skip to main content


Title: Wastewater management strategies for sustained shale gas production
Abstract

Recent advances in shale gas development have largely outpaced efforts to manage associated waste streams that pose significant environmental risks. Wastewater management presents significant challenges in the Marcellus shale, where increasing fluid volumes concomitant with expanding development will threaten to overwhelm existing infrastructure over the next decade. In this work, we forecast growth in drilling, flowback, and produced fluid volumes through 2025 based on historic data and consider conventional and alternative disposal options to meet future demands. The results indicate that nearly 12 million m3(74 MMbbl) of wastewater will be generated annually by 2025. Even assuming wastewater recycling rates in the region rebound, meeting increased demands for wastewater that cannot be reused due to poor quality or logistics would require significant capital investment to expand existing disposal pathways, namely treatment and discharge at centralized facilities or dedicated brine injection in Ohio. Here, we demonstrate the logistical and environmental advantages of an alternative strategy: repurposing depleted oil and gas wells for dedicated injection of wastewater that cannot otherwise be reused or recycled. Hubs of depleted wells could accommodate projected increases in wastewater volumes more efficiently than existing disposal options, primarily because the proximity of depleted wells to active production sites would substantially reduce wastewater transport distances and associated costs. This study highlights the need to reevaluate regional-scale shale wastewater management practices in the context of evolving wastewater qualities and quantities, as strategic planning will result in more socially and economically favorable options while avoiding adverse environmental impacts that have overshadowed the environmental benefits of natural gas expansion in the energy sector.

