skip to main content

Explore Research Products in the NSF-PAR

Title: Energy Stored and Capacitance of a Circular Parallel Plate Nanocapacitor
Nanocapacitors have received a great deal of attention in recent years due to the promises of high energy storage density as device scaling continues unabated in the nanoscale era. High energy storage capacity is a key ingredient for many nanoelectronic applications in which the significant consumption of energy is required. The electric properties of a nanocapacitor can be strongly modified from the expected bulk properties due to finite-size effects which means that there is an increased need for the accurate characterization of its properties. In this work, we considered a theoretical model for a circular parallel plate nanocapacitor and calculated exactly, in closed analytic form, the electrostatic energy stored in the nanocapacitor as a function of the size of the circular plates and inter-plate separation. The exact expression for the energy is used to derive an analytic formula for the geometric capacitance of this nanocapacitor. The results obtained can be readily amended to incorporate the effects of a dielectric thin film filling the space between the circular plates of the nanocapacitor.  more » « less
Award ID(s):
2001980
NSF-PAR ID:
10309796
Author(s) / Creator(s):
Date Published:
Journal Name:
Nanomaterials
Volume:
11
Issue:
5
ISSN:
2079-4991
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ( , Monthly Notices of the Royal Astronomical Society)
    null (Ed.)
    ABSTRACT Advances in instrumentation have recently extended detailed measurements of gas kinematics to large samples of high-redshift galaxies. Relative to most nearby, thin disc galaxies, in which gas rotation accurately traces the gravitational potential, the interstellar medium (ISM) of $z$ ≳ 1 galaxies is typically more dynamic and exhibits elevated turbulence. If not properly modelled, these effects can strongly bias dynamical mass measurements. We use high-resolution FIRE-2 cosmological zoom-in simulations to analyse the physical effects that must be considered to correctly infer dynamical masses from gas kinematics. Our analysis covers a range of galaxy properties from low-redshift Milky-Way-mass galaxies to massive high-redshift galaxies (M⋆ > 1011 M⊙ at $z$ = 1). Selecting only snapshots where a disc is present, we calculate the rotational profile $\bar{v}_\phi (r)$ of the cool ($10^{3.5}\,\lt {\it T}\lt 10^{4.5}~\rm {K}$) gas and compare it to the circular velocity $v_{\rm c}=\sqrt{GM_{\rm enc}/r}$. In the simulated galaxies, the gas rotation traces the circular velocity at intermediate radii, but the two quantities diverge significantly in the centre and in the outer disc. Our simulations appear to over-predict observed rotational velocities in the centres of massive galaxies (likely from a lack of black hole feedback), so we focus on larger radii. Gradients in the turbulent pressure at these radii can provide additional radial support and bias dynamical mass measurements low by up to 40 per cent. In both the interior and exterior, the gas’ motion can be significantly non-circular due to e.g. bars, satellites, and inflows/outflows. We discuss the accuracy of commonly used analytic models for pressure gradients (or ‘asymmetric drift’) in the ISM of high-redshift galaxies. 
    more » « less
  2. ; ; ; ( , Journal of sound and vibration)
    Flow-induced vibrations of flexible surfaces driven by coherent vortical structures are ubiquitous in engineering and biological flows; from the extraction of fluidic energy via oscillating electro-active polymers to vocal fold dynamics during voiced speech production. These scenarios may involve either discrete or periodic loading conditions due to the advection of vortices past the structure. This work considers, as a function of the vortex production frequency, the fluid-structure interaction that occurs as vortices are propagated tangentially over flexible plates with variable structural properties. Velocity fields are acquired with particle image velocimetry and used to compute the vorticity and pressure fields, while the plate energy is estimated from its kinematics. Primary and secondary peaks in plate deflection amplitude and the plate energy as a function of vortex production frequency are observed at integer fractions of the fundamental plate frequency. At resonance conditions, plate energy relative to discrete vortex loading is increased by approximately three orders of magnitude, while the sub-harmonics increase the plate energy by about two orders of magnitude. Additional physical influences on the energy exchange process, including vortex-to-plate spacing and Strouhal number, are also investigated, detailing the importance of spatial and temporal interactions. The magnitude of the initial plate deflection as the vortex ring approaches the plate, due to persistent vibrations from previous interactions, is shown to retard the time at which the maximum load is applied as the increased relative vortex-to-plate spacing weakens cross-sign vorticity interactions. Finally, plate properties are scaled to model the structural properties of the vocal folds and the effect of intra-glottal vortices on vocal fold dynamics is quantified, where a negligible influence is observed. 
    more » « less
  3. ; ; ; ; ; ( , ASME 2020 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems)
    null (Ed.)
    Abstract

    In today’s world, most data centers have multiple racks with numerous servers in each of them. The high amount of heat dissipation has become the largest server-level cooling problem for the data centers. The higher dissipation required, the higher is the total energy required to run the data center. Although still the most widely used cooling methodology, air cooling has reached its cooling capabilities especially for High-Performance Computing data centers. Liquid-cooled servers have several advantages over their air-cooled counterparts, primarily of which are high thermal mass, lower maintenance. Nano-fluids have been used in the past for improving the thermal efficiency of traditional dielectric coolants in the power electronics and automotive industry. Nanofluids have shown great promise in improving the convective heat transfer properties of the coolants due to a proven increase in thermal conductivity and specific heat capacity.

