skip to main content


Title: Laser induced graphene for in situ damage sensing in aramid fiber reinforced composites
In situ monitoring of strain and damage in fiber-reinforced composites provides critical information regarding the state of the material without requiring the structure to be removed from operation. In order to avoid the use of complex, heavy, and bulky sensor networks to track the state of the structure, recent focus has turned to multifunctional materials with inherent characteristics which enable in situ monitoring. This work investigates laser induced graphene (LIG) integrated within aramid fiber reinforced composites for damage and strain sensing during mechanical loading. The LIG used here fully integrates the sensing material within the composite as the piezoresistive graphene layer is coated directly onto the reinforcing aramid fabric prior to infusing the fibers with the supporting matrix. The sensing element is thus not susceptible to environmental effects and adds no extra weight while also maintaining the specific strength of the material. As strain and damage occur within the composite, the LIG proves capable of tracking strain and detecting plastic deformation in situ. Thus, the result of this work is the integration of a multifunctional component into aramid composites which possesses in situ sensing capabilities. Furthermore, the processes and materials are easily scalable for the large-scale production of multifunctional aramid fiber reinforced composites.  more » « less
Award ID(s):
1762369
NSF-PAR ID:
10297097
Author(s) / Creator(s):
; ; ;
Date Published:
Journal Name:
Composites science and technology
Volume:
201
ISSN:
0266-3538
Page Range / eLocation ID:
108541
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Structural health monitoring of fiber-reinforced composite materials is of critical importance due to their use in challenging structural applications where low density is required and the designs typically use a low factor of safety. In order to reduce the need for external sensors to monitor composite structures, recent attention has turned to multifunctional materials with integrated sensing capabilities. This work use laser induced graphene (LIG) to create multifunctional structure with embedded piezoresistivity for the simultaneous and in-situ monitoring of both strain and damage in fiberglass-reinforced composites. The LIG layers are integrated dur-ing the fabrication process through transfer printing to the surface of the prepreg before being laid up into the ply stack, and are thus located in the interlaminar region of the fiberglass-reinforced composite. The methods used in this work are simple and require no treatment or modification to the commercial fiberglass prepreg prior to LIG transfer printing which is promising for industrial scale use. The performance of the piezoresistive interlayer in monitoring both strain and damage in-situ are demonstrated via three-point bend and tensile testing. Addi-tionally, the interlaminar properties of the fiberglass composites were observed to be largely maintained with the LIG present in the interlaminar region of the composite, while the damping properties were found to be improved. This work therefore introduces a novel multifunctional material with high damping and fully inte-grated sensing capabilities through a cost-effective and scalable process. 
    more » « less
  2. null (Ed.)
    Structural health monitoring of fiber-reinforced composite materials is of critical importance due to their use in challenging structural applications where low density is required and the designs typically use a low factor of safety. In order to reduce the need for external sensors to monitor composite structures, recent attention has turned to multifunctional materials with integrated sensing capabilities. This work use laser induced graphene (LIG) to create multifunctional structure with embedded piezoresistivity for the simultaneous and in-situ monitoring of both strain and damage in fiberglass-reinforced composites. The LIG layers are integrated during the fabrication process through transfer printing to the surface of the prepreg before being laid up into the ply stack, and are thus located in the interlaminar region of the fiberglass-reinforced composite. The methods used in this work are simple and require no treatment or modification to the commercial fiberglass prepreg prior to LIG transfer printing which is promising for industrial scale use. The performance of the piezoresistive interlayer in monitoring both strain and damage in-situ are demonstrated via three-point bend and tensile testing. Additionally, the interlaminar properties of the fiberglass composites were observed to be largely maintained with the LIG present in the interlaminar region of the composite, while the damping properties were found to be improved. This work therefore introduces a novel multifunctional material with high damping and fully integrated sensing capabilities through a cost-effective and scalable process. 
    more » « less
  3. null (Ed.)
    Aramid fiber reinforced polymer composites have been shown to exhibit impressive mechanical properties, including high strength-to-weight ratio, excellent abrasion resistance, and exceptional ballistic performance. For these reasons, aramid composites have been heavily used in high impact loading environments where ballistic properties are vital. In-situ damage monitoring of aramid composites under dynamic loading conditions typically requires externally bonded sensors, which add bulk and are limited by size and space constraints. To overcome these limitations, this work presents a piezoresistive laser induced graphene (LIG) interface for embedded impact sensing in aramid fiber reinforced composites. Through the monitoring of electrical impedance during ballistic impact, information regarding time and severity of the impact is obtained. The impact velocity correlates with the impedance change of the composites, due to delamination between aramid plies and damage to the LIG interface. The delamination length in Mode I specimens also correlates to changes in electrical impedance of the composite. The interlaminar fracture toughness and areal-density-specific V50 of the LIG aramid composites increased relative to untreated aramid composites. This work demonstrates a methodology to form multifunctional aramid-based composites with a LIG interface that provides both improved toughness and imbedded sensing of impact and damage severity during ballistic impact. 
    more » « less
  4. null (Ed.)
    Fiberglass-reinforced composite materials are commonly used in engineering structures subjected to dynamic loading, such as wind turbine blades, automobiles, and aircraft, where they experience a wide range of unpredictable operating conditions. The ability to monitor these structures while in operation and predict their remaining structural life without requiring their removal from service has the potential to drastically reduce maintenance costs and improve reliability. This work exploits piezoresistive laser induced graphene (LIG) integrated into fiberglass-reinforced composites for in-situ fatigue damage monitoring and lifespan prediction. The LIG is integrated within fiberglass composites using a transfer-printing process that is scalable with the potential for automation, thus reducing barriers for widespread application. The addition of the conductive LIG within the traditionally insulating fiberglass composites enables direct in-situ damage monitoring through simple passive resistance measurements during tension-tension fatigue loading. The accumulation and propagation of structural damage are detected throughout the fatigue life of the composite through changes to the electrical resistance measurements, and the measurement trends are further used to predict the onset of catastrophic composite failure. Thus, this work results in a scalable and multifunctional composite material with self-sensing capabilities for potential use in high-performing, dynamic, and flexible composite structures. 
    more » « less
  5. null (Ed.)
    Current in situ piezoresistive damage detection techniques for fiberglass-reinforced composites are limited in widespread application as they require complex processing techniques which inhibit the scalability of the methods. To eradicate such challenges and expand the use of piezoresistive monitoring of fiberglass composites, this work utilizes a simple, scalable process to coat electrically insulating commercial fiberglass prepreg with piezoresistive laser induced graphene (LIG) for the detection and localization of damage. Recently, LIG has attracted substantial research attention due to the simplicity of the methodology and the piezoresistance of the LIG. Here, the LIG is transfer printed onto commercial fiberglass prepreg which is subsequently used to localize damage in all three dimensions of the resultant fiberglass-reinforced composites while also maintaining the structural properties of the composites. A combination of in situ and ex-situ resistance measurements are used to accomplish this objective: First, in situ measurements are used to determine the relative location of damage in one-dimension under tensile loading. Subsequently, separate in situ measurements are used to locate damage through the thickness under flexural loading. Finally, ex-situ methods are used to calculate the two-dimensional location of a hole in a plate. The LIG is found to reliably and accurately localize the damage to the composite in each case thus demonstrating for the first time that transfer printed LIG enables self-sensing of damage location in fiberglass composites. The result of this work is thus a multifunctional material capable of locating damage in all three-dimensions which is notably fabricated using commercial materials and scalable methodology. 
    more » « less