skip to main content

Explore Research Products in the NSF-PAR

  • NSF Public Access
  • Search Results
  • Efficacy of cool roofs at reducing pedestrian-level air temperature during projected 21st century heatwaves in Atlanta, Detroit, and Phoenix (USA)
Title: Efficacy of cool roofs at reducing pedestrian-level air temperature during projected 21st century heatwaves in Atlanta, Detroit, and Phoenix (USA)
Abstract

The air temperature cooling impacts of infrastructure-based adaptation measures in expanding urban areas and under changing climatic conditions are not well understood. We present simulations conducted with the Weather Research and Forecasting (WRF) model, coupled to a multi-layer urban model that explicitly resolves pedestrian-level conditions. Our simulations dynamically downscale global climate projections, account for projected urban growth, and examine cooling impacts of extensive cool roof deployment in Atlanta, Detroit, and Phoenix (USA). The simulations focus on heatwave events that are representative of start-, middle-, and end-of-century climatic conditions. Extensive cool roof implementation is projected to cause a maximum city-averaged daytime air temperature cooling of 0.38 °C in Atlanta; 0.42 °C in Detroit; and 0.66 °C in Phoenix. We propose a means for practitioners to estimate the impact of cool roof treatments on pedestrian-level air temperature, for a chosen roof reflectivity, with a new metric called the Albedo Cooling Effectiveness (ACE). The ACE metric reveals that, on average, cool roofs in Phoenix are 11% more effective at lowering pedestrian-level air temperature than in Atlanta, and 30% more effective than in Detroit. Cool roofs remain similarly effective under future heatwaves relative to contemporary heatwaves for Atlanta and Detroit, with some indication of increased effectiveness under future heatwaves for Phoenix. By highlighting the underlying factors that drive cooling effectiveness in a trio of cities located in different climatic regions, we demonstrate a robust framework for estimating the pedestrian-level cooling impacts associated with reflective roofs without the need for computationally demanding simulations.

  more » « less
NSF-PAR ID:
10303658
Author(s) / Creator(s):
; ;
Publisher / Repository:
IOP Publishing
Date Published:
Journal Name:
Environmental Research Letters
Volume:
15
Issue:
8
ISSN:
1748-9326
Page Range / eLocation ID:
Article No. 084007
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; ; et al ( , Computational Urban Science)
    Abstract

    Cool materials and rooftop vegetation help achieve urban heating mitigation as they can reduce building cooling demands. This study assesses the cooling potential of different mitigation technologies using Weather Research and Forecasting (WRF)- taking case of a tropical coastal climate in the Kolkata Metropolitan Area. The model was validated using data from six meteorological sites. The cooling potential of eight mitigation scenarios was evaluated for: three cool roofs, four green roofs, and their combination (cool-city). The sensible heat, latent heat, heat storage, 2-m ambient temperature, surface temperature, air temperature, roof temperature, and urban canopy temperature was calculated. The effects on the urban boundary layer were also investigated.

    The different scenarios reduced the daytime temperature of various urban components, and the effect varied nearly linearly with increasing albedo and green roof fractions. For example, the maximum ambient temperature decreased by 3.6 °C, 0.9 °C, and 1.4 °C for a cool roof with 85% albedo, 100% rooftop vegetation, and their combination.

    The cost of different mitigation scenarios was assumed to depend on the construction options, location, and market prices. The potential for price per square meter and corresponding temperature decreased was related to one another. Recognizing the complex relationship between scenarios and construction options, the reduction in the maximum and minimum temperature across different cool and green roof cases were used for developing the cost estimates. This estimate thus attempted a summary of the price per degree of cooling for the different potential technologies.

    Higher green fraction, cool materials, and their combination generally reduced winds and enhanced buoyancy. The surface changes alter the lower atmospheric dynamics such as low-level vertical mixing and a shallower boundary layer and weakened horizontal convective rolls during afternoon hours. Although cool materials offer the highest temperature reductions, the cooling resulting from its combination and a green roof strategy could mitigate or reverse the summertime heat island effect. The results highlight the possibilities for heat mitigation and offer insight into the different strategies and costs for mitigating the urban heating and cooling demands.