    The present research investigates the thermal enhancement of the performance of de-ionized water-based dielectric coolant with Copper nanoparticles for a higher heat transfer from the server cold plates. Detailed 3-D modeling of a commercial cold plate is completed and the CFD analysis is done in a commercially available CFD code ANSYS CFX. The obtained results compare the improvement in heat transfer due to improvement in coolant properties with data available in the literature.

     
    more » « less
  4. ; ; ; ; ; ; ; ; ( , New Journal of Physics)
    Abstract

    We describe and analyze in detail the shapes of Fe islands encapsulated under the top graphene layers in graphite. Shapes are interrogated using scanning tunneling microscopy. The main outputs of the shape analysis are the slope of the graphene membrane around the perimeter of the island, and the aspect ratio of the central metal cluster. Modeling primarily uses a continuum elasticity (CE) model. As input to the CE model, we use density functional theory to calculate the surface energy of Fe, and the adhesion energies between Fe and graphene or graphite. We use the shaft-loaded blister test (SLBT) model to provide independent stretching and bending strain energies in the graphene membrane. We also introduce a model for the elastic strain in which stretching and bending are treated simultaneously. Measured side slopes agree very well with the CE model, both qualitatively and quantitatively. The fit is optimal for a graphene membrane consisting of 2–3 graphene monolayers, in agreement with experiment. Analysis of contributions to total energy shows that the side slope depends only on the properties of graphene/graphite. This reflects delamination of the graphene membrane from the underlying graphite, caused by upward pressure from the growing metal cluster. This insight leads us to evaluate the delamination geometry in the context of two related, classic models that give analytic results for the slope of a delaminated membrane. One of these, the point-loaded circular blister test model, reasonably predicts the delamination geometry at the edge of an Fe island. The aspect ratio also agrees well with the CE model in the limit of large island size, but not for small islands. Previously, we had speculated that this discrepancy was due to lack of coupling between bending and stretching in the SLBT model, but the new modeling shows that this explanation is not viable.

     
    more » « less
  5. ; ; ; ; ( , Transactions of the Society for Biomaterials)
    Statement of Purpose Hybrid nanoparticles in which a polymer is used to stabilize the secondary structure of enzyme provide a means to preserve its activity in non-native environments. This approach is illustrated here with horseradish peroxidase (HRP), an important heme enzyme used in medical diagnostic, biosensing, and biotechnological applications. Polymer chaperones in these polymer-enzyme complex (PEC) nanoparticles can enhance the utility of enzymes in unfavorable environments. Structural analysis of the PECs is a crucial link in the machine-learning driven iterative optimization cycle of polymer synthesis and testing. Here, we discuss the utility of small-angle X-ray scattering (SAXS) and quartz crystal microbalance with dissipation (QCMD) for evaluating PECs. Materials and Methods Six polymers were synthesized by automated photoinduced electron/energy transfer-reversible addition-fragmentation chain-transfer (PET-RAFT) polymerization directly in 96-well plates.1 Multiple molar ratios of enzyme:polymer (1:1, 1:5, 1:10, and 1:50) were characterized. HRP was mixed with the polymer and heated to 65 °C for 1 hr to form PECs. Enzyme assay and circular dichroism measurements were performed along with SAXS and QCMD to understand polymer-protein interactions. SAXS data were obtained at NSLS-II beamline 16-ID. Results and Discussion SAXS data were analyzed to determine the radius of gyration (Rg), Porod exponent and pair distance distribution functions (P(r)) (Figure 1). Rg, which corresponds to the size of the PEC nanoparticles, is sensitive to the polydispersity of the solution and does not change significantly in the presence of the polymer GEP1. Notably, the maximal dimension does not change as significantly upon heating to denaturation in the case of the PEC as it does with HRP alone. The effect of denaturation induced by heating seems to depend on the molar ratio of the polymer to enzyme. The Porod exponent, which is related to roughness, decreased from about 4 to 3 upon complexation indicating polymer binding to the enzyme’s surface. These were confirmed by modeling the structures of the HRP, the polymer and the PEC were modeled using DAMMIF/DAMMIN and MONSA (ATSAS software). The changes observed in the structure could be correlated to the measured enzymatic activity. Figure 2 shows the evolution of the PEC when the polymer is deposited onto the enzyme immobilized on Figure 1. P(r) plots for PEC vs. HRP before and after heating, illustrating the increased enzymatic stability due to polymer additives. gold-coated QCM sensors. The plots show the changes in frequency (f) and dissipation (D) with time as HRP is first deposited and is followed by the adsorption of the polymer. Large f and D show that the polymer forms a complex with HRP. Such changes were not observed with negative controls, Pluronics and poly(ethylene glycol). Comparison of the data from free particles in solution with QCM data from immobilized enzymes, shows that the conformation of the complexes in solution and surface-bound HRP could be different. This way, we were able to explore the various states of complex formation under different conditions with different polymers. Figure 2. QCMD data showing the interaction between the immobilized HRP and the polymer. 3rd and 5th harmonics are plotted (blue -f; red-D). Conclusion SAXS and QCMD data show that stabilization of the enzyme activity by inhibiting the unraveling of the secondary structure as seen in size, surface roughness, pair distribution function and percent helicity. Acknowledgment This work was supported by NSF grant 2009942. References [1] Tamasi, M, et al. Adv Intell Syst 2020, 2(2): 1900126. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email