More Like this

1. Effect of Keying Flaps on a Multiline Ring Anchor in Soft Clay

   Lee, J ; Aubeny, C. ( May 2021 , International Foundations Congress and Equipment Expo 2021)

   The multiline ring anchor (MRA) was devised as a cost-effective means for securing floating offshore wind turbines (FOWTs) to the seabed. FOWTs occurring in arrays create the possibility for attaching mooring lines from multiple units to a single anchor. Additionally, the deep embedment of the MRA into relatively strong soil permits high load capacity to be achievable with a small and lighter anchor, thereby reducing anchor material, transport, and installation costs. However, since the MRA is shorter than a conventional caisson, features such as wing plates and keying flaps are needed to achieve parity in load capacity with a caisson having a comparable diameter. Preliminary studies show that attaching wing plates to MRA in soft clay is highly effective in enhancing its horizontal load capacity, but only marginally effective in improving vertical load capacity. This motivated the current study investigating the use of keying flaps to further enhance vertical load capacity. Two-dimensional finite element analyses were conducted to understand how keying flaps impact the failure mechanism of the stiffeners and provide reliable evaluations of the uplift resistance of the MRA. The results show that the thickness of the stiffener, flap length, and flap angle can affect the failure mechanism and bearing factors. For the optimal design of the stiffener, a comparative study was carried out to compare the effects of keying flaps and thickness of the stiffener. The studies show that introducing keying flaps can have comparable load capacity with thicker stiffeners and that it can be an economical solution for achieving high vertical load capacity while containing material and fabrication costs. 

   more » « less
2. Lateral undrained capacity of a multiline ring anchor in clay

   Lee, J. ; Aubeny, C. ( February 2021 , International journal of geomechanics)

   Offshore wind energy is an attractive alternative in pursuing the nation’s clean energy goals due to the significant demand for electricity in the coastal areas of the United States. Locating sites further offshore in deeper water can provide stronger, more consistent wind power resources and can mitigate aesthetic concerns. This motivates a need for improvements in the floating offshore wind turbine (FOWT) technology. As foundation costs comprise a significant fraction of the total cost for offshore wind power development, reducing the cost of the mooring system can play a significant role in making floating offshore wind economically competitive. Previous studies led to the development of a novel, efficient multiline ring anchor (MRA) system that can provide significant capital cost savings. Preliminary research shows that the MRA has a clear advantage under lateral loading by attaching wing plates to the cylindrical core of the anchor. In this study, two-dimensional finite-element (2D FE) analyses were performed to understand how wing plates affect the MRA performance under horizontal loading and provide reliable estimates of the ultimate load capacity. The results show the collapse mechanisms and bearing factors can be affected by width, the total number of wing plates, and load angles. This study also presents plastic limit analysis (PLA), based on the upper bound solution, to validate the 2D FE results by comparison and to confirm whether the postulated collapse mechanism was correct. The results obtained in the current study indicated that PLA can be a benchmark solution to evaluate the ultimate load capacity of the MRA with a satisfactory agreement with the FE-computed values. 

   more » « less
3. Installability of a Multiline Ring Anchor System in a Seabed under Severe Environmental Conditions

   Lee, J. ; Hong, J. ; Aubeny, C. ; Arwade, S. ; DeGroot, D. ; Beemer, R. ; Balakrishnan, K. ; Nam, Y. ( January 2021 , IEEE Oceans 2021)

