Microorganisms are commonly found swimming in complex biological fluids such as mucus and these fluids respond elastically to deformation. These viscoelastic fluids have been previously shown to affect the swimming kinematics of these microorganisms in non-trivial ways depending on the rheology of the fluid, the particular swimming gait and the structural properties of the immersed body. In this report we put forth a previously unmentioned mechanism by which swimming organisms can experience a speed increase in a viscoelastic fluid. Using numerical simulations and asymptotic theory we find that significant swirling flow around a microscopic swimmer couples with the elasticity of the fluid to generate a marked increase in the swimming speed. We show that the speed enhancement is related to the introduction of mixed flow behind the swimmer and the presence of hoop stresses along its body. Furthermore, this effect persists when varying the fluid rheology and when considering different swimming gaits. This, combined with the generality of the phenomenon (i.e. the coupling of vortical flow with fluid elasticity near a microscopic swimmer), leads us to believe that this method of speed enhancement could be present for a wide range of microorganisms moving through complex fluids.
more »
« less
Squirmers with swirl at low Weissenberg number
We investigate aspects of the spherical squirmer model employing both large-scale numerical simulations and asymptotic methods when the squirmer is placed in weakly elastic fluids. The fluids are modelled by differential equations, including the upper-convected Maxwell (UCM)/Oldroyd-B, finite-extensibility nonlinear elastic model with Peterlin approximation (FENE-P) and Giesekus models. The squirmer model we examine is characterized by two dimensionless parameters related to the fluid velocity at the surface of the micro-swimmer: the slip parameter $\xi $ and the swirl parameter $\zeta $ . We show that, for swimming in UCM/Oldroyd-B fluids, the elastic stress becomes singular at a critical Weissenberg number, Wi , that depends only on $\xi$ . This singularity for the UCM/Oldroyd-B models is independent of the domain exterior to the swimmer, or any other forces considered in the momentum balance for the fluid – we believe that this is the first time such a singularity has been explicitly demonstrated. Moreover, we show that the behaviour of the solution at the poles is purely extensional in character and is the primary reason for the singularity in the Oldroyd-B model. When the Giesekus or the FENE-P models are utilized, the singularity is removed. We also investigate the mechanism behind the speed and rotation rate enhancement associated with the addition of swirl in the swimmer's gait. We demonstrate that, for all models, the speed is enhanced by swirl, but the mechanism of enhancement depends intrinsically on the rheological model employed. Special attention is paid to the propulsive role of the pressure and elucidated upon. We also study the region of convergence of the perturbation solutions in terms of Wi . When techniques that accelerate the convergence of series are applied, transformed solutions are derived that are in very good agreement with the results obtained by simulations. Finally, both the analytical and numerical results clearly indicate that the low- Wi region is more important than one would expect and demonstrate all the major phenomena observed when swimming with swirl in a viscoelastic fluid.
more »
« less
- Award ID(s):
- 1803765
- NSF-PAR ID:
- 10308895
- Date Published:
- Journal Name:
- Journal of Fluid Mechanics
- Volume:
- 911
- ISSN:
- 0022-1120
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Biological and artificial microswimmers often encounter fluid media with non-Newtonian rheological properties. In particular, many biological fluids such as blood and mucus are shear-thinning. Recent studies have demonstrated how shear-thinning rheology can impact substantially the propulsion performance in different manners. In this work, we examine the effect of geometrical shape upon locomotion in a shear-thinning fluid using a prolate spheroidal squirmer model. We use a combination of asymptotic analysis and numerical simulations to quantify how particle geometry impacts the speed and the energetic cost of swimming. The results demonstrate the advantages of spheroidal over spherical swimmers in terms of both swimming speed and energetic efficiency when squirming through a shear-thinning fluid. More generally, the findings suggest the possibility of tuning the swimmer geometry to better exploit non-Newtonian rheological behaviours for more effective locomotion in complex fluids.more » « less
-
The development of novel drug delivery systems, which are revolutionizing modern medicine, is benefiting from studies on microorganisms’ swimming. In this paper we consider a model microorganism (a squirmer) enclosed in a viscous droplet to investigate the effects of medium heterogeneity or geometry on the propulsion speed of the caged squirmer. We first consider the squirmer and droplet to be spherical (no shape effects) and derive exact solutions for the equations governing the problem. For a squirmer with purely tangential surface velocity, the squirmer is always able to move inside the droplet (even when the latter ceases to move as a result of large fluid resistance of the heterogeneous medium). Adding radial modes to the surface velocity, we establish a new condition for the existence of a co-swimming speed (where squirmer and droplet move at the same speed). Next, to probe the effects of geometry on propulsion, we consider the squirmer and droplet to be in Newtonian fluids. For a squirmer with purely tangential surface velocity, numerical simulations reveal a strong dependence of the squirmer's speed on shapes, the size of the droplet and the viscosity contrast. We found that the squirmer speed is largest when the droplet size and squirmer's eccentricity are small, and the viscosity contrast is large. For co-swimming, our results reveal a complex, non-trivial interplay between the various factors that combine to yield the squirmer's propulsion speed. Taken together, our study provides several considerations for the efficient design of future drug delivery systems.more » « less
-
more » « less
We conduct experiments with flexible swimmers to address the impact of fluid viscoelasticity on their locomotion. The swimmers are composed of a magnetic head actuated in rotation by a frequency-controlled magnetic field and a flexible tail whose deformation leads to forward propulsion. We consider both viscous Newtonian and glucose-based Boger fluids with similar viscosities. We find that the elasticity of the fluid systematically enhances the locomotion speed of the swimmer and that this enhancement increases with Deborah number. Using particle image velocimetry to visualize the flow field, we find a significant difference in the amount of shear between the rear and leading parts of the swimmer head. We conjecture that viscoelastic normal stresses lead to a net elastic forces in the swimming direction and thus a faster swimming speed.
-
null (Ed.)We investigate the self-propulsion of an inertial swimmer in a linearly density stratified fluid using the archetypal squirmer model which self-propels by generating tangential surface waves. We quantify swimming speeds for pushers (propelled from the rear) and pullers (propelled from the front) by direct numerical solution of the Navier–Stokes equations using the finite volume method for solving the fluid flow and the distributed Lagrange multiplier method for modelling the swimmer. The simulations are performed for Reynolds numbers ( $Re$ ) between 5 and 100 and Froude numbers ( $Fr$ ) between 1 and 10. We find that increasing the fluid stratification strength reduces the swimming speeds of both pushers and pullers relative to their speeds in a homogeneous fluid. The increase in the buoyancy force experienced by these squirmers due to the trapping of lighter fluid in their respective recirculatory regions as they move in the heavier fluid is one of the reasons for this reduction. With increasing the stratification, the isopycnals tend to deform less, which offers resistance to the flow generated by the squirmers around them to propel themselves. This resistance increases with stratification, thus, reducing the squirmer swimming velocity. Stratification also stabilizes the flow around a puller keeping it axisymmetric even at high $Re$ , thus, leading to stability which is otherwise absent in a homogeneous fluid for $Re$ greater than $O(10)$ . On the contrary, a strong stratification leads to instability in the motion of pushers by making the flow around them unsteady and three-dimensional, which is otherwise steady and axisymmetric in a homogeneous fluid. A pusher is a more efficient swimmer than a puller owing to efficient convection of vorticity along its surface and downstream. Data for the mixing efficiency generated by individual squirmers explain the trends observed in the mixing produced by a swarm of squirmers.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1017/jfm.2020.987
