Gas‐separation polymer membranes display a characteristic permeability–selectivity trade‐off that has limited their industrial use. The most comprehensive approach to improving performance is to devise strategies that simultaneously increase fractional free volume, narrow free volume distribution, and enhance sorption selectivity, but generalizable methods for such approaches are exceedingly rare. Here, we present an in situ crosslinking and solid‐state deprotection method to access previously inaccessible sorption and diffusion characteristics in amine‐functionalized polymers of intrinsic microporosity. Free volume element (FVE) size can be increased while preserving a narrow FVE distribution, enabling below‐upper bound polymers to surpass the H2/N2, H2/CH4, and O2/N2upper bounds and improving CO2‐based selectivities by 200 %. This approach can transform polymers into chemical analogues with improved performance, thereby overcoming traditional permeability–selectivity trade‐offs.
Polymers of intrinsic microporosity (PIMs) have shown promise in pushing the limits of gas separation membranes, recently redefining upper bounds for a variety of gas pair separations. However, many of these membranes still suffer from reductions in permeability over time, removing the primary advantage of this class of polymer. In this work, a series of pentiptycene-based PIMs incorporated into copolymers with PIM-1 are examined to identify fundamental structure–property relationships between the configuration of the pentiptycene backbone and its accompanying linear or branched substituent group. The incorporation of pentiptycene provides a route to instill a more permanent, configuration-based free volume, resistant to physical aging via traditional collapse of conformation-based free volume. PPIM-ip-C and PPIM-np-S, copolymers with C- and S-shape backbones and branched isopropoxy and linear
- PAR ID:
- 10306488
- Publisher / Repository:
- Proceedings of the National Academy of Sciences
- Date Published:
- Journal Name:
- Proceedings of the National Academy of Sciences
- Volume:
- 118
- Issue:
- 37
- ISSN:
- 0027-8424
- Page Range / eLocation ID:
- Article No. e2022204118
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Abstract Gas‐separation polymer membranes display a characteristic permeability–selectivity trade‐off that has limited their industrial use. The most comprehensive approach to improving performance is to devise strategies that simultaneously increase fractional free volume, narrow free volume distribution, and enhance sorption selectivity, but generalizable methods for such approaches are exceedingly rare. Here, we present an in situ crosslinking and solid‐state deprotection method to access previously inaccessible sorption and diffusion characteristics in amine‐functionalized polymers of intrinsic microporosity. Free volume element (FVE) size can be increased while preserving a narrow FVE distribution, enabling below‐upper bound polymers to surpass the H2/N2, H2/CH4, and O2/N2upper bounds and improving CO2‐based selectivities by 200 %. This approach can transform polymers into chemical analogues with improved performance, thereby overcoming traditional permeability–selectivity trade‐offs.
-
more » « less
Abstract Graphene oxide (GO) nanosheets stacked in parallel with subnanometer channels can exhibit an excellent size‐sieving ability for membrane‐based gas separation. However, gas molecules have to diffuse through the tortuous nanochannels, leading to low permeability. Herein we demonstrate two versatile approaches to modify the GO (before membrane fabrication by vacuum‐filtration) to collectively increase gas permeability, etching using hydrogen peroxide to generate in‐plane nanopores and acidifying using hydrochloric acid. For example, a membrane prepared at a pH of 5.0 using the 4‐h‐etched GO (HGO‐4h) shows He permeability of 5.3 Barrer and He/CH4selectivity of 800, which are 5 times and 1.5 times those of the GO membranes, respectively. Decreasing the pH from 5.0 to 2.0 for HGO‐4h enhances He permeability to 57 Barrer and He/CH4selectivity to 1,800. The HGO‐4h prepared at the pH of 2.0 exhibits separation properties of H2/CO2, H2/N2, He/N2, and He/CH4surpassing their corresponding upper bounds.
-
more » « less
Abstract Mixed matrix membranes (MMMs) comprising size‐sieving fillers dispersed in polymers exhibit diffusivity selectivity and may surpass the upper bound for gas separation, but their performance is limited by defects at the polymer/filler interface. Herein, a fundamentally different approach employing a highly sorptive filler that is inherently less sensitive to interfacial defects is reported. Palladium nanoparticles with extremely high H2sorption are dispersed in polybenzimidazole at loadings near the percolation threshold, which increases both H2permeability and H2/CO2selectivity. Performance of these MMMs surpasses the state‐of‐the‐art upper bound for H2/CO2separation with polymer‐based membranes. The success of these sorption‐enhanced MMMs for H2/CO2separation may launch a new research paradigm that taps the enormous knowledge of affinities between gases and nanomaterials to design MMMs for a wide variety of gas separations.
-
more » « less
Abstract Polyimides (PI) synthesized from 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride (6FDA) with various diamines have been frequently studied as gas separation membranes. The use of 6FDA in polyimides creates a bent structure than can increase fractional free volume (FFV) and gas permeability. Here, we demonstrate that 6FDA is also a useful building block for PI‐ionene materials, which contain cations directly within the polymer backbone. These new 6FDA‐containing PI‐ionenes were combined with several different imidazolium ionic liquids (ILs) to form thin membranes. The thermal properties of all the derivatives were investigated to determine the relationship between regiochemistry and degradation as well as the intermolecular forces that are present within these structures. The gas separation properties of these 6FDA‐containing PI‐ionene + IL materials were investigated, showing modest CO2permeabilities similar to other polyimide‐ionenes and CO2/CH4and CO2/N2permselectivities that were relatively higher than other polyimide‐ionenes.
