skip to main content


Title: Nanopipette‐based electrochemical SERS platforms: Using electrodeposition to produce versatile and adaptable plasmonic substrates
Abstract

A method for fabricating localized EC‐SERS probes based on nanopipettes and electrodeposition is described. Gold particles of fractal geometry with excellent SERS performance are produced, reliably and at low cost. By adapting the electrodeposition procedure, nanostructures of different sizes can be obtained, allowing the SERS platform to be tailored to many experimental configurations. In particular, by producing unique SERS platforms of dimensions comparable to the laser spot, quantitative comparison with electrochemical current is possible. By analyzing hundreds of samples, we thoroughly characterize the resulting geometry of the structures and their ability to enhance Raman signal, providing guidelines for the fabrication of optimized platforms. Control over the probes' surface potential also allows convenient modulation of surface‐analyte affinity and enable chemically unstable materials, such as Cu, to be reliably used. These are demonstrated by showing that Cu particles exposed to air can be easily re‐reduced, with no detriment in SERS performance.

 
more » « less
Award ID(s):
1807278
NSF-PAR ID:
10452343
Author(s) / Creator(s):
 ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Journal of Raman Spectroscopy
Volume:
52
Issue:
2
ISSN:
0377-0486
Page Range / eLocation ID:
p. 339-347
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    Dynamic windows allow user control over light and heat flow to save energy and maximize comfort. Reversible metal electrodeposition (RME) dynamic windows can uniquely tint to a color‐neutral privacy state (0.1% visible light transmission). The design parameters of transparent metal mesh counter electrodes for high‐contrast RME dynamic windows: high transparency, charge capacity and surface area with low haze, sheet resistance and cost are discussed, concluding that woven metal meshes meet these design parameters. Electroplated current is measured on an indium tin oxide electrode and two meshes with different wire spacings, showing the meshes’ cylindrical geometry enable them to draw more current per square area. The mesh material composition is analyzed to ensure cycling durability in a CuBi electrolyte by developing a transparent mesh with an inert core (stainless steel, SS), a thin Au coating, and a high charge‐capacity (1.5 C cm−2) CuBi outer coating. The study demonstrates that the films maintain a consistent Cu:Bi ratio and optical properties after 250 privacy cycles or 1500 cycles to 10% transmission, showing that the Cu and Bi coating is effective in keeping the films from becoming Cu rich with cycling. Finally, a 100 cm2device with excellent uniformity and color neutrality is demonstrated.

     
    more » « less
  2. Abstract

    The interrelation is explored between external pressure (0.1, 1, and 10 MPa), solid electrolyte interphase (SEI) structure/morphology, and lithium metal plating/stripping behavior. To simulate anode‐free lithium metal batteries (AF‐LMBs) analysis is performed on “empty” Cu current collectors in standard carbonate electrolyte. Lower pressure promotes organic‐rich SEI and macroscopically heterogeneous, filament‐like Li electrodeposits interspersed with pores. Higher pressure promotes inorganic F‐rich SEI with more uniform and denser Li film. A “seeding layer” of lithiated pristine graphene (pG@Cu) favors an anion‐derived F‐rich SEI and promotes uniform metal electrodeposition, enabling extended electrochemical stability at a lower pressure. State‐of‐the‐art electrochemical performance is achieved at 1MPa: pG‐enabled half‐cell is stable after 300 h (50 cycles) at 1 mA cm−2rate −3 mAh cm−2capacity (17.5 µm plated/stripped), with cycling Coulombic efficiency (CE) of 99.8%. AF‐LMB cells with high mass loading NMC622 cathode (21 mg cm−2) undergo 200 cycles with a CE of 99.4% at C/5‐charge and C/2‐discharge (1C = 178 mAh g−1). Density functional theory (DFT) highlights the differences in the adsorption energy of solvated‐Li+onto various crystal planes of Cu (100), (110), and (111), versus lithiated/delithiated (0001) graphene, giving insight regarding the role of support surface energetics in promoting SEI heterogeneity.

     
    more » « less
  3. Abstract

    Plasmonic metal nanostructures are essential for plasmon‐mediated chemical reactions (PMCRs) and surface‐enhanced Raman spectroscopy (SERS). The nanostructures are commonly made from the coinage metals gold and silver. Copper (Cu) is less used mainly due to the difficulties in fabricating stable nanostructures. However, Cu is an attractive option with its strong plasmonic properties, high catalytic activities, and relatively cheap price. Herein, we fabricated tunable, reliable, and efficient Cu nanoelectrodes (CuNEs). Using time‐resolved electrochemical SERS, we have comprehensively studied the reversible chemical transformations between aromatic amine and nitro groups modified on the CuNE surface. Their PMCRs are well‐controlled by changing the surface roughness, the oxidation states of Cu, and the applied electrode potential. We thus demonstrate that the Cu nanostructures enable better investigations in the interplays between PMCR, electrochemistry, and Cu catalysis.

     
    more » « less
  4. Abstract

    Plasmonic metal nanostructures are essential for plasmon‐mediated chemical reactions (PMCRs) and surface‐enhanced Raman spectroscopy (SERS). The nanostructures are commonly made from the coinage metals gold and silver. Copper (Cu) is less used mainly due to the difficulties in fabricating stable nanostructures. However, Cu is an attractive option with its strong plasmonic properties, high catalytic activities, and relatively cheap price. Herein, we fabricated tunable, reliable, and efficient Cu nanoelectrodes (CuNEs). Using time‐resolved electrochemical SERS, we have comprehensively studied the reversible chemical transformations between aromatic amine and nitro groups modified on the CuNE surface. Their PMCRs are well‐controlled by changing the surface roughness, the oxidation states of Cu, and the applied electrode potential. We thus demonstrate that the Cu nanostructures enable better investigations in the interplays between PMCR, electrochemistry, and Cu catalysis.

     
    more » « less
  5. Abstract

    Ag nanorods receive intensive attention due to the excellent plasmonic properties. However, the difficulty in synthesis of monodisperse Ag nanorods with broad aspect ratios has limited their in‐depth applications. Here, a seed‐mediated method is reported for the synthesis of Ag nanorods with lengths from 65 to 5000 nm, corresponding to aspect ratios from 2 to 156. The plasmonic resonance is tuned from visible to mid‐infrared wavelength. The synthesis protocol relies on robust Au seeds synthesized inN,N‐dimethylformamide (DMF), which induces the one‐dimensional (1D) growth of Ag atoms. To maintain symmetry breaking initiated by the Au seeds, the reduction rate of Ag+is decreased by adding hexadecyltrimethylammonium chloride (CTAC) to form AgCl particles. The optimized conditions to prevent the homogeneous nucleation of Ag nanoparticles and residue of AgCl particles in products are identified, under which the conversion efficiency of Ag ions to Ag nanorods is evaluated about 48%. More importantly, the anisotropic Ag nanorods are self‐assembled into monolayers at interfaces with the long axis of Ag nanorods perpendicular or parallel to the interfaces, respectively. The as‐fabricated monolayers exhibit uniform and reproducible surface‐enhanced Raman scattering (SERS) activities. The optimal SERS performance is achieved from Ag nanorod monolayer with vertical orientation and the longest rod length.

     
    more » « less