Redox‐active anthraquinone molecules represent promising anolyte materials in aqueous organic redox flow batteries (AORFBs). However, the chemical stability issue and corrosion nature of anthraquinone‐based anolytes in reported acidic and alkaline AORFBs constitute a roadblock for their practical applications in energy storage. A feasible strategy to overcome these issues is migrating to pH‐neutral conditions and employing soluble AQDS salts. Herein, we report the 9,10‐anthraquinone‐2,7‐disulfonic diammonium salt
Several metal-free, nonaqueous, disproportionation redox-flow-battery chemistries based on electrochemically active organic molecules are presented. The electrochemistry of 9,10-diphenylanthracene (DPA), a polycyclic aromatic compound, involves two reversible redox couples separated by more than 3 V, which are associated with electrochemical disproportionation of the neutral molecule. Nonaqueous solvents are investigated with the dual aims of realizing this high voltage in a battery cell and maximizing active-species solubility. Functionalized DPA analogues are synthesized and shown to exhibit electrochemical responses similar to pristine DPA; appending diethyleneglycoxy esters on each phenyl group to form DdPA (9,10-Bis(4-(2-(2-methoxyethoxy)ethoxy)carbonyl-phenyl)anthracene) improves solubility over DPA by a factor of 20 in acetonitrile and 5 in dimethoxyethane. The 0.21 M maximum concentration of DdPA in dimethoxyethane suggests an energy density of 8 Wh l−1, which begins to approach the energy density of state-of-the-art aqueous RFBs. Charge/discharge of a stagnant one-dimensional cell delivers the highest cell voltages from an organic single-active-species RFB chemistry yet reported. Energy and power efficiencies for DPA in dimethoxyethane and DdPA in acetonitrile are similar to nonaqueous vanadium acetylacetonate in cells of similar construction.
more » « less- NSF-PAR ID:
- 10302769
- Publisher / Repository:
- The Electrochemical Society
- Date Published:
- Journal Name:
- Journal of The Electrochemical Society
- Volume:
- 167
- Issue:
- 7
- ISSN:
- 0013-4651
- Page Range / eLocation ID:
- Article No. 070517
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract AQDS(NH4)2 , as an anolyte material for pH‐neutral AORFBs with solubility of 1.9m in water, which is more than 3 times that of the corresponding sodium salt. Paired with an NH4I catholyte, the resulting pH‐neutral AORFB with an energy density of 12.5 Wh L−1displayed outstanding cycling stability over 300 cycles. Even at the pH‐neutral condition, theAQDS(NH4)2 /NH4I AORFB delivered an impressive energy efficiency of 70.6 % at 60 mA cm−2and a high power density of 91.5 mW cm−2at 100 % SOC. The present AQDS(NH4)2flow battery chemistry opens a new avenue to apply anthraquinone molecules in developing low‐cost and benign pH‐neutral flow batteries for scalable energy storage. -
Redox flow batteries (RFBs) present an opportunity to bridge the gap between the intermittent availability of green energy sources and the need for on-demand grid level energy storage. While aqueous vanadium-based redox flow batteries have been commercialized, they are limited by the constraints of using water as an electrochemical solvent. Nonaqueous redox flow battery systems can be used to produce high voltage batteries due to the larger electrochemical window in nonaqueous solvents and the ability to tune the redox properties of active materials through functionalization. Iron porphyrins, a class of organometallic macrocycles, have been the subject of many studies for their photocatalytic and electrocatalytic properties in nonaqueous solvents. Often, iron porphyrins can undergo multiple redox events making them interesting candidates for use as anolytes in asymmetrical redox flow batteries or as both catholyte and anolyte in symmetrical redox flow battery systems. Here the electrochemical properties of Fe(III)TPP species relevant to redox flow battery electrolytes are investigated including solubility, electrochemical properties, and charge/discharge cycling. Commonly used support electrolyte salts can have reactivities that are often overlooked beyond their conductivity properties in nonaqueous solvents. Parasitic reactions with the cations of common support electrolytes are highlighted herein, which underscore the careful balance required to fully assess the potential of novel RFB electrolytes.more » « less
