ion batteries using Fe2+as a charge carrier have yet to be widely explored, and they lack high‐performing Fe2+hosting cathode materials to couple with the iron metal anode. Here, it is demonstrated that VOPO4∙2H2O can reversibly host Fe2+with a high specific capacity of 100 mAh g−1and stable cycling performance, where 68% of the initial capacity is retained over 800 cycles. In sharp contrast, VOPO4∙2H2O's capacity of hosting Zn2+fades precipitously over tens of cycles. VOPO4∙2H2O stores Fe2+with a unique mechanism, where upon contacting the electrolyte by the VOPO4∙2H2O electrode, Fe2+ions from the electrolyte get oxidized to Fe3+ions that are inserted and trapped in the VOPO4∙2H2O structure in an electroless redox reaction. The trapped Fe3+ions, thus, bolt the layered structure of VOPO4∙2H2O, which prevents it from dissolution into the electrolyte during (de)insertion of Fe2+. The findings offer a new strategy to use a redox‐active ion charge carrier to stabilize the layered electrode materials.
-
more » « less
Abstract NASICON‐type sodium vanadium phosphate (Na3V2(PO4)3, or NVP) cathode materials have great potential for fast charging and long cycling sodium‐ion batteries (SIBs) similar to lithium iron phosphate (LiFePO4, or LFP) cathode materials used in lithium‐ion batteries (LIBs). However, the cycle life and energy density in the full cell using NVP materials need to be significantly improved. This paper investigates the degradation mechanisms of NVP‐based SIBs and identifies the Na loss from the cathode to the anode solid electrolyte interphase (SEI) reactions as the main cause of capacity degradation. A new Na‐rich NVP cathode (e.g., Na4V2(PO4)3, or Na4VP) is developed to address the Na loss problem. Conventional NVP can be easily transformed into the Na4VP by a facile and fast chemical solution treatment (30 s). Na‐free‐anode Na4VP and hard carbon‐Na4VP full cells are assembled to evaluate the electrochemical properties of the Na‐rich NVP cathode. The Na4VP cathode provides excess Na to compensate for the Na loss, resulting much longer cycle life in the full cells (>400 cycles) and a high specific energy and power density. Good low‐temperature performance is also observed.
