Structural color filters have recently blossomed as a superior alternative to organic dyes or chemical pigments owing to their remarkable durability and compactness. With appropriate design, nanostructure‐induced photonic or plasmonic resonance modes can give rise to either enhancement in transmission or suppression in the reflection within specific wavelength ranges in the optical regime, generating distinctive colors. However, the static optical properties due to fixed structural geometry and size after fabrication hinder their deployment in many cutting‐edge technologies requiring adaptive complexion changes. Here, a multilayer thin film‐based color filter incorporating Mg and MgO, earth‐abundant and biodegradable materials, is devised. The devices display vivid hues spanning a broad gamut via the control of the film thickness. They also exhibit minimal color changes with varying angle views up to 40°–50°. Moreover, the tones fade away instantly upon immersion in water and then progressively transition to a different hue with the complete removal of the Mg‐containing layers, realizing transient color responses. This approach holds great promise for alternative pixels with irreversible color‐change capability as well as zero‐power consumption and low cost, while making use of biodegradable materials.
Photonic crystals are extensively explored to replace inorganic pigments and organic dyes as coloring elements in printing, painting, sensing, and anti‐counterfeiting due to their brilliant structural colors, chemical stability, and environmental friendliness. However, most existing photonic‐crystal‐based pigments can only display monochromatic colors once made, and generating multicolors has to start with designing different building blocks. Here, a novel photonic pigment featuring highly tunable structural colors in the entire visible spectrum, made by the magnetic assembly of monodisperse nanorods into body‐centered‐tetragonal photonic crystals, is reported. Their prominent magnetic and crystal anisotropy makes it efficient to generate multicolors using one photonic pigment by magnetically controlling the crystal orientation. Further, the combination of angle‐dependent diffraction and magnetic orientation control enables the design of rotation‐asymmetric photonic films that display distinct patterns and encrypted information in response to rotation. The efficient multicolor generation through precise orientational control makes this novel photonic pigment promising in developing high‐performance structural‐colored materials and optical devices.
more » « less- NSF-PAR ID:
- 10446287
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials
- Volume:
- 34
- Issue:
- 4
- ISSN:
- 0935-9648
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
Birds are among the most colorful animals on Earth. The different patterns and colors displayed on their feathers help them to identify their own species, attract mates or hide from predators. The bright plumages of birds are achieved through either pigments (such as reds and yellows) or structures (such as blues, greens or ultraviolet) inside feathers, or through a combination of both pigments and structures. Variation in the diversity of color patterns over time can give a helpful insight into the rate of evolution of a species. For example, structural colors evolve more quickly than pigment-based ones and can therefore be a key feature involved in species recognition or mate attraction. Studying the evolution of plumage patterns has been challenging due to differences in the vision of humans and birds. However, recent advances in technology have enabled researchers to map the exact wavelengths of the colors that make up the patterns, allowing for rigorous comparison of plumage color patterns across different individuals and species. To gain a greater understanding of how plumage color patterns evolve in birds, Eliason et al. studied kingfishers, a group of birds known for their complex and variable color patterns, and their worldwide distribution. The experiments analyzed the plumage color patterns of 72 kingfisher species (142 individual museum specimens) from both mainland and island populations by quantifying the amount of different wavelengths of light reflecting from a feather and accounting for relationships among species and among feather patches. The analyzes showed that having more complex patterns leads to a greater accumulation of plumage colors over time, supporting the idea that complex plumages provide more traits for natural or sexual selection to act upon. Moreover, in upper parts of the bodies, such as the back, the plumage varied more across the different species and evolved faster than in ventral parts, such as the belly or throat. This indicates that sexual selection may be the evolutionary force driving variation in more visible areas, such as the back, while patterns in the ventral part of the body are more important for kin recognition. Eliason et al. further found no differences in plumage complexity between kingfishers located in island or mainland habitats, suggesting that the isolation of the island and the different selection pressures this may bring does not impact the complexity of color patterns. However, kingfisher species located on islands did display higher rates of color evolution. This indicates that, regardless of the complexity of the plumage, island-specific pressures are driving rapid color diversification. Using a new multivariate approach, Eliason et al. have unearthed a pattern in plumage complexity that may otherwise have been missed and, for the first time, have linked differences in color pattern on individual birds with evolutionary differences across species. In doing so, they have provided a framework for future studies of color evolution. The next steps in this research would be to better understand why the island species are evolving more rapidly even though they do not have more complex plumage patterns and how the observed color differences relate to rapid rates of speciation.more » « less
-
more » « less
Abstract Supramolecular and macromolecular functional helical superstructures are ubiquitous in nature and display an impressive catalog of intriguing and elegant properties and performances. In materials science, self‐organized soft helical superstructures, i.e., cholesteric liquid crystals (CLCs), serve as model systems toward the understanding of morphology‐ and orientation‐dependent properties of supramolecular dynamic helical architectures and their potential for technological applications. Moreover, most of the fascinating device applications of CLCs are primarily determined by different orientations of the helical axis. Here, the control of the helical axis orientation of CLCs and its dynamic switching in two and three dimensions using different external stimuli are summarized. Electric‐field‐, magnetic‐field‐, and light‐irradiation‐driven orientation control and reorientation of the helical axis of CLCs are described and highlighted. Different techniques and strategies developed to achieve a uniform lying helix structure are explored. Helical axis control in recently developed heliconical cholesteric systems is examined. The control of the helical axis orientation in spherical geometries such as microdroplets and microshells fabricated from these enticing photonic fluids is also explored. Future challenges and opportunities in this exciting area involving anisotropic chiral liquids are then discussed.
-
Icosahedral colloidal clusters are a new class of spherical colloidal crystals. This cluster allows for potentially superior optical properties in comparison to conventional onion-like colloidal supraballs because of the quasi-crystal structure. However, the characterization of the cluster as an optical material has until now not been achieved. Here we successfully produce icosahedral clusters by assembling silica particles using bulk water-in-oil emulsion droplets and systematically characterize their optical properties. We exploit a water-saturated oil phase to control droplet drying, thereby preparing clusters at room temperature. In comparison to conventional onion-like supraballs with a similar size, the icosahedral clusters exhibit relatively strong structural colors with weak nonresonant scattering. Simulations prove that the crystalline array inside the icosahedral cluster strengthens the collective specular diffraction. To further improve color saturation, the silica particles constituting the cluster are coated with a thin-film carbon shell. The carbon shell acts as a broad-band absorber and reduces incoherent scattering with long optical paths, resulting in vibrant blue, green, and red colors comparable to inorganic chemical pigments.more » « less
-
more » « less
Abstract Photonic crystals (PCs) constructed from colloidal building blocks have attracted increasing attention because their brilliant structural colors may find broad applications in paints, sensors, displays, and security devices. However, producing high‐quality structural colors on flexible substrates such as textiles in an efficient and scalable manner remains a challenge. Here a robust and ultrafast approach to produce industrial‐scale colloidal PCs by the shear‐induced assembly of liquid colloidal crystals of polystyrene beads pre‐formed spontaneously over a critical volume fraction is demonstrated. The pre‐crystallization of colloidal crystals allows their efficient assembly into large‐scale PCs on flexible fabric substrates under shear force. Further, by programming the wettability of the fabric substrate with hydrophilic–hydrophobic regions, this shear‐based assembly strategy can conveniently generate pre‐designed patterns of complex structural colors. This assembly strategy brings structural coloration to flexible fabrics at a scale suitable for commercial applications; therefore, it holds the potential to revolutionize the coloration technology in the textile industry.