-
more » « less
Abstract Lithium-based nonaqueous redox flow batteries (LRFBs) are alternative systems to conventional aqueous redox flow batteries because of their higher operating voltage and theoretical energy density. However, the use of ion-selective membranes limits the large-scale applicability of LRFBs. Here, we report high-voltage membrane-free LRFBs based on an all-organic biphasic system that uses Li metal anode and 2,4,6-tri-(1-cyclohexyloxy-4-imino-2,2,6,6-tetramethylpiperidine)-1,3,5-triazine (Tri-TEMPO), N-propyl phenothiazine (C3-PTZ), and tris(dialkylamino)cyclopropenium (CP) cathodes. Under static conditions, the Li||Tri-TEMPO, Li||C3-PTZ, and Li||CP batteries with 0.5 M redox-active material deliver capacity retentions of 98%, 98%, and 92%, respectively, for 100 cycles over ~55 days at the current density of 1 mA/cm2and a temperature of 27 °C. Moreover, the Li||Tri-TEMPO (0.5 M) flow battery delivers an initial average cell discharge voltage of 3.45 V and an energy density of ~33 Wh/L. This flow battery also demonstrates 81% of capacity for 100 cycles over ~45 days with average Coulombic efficiency of 96% and energy efficiency of 82% at the current density of 1.5 mA/cm2and at a temperature of 27 °C.
-
more » « less
Abstract The SeSe bond in an organo‐diselenide (RSeSeR, R is an organic group) can break in a 2e−reduction reaction, but it has limited capacity as a cathode material for rechargeable lithium‐ion batteries. To increase its capacity, redox active species (e.g., sulfur) can be added in the middle of the selenium atoms. Herein, phenyl diselenide (PDSe, PhSeSePh) is mixed with sulfur to form two hybrid compounds with 1:1 and 1:2 molar ratios, which almost double and triple the capacity of PDSe, respectively. Theoretical calculations suggest that phenyl selenosulfide (PDSe‐S, PhSe‐S‐SePh) and phenyl selenodisulfide (PDSe‐S2, PhSe‐SS‐SePh) can form via addition reactions, which is supported by mass spectrometry analysis. The hybrid materials exhibit three highly reversible redox plateaus and enhanced cycling stability due to the reduced solubility of the discharge products. PDSe‐S and PDSe‐S2show initial capacities of 252 and 330 mAh g−1, respectively, followed by stable cycling performance with a capacity retention of >73% after 200 cycles at C/5 rate. In addition, they show steady rate capabilities. This study reports a novel strategy to increase the electrochemical performance of organo‐diselenide by addition of sulfur.
-
more » « less
Abstract Aqueous organic redox flow batteries (AORFBs) have received increasing attention as an emergent battery technology for grid‐scale renewable energy storage. However, physicochemical properties of redox‐active organic electrolytes remain fine refinement to maximize their performance in RFBs. Herein, we report a carboxylate functionalized viologen derivative, N,N′‐dibutyrate‐4,4′‐bipyridinium,
(CBu)2V , as a highly stable, high capacity anolyte material under near pH neutral conditions.(CBu)2V can achieve solubility of 2.1 M and display a reversible, kinetically fast reduction at −0.43 V vs NHE at pH 9. DFT studies revealed that the high solubility of(CBu)2V is attributed to its high molecular polarity while its negative reduction potential is benefitted from electron‐donating carboxylate groups. A 0.89 V (CBu)2V /(NH)4Fe(CN)6AORFB demonstrated exceptional energy storage performance, specifically, 100 % capacity retention with a discharge energy density of 9.5 Wh L−1for 1000 cycles, power densities of up to 85 mW cm−2, and an energy efficiency of 70 % at 60 mA cm−2.(CBu)2V not only represents the most capacity dense viologen with pendant ionic groups and also exhibits the longest (1200 hours or 50 days) and the most stable flow battery performance to date.