 
more » « less
NSF-PAR ID:
10303279
Author(s) / Creator(s):
;
Publisher / Repository:
IOP Publishing
Date Published:
Journal Name:
Environmental Research Letters
Volume:
15
Issue:
2
ISSN:
1748-9326
Page Range / eLocation ID:
Article No. 024001
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Hydraulic fracturing of deep shale formations generates large volumes of wastewater that must be managed through treatment, reuse, or disposal. Produced wastewater liberates formation-derived radionuclides and contains previously uncharacterized organohalides thought to be generated within the shale well, both posing unknown toxicity to human and ecological health. Here, we assess the toxicity of 42 input media and produced fluid samples collected from four wells in the Utica formation and Marcellus Shale using two distinct endpoint screening assays. Broad spectrum acute toxicity was assessed using a bioluminescence inhibition assay employing the halotolerant bacterium Aliivibrio fischeri , while predictive mammalian cytotoxicity was evaluated using a N -acetylcysteine (NAC) thiol reactivity assay. The acute toxicity and thiol reactivity of early-stage flowback was higher than later produced fluids, with levels diminishing through time as the natural gas wells matured. Acute toxicity of early stage flowback and drilling muds were on par with the positive control, 3,5-dichlorophenol (6.8 mg L −1 ). Differences in both acute toxicity and thiol reactivity between paired natural gas well samples were associated with specific chemical additives. Samples from wells containing a larger diversity and concentration of organic additives resulted in higher acute toxicity, while samples from a well applying a higher composition of ammonium persulfate, a strong oxidizer, showed greater thiol reactivity, predictive of higher mammalian toxicity. Both acute toxicity and thiol reactivity are consistently detected in produced waters, in some cases present up to nine months after hydraulic fracturing. These results support that specific chemical additives, the reactions generated by the additives, or the constituents liberated from the formation by the additives contribute to the toxicity of hydraulic fracturing produced waters and reinforces the need for careful consideration of early produced fluid management. 
    more » « less
  2. Hydraulic fracturing requires the injection of large volumes of fluid to extract oil and gas from low permeability unconventional resources ( e.g. , shale, coalbed methane), resulting in the production of large volumes of highly complex and variable waste fluids. Shale gas fluid samples were collected from two hydraulically fractured wells in Morgantown, WV, USA at the Marcellus Shale Energy and Environment Laboratory (MSEEL) and analyzed using ultrahigh resolution mass spectrometry to investigate the dissolved organic sulfur (DOS) pool. Using a non-targeted approach, ions assigned DOS formulas were analyzed to identify dominant DOS classes, describe their temporal trends and their implications, and describe the molecular characteristics of the larger DOS pool. The average molecular weight of organic sulfur compounds in flowback decreased and was lowest in produced waters. The dominant DOS classes were putatively assigned to alcohol sulfate and alcohol ethoxysulfate surfactants, likely injected as fracturing fluid additives, on the basis of exact mass and homolog distribution matching. This DOS signature was identifiable 10 months after the initial injection of hydraulic fracturing fluid, and an absence of genes that code for alcohol ethoxysulfate degrading proteins ( e.g. , sulfatases) in the shale well genomes and metagenomes support that these additives are not readily degraded biologically and may continue to act as a chemical signature of the injected fluid. Understanding the diversity, lability, and fate of organic sulfur compounds in shale wells is important for engineering productive wells and preventing gas souring as well as understanding the consequences of unintended fluid release to the environment. The diversity of DOS, particularly more polar compounds, needs further investigation to determine if the identified characteristics and temporal patterns are unique to the analyzed wells or represent broader patterns found in other formations and under other operating conditions. 
    more » « less
  3. While development of the Utica/Point Pleasant Shale (UPP) is extensive in Ohio (U.S.) and increasing in Pennsylvania and West Virginia, few studies report the chemistry of produced waters from UPP wells. These data have important implications for developing best management practices for handling and waste disposal, or identifying the fluid in the event of accidental spill events. Here, we evaluated the elemental and isotope chemistry of UPP produced waters from 26 wells throughout Ohio, Pennsylvania, and West Virginia to determine any unique fluid chemistries that could be used for forensic studies. Compared to the Marcellus, UPP produced waters contain higher activities of total radium ( 226 Ra + 228 Ra) and higher 228 Ra/ 226 Ra ratios. As with the Marcellus Shale, elemental ratios (Sr/Ca) and isotope ratios ( 87 Sr/ 86 Sr) can distinguish UPP produced waters from many conventional oil and gas formations. Sr/Ca and 87 Sr/ 86 Sr ratios can fingerprint small fractions (∼0.1%) of UPP produced water in freshwater. However, because Marcellus and UPP produced waters display similar major elemental chemistry ( i.e. , Na, Ca, and Cl) and overlapping ratios of Sr/Ca and 87 Sr/ 86 Sr, 228 Ra/ 226 Ra ratios may be the best tracer to distinguish these waters. 
    more » « less
  4. null (Ed.)
    We investigate the influence of thermal stresses on induced seismicity in the context of geothermal energy production at Brawley and Coso in California. We resort to thermo-hydro-mechanical modeling and used measurements of surface deformation to validate our simulations. We find that thermal stresses induced by fluid injections for geothermal energy production play an important role in either triggering or impeding seismicity. We speculate that thermal stresses may also play an important role in inducing fracturing and seismicity in other context of fluid injection for CO2 storage, disposal of wastewater or unconventional oil and gas production for example 
    more » « less
  5. Abstract

    Wastewater disposal is generally accepted to be the primary cause of the increased seismicity rate in Oklahoma within the past decade, but no statewide analysis has investigated the contribution of hydraulic fracturing (HF) to the observed seismicity or the seismic hazard. Utilizing an enhanced seismicity catalog generated with multistation template matching from 2010 to 2016 and all available hydraulic fracturing information, we identified 274 HF wells that are spatiotemporally correlated with bursts of seismicity. The majority of HF‐induced seismicity cases occurred in the SCOOP/STACK plays, but we also identified prominent cases in the Arkoma Basin and some more complex potential cases along the edge of the Anadarko Platform. For HF treatments where we have access to injection parameters, modeling suggests that poroelastic stresses are likely responsible for seismicity, but we cannot rule out direct pore pressure effects as a contributing factor. In all of the 16 regions we identified, ≥75% of the seismicity correlated with reported HF wells. In some regions, >95% of seismicity correlated with HF wells and >50% of the HF wells correlated with seismicity. Overall, we found ~700 HF‐induced earthquakes withM ≥ 2.0, including 12 events withM3.0–3.5. These findings suggest state regulations implemented in 2018 that require operators in the SCOOP/STACK plays to take action if aM > 2 earthquake could have a significant impact on future operations.

     
    more » « less