Attention:The NSF Public Access Repository (PAR) system and access will be unavailable from 5:00 PM ET until 8:00 PM ET on Friday, September 11 due to maintenance. We apologize for the inconvenience.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Inverse design and flexible parameterization of meta-optics using algorithmic differentiation
Abstract Ultrathin meta-optics offer unmatched, multifunctional control of light. Next-generation optical technologies, however, demand unprecedented performance. This will likely require design algorithms surpassing the capability of human intuition. For the adjoint method, this requires explicitly deriving gradients, which is sometimes challenging for certain photonics problems. Existing techniques also comprise a patchwork of application-specific algorithms, each focused in scope and scatterer type. Here, we leverage algorithmic differentiation as used in artificial neural networks, treating photonic design parameters as trainable weights, optical sources as inputs, and encapsulating device performance in the loss function. By solving a complex, degenerate eigenproblem and formulating rigorous coupled-wave analysis as a computational graph, we support both arbitrary, parameterized scatterers and topology optimization. With iteration times below the cost of two forward simulations typical of adjoint methods, we generate multilayer, multifunctional, and aperiodic meta-optics. As an open-source platform adaptable to other algorithms and problems, we enable fast and flexible meta-optical design.  more » « less
Award ID(s):
1825308
PAR ID:
10294865
Author(s) / Creator(s):
;
Date Published:
Journal Name:
Communications Physics
Volume:
4
Issue:
1
ISSN:
2399-3650
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; (, Applied Physics Letters)
    Rapid advancements in autonomous systems and the Internet of Things have necessitated the development of compact and low-power image sensors to bridge the gap between the digital and physical world. To that end, sub-wavelength diffractive optics, commonly known as meta-optics, have garnered significant interest from the optics and photonics community due to their ability to achieve multiple functionalities within a small form factor. Despite years of research, however, the performance of meta-optics has often remained inferior compared to that of traditional refractive optics. In parallel, computational imaging techniques have emerged as a promising path to miniaturize optical systems, albeit often at the expense of higher power and latency. The lack of desired performance from either meta-optical or computational solutions has motivated researchers to look into a jointly optimized meta-optical–digital solution. While the meta-optical front end can preprocess the scene to reduce the computational load on the digital back end, the computational back end can in turn relax requirements on the meta-optics. In this Perspective, we provide an overview of this up-and-coming field, termed here as “software-defined meta-optics.” We highlight recent contributions that have advanced the current state of the art and point out directions toward which future research efforts should be directed to leverage the full potential of subwavelength photonic platforms in imaging and sensing applications. Synergistic technology transfer and commercialization of meta-optic technologies will pave the way for highly efficient, compact, and low-power imaging systems of the future. 
    more » « less
  2. ; ; ; ; ; ; (, Nanophotonics)
    The metasurfaces have shown great potential for miniaturizing conventional optics while offering extended flexibility. Recently, there has been considerable interest in using algorithms to generate meta-atom shapes for these metasurfaces, as they offer vast design freedom and not biased by the human intuition. However, these complex designs significantly increase the difficulty of fabrication. To address this, we introduce a design process that rigorously enforces the fabricability of both the material-filled (fill) and empty (void) regions in a metasurface design. This process takes into account specific constraints regarding the minimum feature size for each region. Additionally, it corrects any violations of these constraints across the entire device, ensuring only minimal impact on performance. Our method provides a practical way to create metasurface designs that are easy to fabricate, even with complex shapes, hence improving the overall production yield of these advanced meta-optical components. 
    more » « less
  3. ; ; ; ; ; ; ; ; ; ; et al (, Nature Communications)
    Abstract Subwavelength diffractive optics known as meta-optics have demonstrated the potential to significantly miniaturize imaging systems. However, despite impressive demonstrations, most meta-optical imaging systems suffer from strong chromatic aberrations, limiting their utilities. Here, we employ inverse-design to create broadband meta-optics operating in the long-wave infrared (LWIR) regime (8-12μm). Via a deep-learning assisted multi-scale differentiable framework that links meta-atoms to the phase, we maximize the wavelength-averaged volume under the modulation transfer function (MTF) surface of the meta-optics. Our design framework merges local phase-engineering via meta-atoms and global engineering of the scatterer within a single pipeline. We corroborate our design by fabricating and experimentally characterizing all-silicon LWIR meta-optics. Our engineered meta-optic is complemented by a simple computational backend that dramatically improves the quality of the captured image. We experimentally demonstrate a six-fold improvement of the wavelength-averaged Strehl ratio over the traditional hyperboloid metalens for broadband imaging. 
    more » « less
  4. ; ; ; ; (, Journal of Physics: Photonics)
    The field of meta-optics has grown to include metalenses spanning the ultraviolet to terahertz regimes. Imaging is a key application of meta-optics, with recent works demonstrating meta-optical imaging with advanced functionalities including wide field of view, broadband operation, and polarization sensitivity. In this review, we focus on meta-optical imaging for thermal wavelengths. Thermal meta-optics are less well-studied than those in the visible range but have vast potential applications spanning defense, health, and geological sensing. We first introduce these applications and their specific challenges. With compact form-factor and multi-functional capabilities, we suggest that meta-optics are particularly well-suited to meet the needs of imaging in the mid- and long-wave infrared. Then, we review published experimental demonstrations of thermal imaging via meta-optics. These meta-optics vary in complexity from simple hyperboloid metalenses to complex systems composed of engineered meta-atoms and multiple layers of optics. Finally, we suggest some areas where thermal meta-optics may be useful, and we identify some emerging approaches to solve lingering challenges of meta-optical imaging. 
    more » « less
  5. ; ; ; ; ; (, Optica)
    Sub-wavelength diffractive meta-optics have emerged as a versatile platform to manipulate light fields at will, due to their ultra-small form factor and flexible multifunctionalities. However, miniaturization and multimodality are typically compromised by a reduction in imaging performance; thus, meta-optics often yield lower resolution and stronger aberration compared to traditional refractive optics. Concurrently, computational approaches have become popular to improve the image quality of traditional cameras and exceed limitations posed by refractive lenses. This in turn often comes at the expense of higher power and latency, and such systems are typically limited by the availability of certain refractive optics. Limitations in both fields have thus sparked cross-disciplinary efforts to not only overcome these roadblocks but also to go beyond and provide synergistic meta-optical–digital solutions that surpass the potential of the individual components. For instance, an application-specific meta-optical frontend can preprocess the light field of a scene and focus it onto the sensor with a desired encoding, which can either ease the computational load on the digital backend or can intentionally alleviate certain meta-optical aberrations. In this review, we introduce the fundamentals, summarize the development of meta-optical computational imaging, focus on latest advancements that redefine the current state of the art, and give a perspective on research directions that leverage the full potential of sub-wavelength photonic platforms in imaging and sensing applications. The current advancement of meta-optics and recent investments by foundries and technology partners have the potential to provide synergistic future solutions for highly efficient, compact, and low-power imaging systems. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email