   The trend of offshore wind energy in deeper water that is expected to shift from fixed to floating platforms requires a cost-effective anchor solution for floating offshore wind turbines (FOWTs). Multiline ring anchor (MRA) has been developed as a cost-effective solution for FOWTs due to its capability of anchoring multiple mooring lines, its high efficiency, and its availability to a wide range of soils and loading conditions. While previous preliminary studies on the anchor performance provide useful insights on how the potential advantages of the MRA can improve load capacity, these studies are limited to focusing on optimizing the anchor design in certain soil and loading conditions. By contrast, the MRA will be installed in seabeds under more complex conditions that depend on geological location, water depth of at-place, and environmental conditions, of which wind, current, and wave are major components. These may result in additional substantial extra capital costs, delays in the projects, and safety issues, when the complex conditions are not properly considered. Specifically, the installation time and expenses of the offshore anchor are very susceptible to anchor types, installation methods, and environmental conditions. For this reason, this paper compares two existing offshore anchor installation methods and different anchor types on the basis of their performance under the same severe environmental condition. In evaluating the installability of the MRA, this paper conducts a comparative scenario study. The results show that the anchor installations and anchor handling vessel (AHV) operations are sensitive to weather conditions and AHV sizes. In view of total weather standby, the results show that anchor types or installation methods have little effect on it due to their relatively shorter duration than other work sequences. However, the MRA can benefit in substantially reducing transport time and costs due to its compact size. The MRA can be more efficient and cost-effective than other alternatives under complex and severe weather conditions. 

   more » « less
4. Installability of a Multiline Ring Anchor System in a Seabed under Severe Environmental Conditions

   https://doi.org/10.23919/OCEANS44145.2021.9705679  

   Lee, Junho ; Hong, Jinwuk ; Aubeny, Charles P. ; Arwade, Sanjay ; Degroot, Don ; Martinez, Alejandro ; Beemer, Ryan ; Balakrishnan, Krishnaveni ; Nam, Yoonsoo ( September 2021 , OCEANS 2021)

   The trend of offshore wind energy in deeper water that is expected to shift from fixed to floating platforms requires a cost-effective anchor solution for floating offshore wind turbines (FOWTs). Multiline ring anchor (MRA) has been developed as a cost-effective solution for FOWTs due to its capability of anchoring multiple mooring lines, its high efficiency, and its availability to a wide range of soils and loading conditions. While previous preliminary studies on the anchor performance provide useful insights on how the potential advantages of the MRA can improve load capacity, these studies are limited to focusing on optimizing the anchor design in certain soil and loading conditions. By contrast, the MRA will be installed in seabeds under more complex conditions that depend on geological location, water depth of at-place, and environmental conditions, of which wind, current, and wave are major components. These may result in additional substantial extra capital costs, delays in the projects, and safety issues, when the complex conditions are not properly considered. Specifically, the installation time and expenses of the offshore anchor are very susceptible to anchor types, installation methods, and environmental conditions. For this reason, this paper compares two existing offshore anchor installation methods and different anchor types on the basis of their performance under the same severe environmental condition. In evaluating the installability of the MRA, this paper conducts a comparative scenario study. The results show that the anchor installations and anchor handling vessel (AHV) operations 

   more » « less
5. Uplift Resistance of a Multiline Ring Anchor System in Soft Clay to Extreme Conditions

   https://doi.org/10.1061/9780784483688.041  

   Lee, J. ; Balakrishnan, K. ; Aubeny, C. ; Arwade, S. ; DeGroot, D. ; Martinez, A. ; and Beemer, R. ( January 2021 , Geo-Extreme 2021)

   A multiline ring anchor (MRA) system has been developed as a cost-effective alternative for securing arrays of floating offshore wind turbines (FOWTs) to the seabed. Multiline attachments can improve the economically competitiveness of FOWTs by reducing the capital cost of the support system for the floating structures. FOWTs can be subjected to severe wind and wave conditions resulting in extreme loads to the anchor system. Thus, the reliable design of the anchor system requires proper determination of the extreme mooring line loads acting on the anchor needed to secure FOWTs to the seabed. Previous studies showed the MRA in soft clay has clear advantages over existing anchors under the extreme horizontal loading conditions imposed by catenary moorings; however, its performance relative to conventional anchors under extreme vertical loading imposed by taut mooring systems requires further investigation. This study presents predictions of extreme loads on floating structures secured by taut mooring systems and evaluates the potential for developing an economical anchor for resisting these extreme loads. 

   more » « less