Bacteria often attach to surfaces and grow densely-packed communities called biofilms. As biofilms grow, they expand across the surface, increasing their surface area and access to nutrients. Thus, the overall growth rate of a biofilm is directly dependent on its “range expansion” rate. One factor that limits the range expansion rate is vertical growth; at the biofilm edge there is a direct trade-off between horizontal and vertical growth—the more a biofilm grows up, the less it can grow out. Thus, the balance of horizontal and vertical growth impacts the range expansion rate and, crucially, the overall biofilm growth rate. However, the biophysical connection between horizontal and vertical growth remains poorly understood, due in large part to difficulty in resolving biofilm shape with sufficient spatial and temporal resolution from small length scales to macroscopic sizes. Here, we experimentally show that the horizontal expansion rate of bacterial colonies is controlled by the contact angle at the biofilm edge. Using white light interferometry, we measure the three-dimensional surface morphology of growing colonies, and find that small colonies are surprisingly well-described as spherical caps. At later times, nutrient diffusion and uptake prevent the tall colony center from growing exponentially. However, the colony edge always has a region short enough to grow exponentially; the size and shape of this region, characterized by its contact angle, along with cellular doubling time, determines the range expansion rate. We found that the geometry of the exponentially growing biofilm edge is well-described as a spherical-cap-napkin-ring, i.e., a spherical cap with a cylindrical hole in its center (where the biofilm is too tall to grow exponentially). We derive an exact expression for the spherical-cap-napkin-ring-based range expansion rate; further, to first order, the expansion rate only depends on the colony contact angle, the thickness of the exponentially growing region, and the cellular doubling time. We experimentally validate both of these expressions. In line with our theoretical predictions, we find that biofilms with long cellular doubling times and small contact angles do in fact grow faster than biofilms with short cellular doubling times and large contact angles. Accordingly, sensitivity analysis shows that biofilm growth rates are more sensitive to their contact angles than to their cellular growth rates. Thus, to understand the fitness of a growing biofilm, one must account for its shape, not just its cellular doubling time.
- Award ID(s):
- 2045035
- PAR ID:
- 10310895
- Date Published:
- Journal Name:
- Plant Ecology and Evolution
- Volume:
- 154
- Issue:
- 3
- ISSN:
- 2032-3913
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Increases in shrub growth and canopy cover are well documented community responses to climate warming in the Arctic. An important consequence of larger deciduous shrubs is shading of prostrate plant species, many of which are important sources of nectar and berries. Here, we present the impact of a shading experiment on two prostrate shrubs, Vaccinium vitis-idaea L. and Arctous alpina L., in northern Alaska over two growing seasons. We implemented three levels of shading (no shade, 40% shade, and 80% shade) in dry heath and moist acidic tundra. Plots were monitored for soil moisture content, surface temperature, normalized difference vegetation index (NDVI), and flowering. Shading was shown to, on average, lower surface temperature (0.7 °C to 5.3 °C) and increase soil moisture content (0.5% to 5.6%) in both communities. Both species- and plot-level NDVI values were delayed in timing of peak values (7 to 13 days) and decreased at the highest shading. Flower abundance of both species was lower in shaded plots and peak flowering was delayed (3 to 8 days) compared with controls. Changes in timing may result in phenological mismatches and can impact other trophic levels in the Arctic as both the flowers and resulting berries are important food sources for animals.more » « less
-
Abstract Vertebrate embryos require access to water; however, many species nest in terrestrial habitats that vary considerably in moisture content. Oviparous, non‐avian reptiles have served as models to understand how environmental factors, like moisture availability, influence development because eggs are often exposed to prevailing environments in the absence of parental care. Though much research demonstrates the importance of water absorption by eggs, many ecological factors that influence moisture availability in natural nests have received little attention. For example, the type of substrate in which nests are constructed is understudied. We experimentally incubated eggs of the brown anole lizard (