     
    more » « less
  2. ; ( , ASME Journal of Engineering for Sustainable Buildings and Cities)
    null (Ed.)
    Abstract Air conditioning (AC) demand has recently grown to about 10% of total electricity globally, and the International Energy Agency (IEA) predicts that the cooling requirement for buildings globally increases by three-fold by 2050 without additional policy interventions. The impacts of these increases for energy demand for human comfort are more pronounced in tropical coastal areas due to the high temperatures and humidity and their limited energy resources. One of those regions is the Caribbean, where building energy demands often exceed 50% of the total electricity, and this demand is projected to increase due to a warming climate. The interconnection between the built environment and the local environment introduces the challenge to find new approaches to explore future energy demand changes and the role of mitigation measures to curb the increasing demands for vulnerable tropical coastal cities due to climate change. This study presents mid-of-century and end-of-century cooling demand projections along with demand alleviation measures for the San Juan Metropolitan Area in the Caribbean Island of Puerto Rico using a high-resolution configuration of the Weather Research and Forecasting (WRF) model coupled with Building Energy Model (BEM) forced by bias-corrected Community Earth Systems Model (CESM1) global simulations. The World Urban Database Access Portal Tool (WUDAPT) Land Class Zones (LCZs) bridge the gap required by BEM for their morphology and urban parameters. MODIS land covers land use is depicted for all-natural classes. The baseline historical period of 2008–2012 is compared with climate and energy projections in addition to energy mitigation options. Energy mitigation options explored include the integration of solar power in buildings, the use of white roofs, and high-efficiency heating, ventilation, and air conditioning (HVAC) systems. The impact of climate change is simulated to increase minimum temperatures at the same rate as maximum temperatures. However, the maximum temperatures are projected to rise by 1–1.5 °C and 2 °C for mid- and end-of-century, respectively, increasing peak AC demand by 12.5% and 25%, correspondingly. However, the explored mitigation options surpass both increases in temperature and AC demand. The AC demand reduction potential with energy mitigation options for 2050 and 2100 decreases the need by 13% and 1.5% with the historical periods. Overall, the demand reduction potential varies with LCZs showing a high reduction potential for sparsely built (32%), and low for compact low rise (21%) for the mid-of-century period compared with the same period without mitigation options. 
    more » « less
  3. ; ; ; ; ; ; ( , Frontiers in Sustainable Cities)
    Urban heat exposure is an increasing health risk among urban dwellers. Many cities are considering accommodating active mobility, especially walking and biking, to reduce greenhouse gas emissions. However, promoting active mobility without proper planning and transportation infrastructure to combat extreme heat exposure may cause more heat-related morbidity and mortality, particularly in future with projected climate change. This study estimated the effectiveness of active trip heat exposure mitigation under built environment and travel behavior change. Simulations of the Phoenix metro region's 624,987 active trips were conducted using the activity-based travel model (ABM), mean radiant temperature (T MRT , net human radiation exposure), transportation network, and local climate zones. Two scenarios were designed to reduce traveler exposure: one that focuses on built environment change (making neighborhoods cooler) and the other on travel behavior (switching from shorter travel time but higher exposure routes to longer travel time but cooler routes) change. Travelers experienced T MRT heat exposure ranging from 29°C to 76°C (84°F to 168°F) without environmental or behavioral change. Active trip T MRT exposures were reduced by an average of 1.2–3.7°C when the built environment was changed from a hotter to cooler design. Behavioral changes cooled up to 10 times more trips than changes in built environment changes. The marginal benefit of cooling decreased as the number of cooled corridors transformed increased. When the most traveled 10 km of corridors were cooled, the marginal benefit affected over 1,000 trips/km. However, cooling all corridors results in marginal benefits as low as 1 trip/km. The results reveal that heavily traveled corridors should be prioritized with limited resources, and the best cooling results come from environment and travel behavior change together. The results show how to surgically invest in travel behavior and built environment change to most effectively protect active travelers. 
    more » « less
  4. ; ; ( , Environmental Research Letters)
    Abstract

    Many urban climates are characterized by increased temperature and decreased relative humidity, under climate change and compared to surrounding rural landscapes. The two trends have contrasting effects on human-perceived heat stress. However, their combined impact on urban humid heat and adaptation has remained largely unclear. Here, we use simulations from an earth system model to investigate how urbanization coupled with climate change affects urban humid heat stress, exposure, and adaptation. Our results show that urban humid heat will increase substantially across the globe by 3.1 °C by the end of the century under a high emission scenario. This projected trend is largely attributed to climate change-driven increases in specific humidity (1.8 °C), followed by air temperature (1.4 °C)—with urbanization impacts varying by location and of a smaller magnitude. Urban humid heat stress is projected to be concentrated in coastal, equatorial areas. At least 44% of the projected urban population in 2100, the equivalent of over 3 billion people worldwide, is projected to be living in an urban area with high humid heat stress. We show a critical, climate-driven dilemma between cooling efficacy and water limitation of urban greenery-based heat adaptation. Insights from our study emphasize the importance of using urban-explicit humid heat measures for more accurate assessments of urban heat exposure and invite careful evaluation of the feasibility of green infrastructure as a long-term cooling strategy.

     
    more » « less
  5. ; ; ; ; ( , Environmental Research Letters)
    Abstract Climate change is expected to exacerbate the urban heat island (UHI) effect in cities worldwide, increasing the risk of heat-related morbidity and mortality. Solar reflective ‘cool pavement’ is one of several mitigation strategies that may counteract the negative effects of the UHI effect. An increase in pavement albedo results in less heat absorption, which results in reduced surface temperatures ( T surface ). Near surface air temperatures ( T air ) could also be reduced if cool pavements are deployed at sufficiently large spatial scales, though this has never been confirmed by field measurements. This field study is the first to conduct controlled measurements of the impacts of neighborhood-scale cool pavement installations. We measured the impacts of cool pavement on albedo, T surface , and T air . In addition, pavement albedo was monitored after installation to assess its degradation over time. The field site (∼0.64 km 2 ) was located in Covina, California; ∼30 km east of Downtown Los Angeles. We found that an average pavement albedo increase of 0.18 (from 0.08 to 0.26) corresponded to maximum neighborhood averaged T surface and T air reductions of 5 °C and 0.2 °C, respectively. Maximum T surface reductions were observed in the afternoon, while minimum reductions of 0.9 °C were observed in the morning. T air reductions were detected at 12:00 local standard time (LST), and from 20:00 LST to 22:59 LST, suggesting that cool pavement decreases T air during the daytime as well as in the evening. An average albedo reduction of 30% corresponded to a ∼1 °C reduction in the T surface cooling efficacy. Although we present here the first measured T air reductions due to cool pavement, we emphasize that the tradeoffs between T air reductions and reflected shortwave radiation increases are still unclear and warrant further investigation in order to holistically assess the efficacy of cool pavements, especially with regards to pedestrian thermal comfort. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email