A series of experiments were conducted to investigate the melting of ice adjacent to a
water-immiscible liquid layer (n-dodecane) exposed to radiation from above. The
experimental setup consisted of a borosilicate container containing an ice wall and a
layer of n-dodecane heated from above. In addition to tracking the movement of the
melt front, Particle Image Velocimetry (PIV) and Background Oriented Schlieren (BOS)
measurements were conducted on the liquid-phase . Two distinct melting regimes
were found to dominate the melting process. First was the uniform melting across the
contact area with the immiscible liquid layer for low radiation levels (~1 kW/m 2 ).
Second was the lateral intrusion regime, where a depression near free surface of the
liquid forms in ice and grows laterally for radiation level greater than ~1 kW/m 2 . The
ice surface remained flat and smooth in uniform melting regime, whereas in the lateral
intrusion regime a series of rivulets were formed that carved valleys on the ice. PIV
measurements showed a surface flow toward the ice for all heat flux levels caused by
surface-tension forces. Increase of the heat flux levels caused a transition to multi-roll
structure in the flow field. This multi-roll structure, which is accompanied by a
recirculation zone near the ice, increased heat transfer coefficient near the surface of
the liquid causing lateral intrusion regime. BOS measurements indicated presence of
density gradients below the free surface of n-dodecane and in regions near ice that are
caused by local small-scale temperature gradients. The current experiments were
conducted to explore the melting dynamics and to shed light on the processes that
influence the ice melting. Implications of such mechanisms in a real-life scenario, i.e.
oil spill in ice-infested waters, needs to be explored further by using more liquids and
improved accuracy with diagnostic techniques.
more »
« less
Flow Field Study of a Top Heated Immiscible Liquid Layer Adjacent to Ice
A series of experiments were conducted to investigate the flow field of a top-heated liquid fuel adjacent to an ice block. The experimental setup consisted of a borosilicate container containing an ice wall and a layer of n-heptane heated from above. Particle Image Velocimetry (PIV) and Background Oriented Schlieren (BOS) measurements were conducted on the liquid -phase. PIV measurements showed a surface flow toward the ice caused by surface -tension forces, which is driven by the horizontal temperature gradients on the liquid surface. A recirculation zone was observed under the free surface and near the ice. The combination of the two flow patterns caused lateral intrusion in the ice, instead of a uniform melting across ice surface. BOS measurements indicated presence of density gradients below the free surface of n-heptane and in regions near the ice block. These density gradients were created by local small-scale temperature gradients. The current experiments were conducted to explore the processes that influence the ice melting by immiscible liquid layers.
more »
« less
- Award ID(s):
- 1938976
- NSF-PAR ID:
- 10303700
- Date Published:
- Journal Name:
- 14th International Symposium on Particle Image Velocimetry
- Volume:
- 1
- Issue:
- 1
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
An experimental study was conducted to examine the dynamic ice accretion process upon the impingement of microsized, airborne ice particles/crystals onto a heated test surface pertinent to aeroengine icing phenomena. The experimental study was conducted in a specially designed ice crystal icing test facility to generate and inject microsized ice particles into a frozen-cold airflow. The microsized ice particles were forced to impinge onto a heated test plate with controllable surface temperatures. Upon impingement of the ice particles onto the heated test surface, the dynamic ice accretion process was found to take place over the heated surface in three distinct stages: 1) an ice-melting stage at the beginning, followed by 2) an ice/water mixture formation stage, and then 3) a water refreezing stage, causing the formation of a solid ice layer accreted on the heated test surface eventually. After impinging onto the test plate, while small ice particles with spheric shapes were found to be more ready to bounce off from the test surface, large, nonspheric-shaped ice particles experienced a catastrophic fragmentation process and break up into smaller pieces with noticeable impingement residues remaining on the test surface. The formation of a liquid water film layer on the test surface due to the melting of the impinged ice particles was found to be very beneficial to make more impinged ice particles stay sticking on the test surface, resulting in a rapid growth of the water/ice layer accreted on the heated test surface. A comprehensive theoretical analysis was also performed to examine the unsteady heat transfer characteristics during the dynamic ice accretion process. The theoretic predictions of the collection efficiency of the impinged ice particles on the heated test surface and the temperature variations of the water layer at the initial ice-melting stage were found to agree well with the experimental measurement results.more » « less