Anolis sagrei ) in 2 naturally occurring nest substrates that were treated with varying amounts of water to determine how natural substrates influence development at different moisture concentrations. One substrate consisted of sand and crushed seashells and the other was mostly organic material (i.e. decayed plant material). Both are common nesting substrates at our field site. When controlling for water uptake by eggs, we found that egg survival and hatchling phenotypes were similar between substrates; however, embryos developed more quickly in the sand/shell substrate than the organic substrate, indicating substrate‐specific effects on embryo physiology. These results demonstrate that different natural substrates can result in similar developmental outcomes if the water available to eggs is comparable; however, some aspects of development, like developmental rate, are affected by the type of substrate, independent of water availability. Further study is required to determine how natural substrates influence embryo physiology independent of water content. -
Abstract Mycelium is crucial in decomposing biomass and cycling nutrients in nature. While various environmental factors can influence mycelium growth, the role of substrate mechanics is not yet clear. In this study, we investigate the effect of substrate stiffness on mycelium growth. We prepared agar substrates of different concentrations to grow the mycelium, but kept other environmental and chemical conditions consistent. We made a time-lapse recording of the growing history with minimum interruption. We repeated our tests for different species. Our results generally support that mycelium grows faster on a stiffer substrate,
Ganoderma lucidum gives the highest growth rate andPleurotus eryngii is most sensitive to substrate stiffness. We combined experimental characterization and computational simulation to investigate the mechanism and discovered that mycelium concentrates on the surface of a rigid substrate, but penetrates the soft one. Our Monte Carlo simulations illustrate that such a penetration allows mycelium to grow in the three-dimensional space, but effectively slows down the surface occupation speed. Our study provides insights into fungal growth and reveals that the mycelium growth rate can be tuned through substrate stiffness, thus reducing the time for producing mycelium-based composites.Impact statement We used agar substrates and tuned its stiffness to culture mycelium and compared tune its stiffness to culture mycelium and compare its growth in a well-controlled condition. Our results revealed that mycelium grows faster on stiffer substrates, thus fully occupying the petri dish surface more quickly. We repeated our study several times by testing four species,
P. eryngii ,G. lucidum ,Trametes versicolor ,and Flammulina velutipes, and the stiffest substrate always gives the highest mean growing rate than others. TheG. lucidum shows the highest spreading rate that is obtained on the stiffest substrate as 39.1 ± 2.0 mm2/h. We found that the mycelium on a soft substrate will grow into the substrate instead of spreading on the stiffer surface. Our Monte Carlo simulations further show that once the fibers grow into a three-dimensional substrate, its growth is slower than growing on a two-dimensional surface, providing a microscopic mechanism of the substrate stiffness effect. This study’s analysis of how substrate stiffness impacts mycelium growth is new, bridging a critical knowledge gap in understanding the relationship between substrate mechanics and fungal ecology. The knowledge from this study has a potential in accelerating sustainable manufacturing of mycelium-based composite by adjusting substrate mechanics.Graphical Abstract -
ABSTRACT Escape responses are vital for the survival of prey. The high speeds and accelerations needed to evade predators successfully require exerting forces on the environment. Unlike water, terrestrial habitats can vary in ways that constrain the forces applied, requiring animals to adjust their behavior in response to variable conditions. We evaluated the terrestrial jumping of an amphibious fish, the blackspotted rockskipper (
Entomacrodus striatus ), to determine if substrate roughness and wetness influence jumping performance. We predicted that rockskippers would produce a greater force output as substrate roughness increased and wetness decreased. Using a novel waterproof force plate capable of detecting millinewton loads, we collected ground reaction forces from rockskippers jumping on wet and dry sandpapers of varying grits. We also used micro‐CT scans to quantify muscle mass as a relative fraction of body mass to determine if these jumps could be performed without power amplification. Mixed‐model analysis of jumps revealed significantly higher maximum horizontal forces, jump duration, and maximum power on dry versus wet substrates, but no effect of substrate roughness. However, the final jump outcomes (takeoff speed and angle) were unaffected. Peak jump power was within the range of typical fish muscle. Thus, these fish display a jumping behavior which is robust to substrate property variation.