An official website of the United States government
The locomotion of soft snake robots is dependent on frictional interactions with the environment. Frictional anisotropy is a morphological characteristic of snakeskin that allows snakes to engage selectively with surfaces and generate propulsive forces. The prototypical slithering gait of most snakes is lateral undulation, which requires a significant lateral resistance that is lacking in artificial skins of existing soft snake robots. We designed a set of kirigami lattices with curvilinearly-arranged cuts to take advantage of in-plane rotations of the 3D structures when wrapped around a soft bending actuator. By changing the initial orientation of the scales, the kirigami skin produces high lateral friction upon engagement with surface asperities, with lateral to cranial anisotropic friction ratios above 4. The proposed design increased the overall velocity of the soft snake robot more than fivefold compared to robots without skin.
more »
« less
Friction modulation in limbless, three-dimensional gaits and heterogeneous terrains
Abstract Motivated by a possible convergence of terrestrial limbless locomotion strategies ultimately determined by interfacial effects, we show how both 3D gait alterations and locomotory adaptations to heterogeneous terrains can be understood through the lens of local friction modulation. Via an effective-friction modeling approach, compounded by 3D simulations, the emergence and disappearance of a range of locomotory behaviors observed in nature is systematically explained in relation to inhabited environments. Our approach also simplifies the treatment of terrain heterogeneity, whereby even solid obstacles may be seen as high friction regions, which we confirm against experiments of snakes ‘diffracting’ while traversing rows of posts, similar to optical waves. We further this optic analogy by illustrating snake refraction, reflection and lens focusing. We use these insights to engineer surface friction patterns and demonstrate passive snake navigation in complex topographies. Overall, our study outlines a unified view that connects active and passive 3D mechanics with heterogeneous interfacial effects to explain a broad set of biological observations, and potentially inspire engineering design.
more »
« less
- PAR ID:
- 10313226
- Date Published:
- Journal Name:
- Nature Communications
- Volume:
- 12
- Issue:
- 1
- ISSN:
- 2041-1723
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Limbless animals like snakes inhabit most terrestrial environments, generating thrust to overcome drag on the elongate body via contacts with heterogeneities. The complex body postures of some snakes and the unknown physics of most terrestrial materials frustrates understanding of strategies for effective locomotion. As a result, little is known about how limbless animals contend with unplanned obstacle contacts. We studied a desert snake, Chionactis occipitalis , which uses a stereotyped head-to-tail traveling wave to move quickly on homogeneous sand. In laboratory experiments, we challenged snakes to move across a uniform substrate and through a regular array of force-sensitive posts. The snakes were reoriented by the array in a manner reminiscent of the matter-wave diffraction of subatomic particles. Force patterns indicated the animals did not change their self-deformation pattern to avoid or grab the posts. A model using open-loop control incorporating previously described snake muscle activation patterns and body-buckling dynamics reproduced the observed patterns, suggesting a similar control strategy may be used by the animals. Our results reveal how passive dynamics can benefit limbless locomotors by allowing robust transit in heterogeneous environments with minimal sensing.more » « less
-
We optimize three-dimensional snake kinematics for locomotor efficiency. We assume a general space-curve representation of the snake backbone with small-to-moderate lifting off the ground and negligible body inertia. The cost of locomotion includes work against friction and internal viscous dissipation. When restricted to planar kinematics, our population-based optimization method finds the same types of optima as a previous Newton-based method. With lifting, a few types of optimal motions prevail. We have an s-shaped body with alternating lifting of the middle and ends at small-to-moderate transverse friction. With large transverse friction, curling and sliding motions are typical at small viscous dissipation, replaced by large-amplitude bending at large viscous dissipation. With small viscous dissipation, we find local optima that resemble sidewinding motions across friction coefficient space. They are always suboptimal to alternating lifting motions, with average input power 10–100% higher.more » « less
-
null (Ed.)Additive friction stir deposition is an emerging solid-state additive manufacturing technology that enables site-specific build-up of high-quality metals with fine, equiaxed microstructures and excellent mechanical properties. By incorporating proper machining, it has the potential to produce large-scale, complex 3D geometries. Still early in its development, a thorough understanding of the thermal process fundamentals, including temperature evolution and heat generation mechanisms, has not been established. Here, we aim to bridge this gap through in situmonitoring of the thermal field and material flow behavior using complementary infrared imaging, thermocouple measurement, and optical imaging. Two materials challenging to print via beam-based additive technologies, Cu and Al-Mg-Si, are investigated. During additive friction stir deposition of both materials, we find similar trends of thermal features (e.g., the trends of peak temperature , exposure time, and cooling rate) with respect to the processing conditions (e.g., the tool rotation rate and in-plane velocity ). However, there is a salient, quantitative difference between Cu and Al-Mg-Si; exhibits a power law relationship with / in Cu but with / in Al-Mg-Si. We correlate this difference to the distinct interfacial contact states that are observed through in situ material flow characterization. In Cu, the interfacial contact between the material and tool head is characterized by a full slipping condition, so interfacial friction is the dominant heat generation mechanism. In Al-Mg-Si, the interfacial contact is characterized by a partial slipping/sticking condition, so both interfacial friction and plastic energy dissipation contribute significantly to the heat generation.more » « less
-
The passive compliance of a soft worm-like body can be a key advantage for traversal of complex confined spaces, but in practice, the body’s stiffness and contact friction often require experimental adjustments. Here, for the first time, we develop a dynamic, 3D simulation that enables systematic testing of robot parameters (e.g. stiffness and friction) in different radius of curvature environments, which will help us better understand design trade-offs in creating soft robots that mimic worm-like locomotion. Specifically, we use the open-source physics engine MuJoCo because it is established for both biomechanical and robotic modeling, as well as multi-point contact dynamics, which are present in confined spaces. The model has sensory capabilities analogous to the stretch and tactile proprioception of an earthworm and is amenable to both feedforward and feedback control. After validating our model by comparing to our previous physical robot, we quantify locomotion performance over a range of friction coefficients, structural stiffnesses, and turning radii. We found that speed increased with friction coefficient on flat ground for higher stiffness models, but decreased with friction coefficient for lower stiffness models, both on flat ground and in pipe bends. For turning radii greater than 0.45 m, speed and stiffness also had a positive correlation, however, below the critical turning radius of 0.45 m, increasing stiffness had no appreciable influence on speed. This simulation can potentially be used to optimize designs for particular environments, to better understand the influence of passive vs. active control on individual and coupled segments, and perhaps offer a deeper understanding of how animals and robots can employ soft structures. For example, we can posit from our results that changing stiffness will not increase speed below the critical turning radius, meaning further experiments should focus on other parameters or actively controlled turning to improve speed through tighter turns.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1038/s41467-021-26276-x