-
more » « less
Abstract Arctic oil spills are particularly detrimental as they could cause extensive ice melting in addition to the environmental pollution they create. Floating oil slicks amongst ice floes absorb ambient energy and transfer that energy to the ice to aggravate melting in the thaw season. However, few studies have been undertaken to reveal how oil-ice interactions impact ice melting. This research employs a measurement technique to investigate the heat transfer pathways from oil slicks to the ice. Dual-luminescence imaging and particle imaging velocimetry (PIV) in a side cooled cavity is performed for temperature and velocity measurements of Toluene, respectively. Dual-luminescence imaging captured the spatial temperature distribution of the fuel. Consecutive imaging of the seeding particles in PIV provided the spatial velocity field of the fuel in the cavity. The results show that the convective field is directly coupled with the temperature field, i.e., the temperature difference instigates a flow in the liquid. Successful implementation of the two measuring techniques together is a step toward analyzing heat transfer pathways in a liquid fuel adjacent to an ice body, indicating the extent of melting.
-
Arctic oil spills are particularly detrimental as they could cause extensive ice melting in addition to the environmental pollution they create. Floating oil slicks amongst ice floes absorb ambient energy and transfer that energy to the ice to aggravate melting in the thaw season. However, few studies have been undertaken to reveal how oil-ice interactions impact ice melting. This research employs a measurement technique to investigate the heat transfer pathways from oil slicks to the ice. Dual-luminescence imaging and particle imaging velocimetry (PIV) in a side cooled cavity is performed for temperature and velocity measurements of Toluene, respectively. Dual-luminescence imaging captured the spatial temperature distribution of the fuel. Consecutive imaging of the seeding particles in PIV provided the spatial velocity field of the fuel in the cavity. The results show that the convective field is directly coupled with the temperature field, i.e., the temperature difference instigates a flow in the liquid. Successful implementation of the two measuring techniques together is a step toward analyzing heat transfer pathways in a liquid fuel adjacent to an ice body, indicating the extent of melting.more » « less
-
null (Ed.)Due to the longer auto-ignition time with liquid fuels compared with hydrogen, the understanding of interaction of shock waves with sprays and the subsequent vapor mixing is significant to design ramjets/scramjets with liquid fuel sprays. In this study, an Eulerian-Lagrangian framework is developed based on the OpenFOAM platform. In this solver, detailed multi-component transport models for Eulerian gas-phase species properties are included. In addition, Lagrangian spray break-up, atomization and evaporation models are added to simulate liquid phase. In addition, an equilibrium wall function is added to model the near-wall properties. The newly developed solver is used to conduct large eddy simulations (LES) on non-reactive liquid jets in supersonic crossflow (JISCF) with liquid sprays. The liquid penetration length are compared with the experimental data, showing a very good agreement. Effects of evaporation and fuel properties (e.g., heat capacity and enthalpy of evaporation) on penetration length, temperature, Sauter mean diameter (SMD) and volumetric parcel flux are discussed in this study. It is shown that evaporation effects primarily show up in the temperature field. For n-heptane sprays, such impact could be conducted to other properties of the flow field like spray plume size, particle size distribution and volumetric flux, which is caused by the smaller enthalpy of evaporation and heat capacity comparing to water. Full version of this paper has been published as a journal article: Shufan Zou, Dezhi Zhou, Suo Yang, “Effects of Evaporation and Fuel Properties on Liquid Jets in Supersonic Crossflow: a Computational study using a compressible Eulerian-Lagrangian solver”, Atomization and Sprays 30 (9) (2020) 675-696. https://doi.org/10.1615/AtomizSpr.2020034860more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.18409/ispiv.v1i1.25
