skip to main content


Title: Acoustophoretic Liquefaction for 3D Printing Ultrahigh‐Viscosity Nanoparticle Suspensions
Abstract

An acoustic liquefaction approach to enhance the flow of yield stress fluids during Digital Light Processing (DLP)‐based 3D printing is reported. This enhanced flow enables processing of ultrahigh‐viscosity resins (μapp > 3700 Pa s at shear rates  = 0.01 s–1) based on silica particles in a silicone photopolymer. Numerical simulations of the acousto–mechanical coupling in the DLP resin feed system at different agitation frequencies predict local resin flow velocities exceeding 100 mm s–1at acoustic transduction frequencies of 110 s–1. Under these conditions, highly loaded particle suspensions (weight fractions, ϕ = 0.23) can be printed successfully in complex geometries. Such mechanically reinforced composites possess a tensile toughness 2000% greater than the neat photopolymer. Beyond an increase in processible viscosities, acoustophoretic liquefaction DLP (AL‐DLP) creates a transient reduction in apparent viscosity that promotes resin recirculation and decreases viscous adhesion. As a result, acoustophoretic liquefaction Digital Light Processing (AL‐DLP) improves the printed feature resolution by more than 25%, increases printable object sizes by over 50 times, and can build parts >3 × faster when compared to conventional methodologies.

 
more » « less
Award ID(s):
1719875
NSF-PAR ID:
10362885
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Materials
Volume:
34
Issue:
7
ISSN:
0935-9648
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    The availability of engineering polymers for vat photopolymerization (VP) additive manufacturing is limited. This limitation primarily stems from the inability of standard VP systems to recoat high-viscosity resins (> 3 Pa s). High-temperature vat photopolymerization is a new process-based VP platform that enables processing of viscous photopolymer resins (viscosity > 3 Pa s). Research in this area has been focused on demonstrating expanded access to new polymer families, and studying the effect of printing temperature on mechanical and esthetic performance of printed parts. However, methods to determine the printing temperature that prevents the occurrence of thermally induced polymerization (i.e., thermal stability) in the resin have not been established. In this work, the authors have applied characterization techniques such as thermogravimetric analysis, Rheology and differential scanning calorimetry to determine the printing temperature for processing viscous photopolymer resins. As a case study, the developed characterization techniques are applied to: (1) photopolymer that is solid at room temperature, (2) polymer with viscosity of 21 Pa s at room temperature, and the temperature at which the resins can be printed without triggering thermally induced polymerization is successfully determined. The results of this work will act as a materials’ characterization and process parameter development guide for high-temperature VP systems, thus enabling expansion of VP materials catalogue to engineering materials that were previously unprocessable.

     
    more » « less
  2. Abstract

    Design and direct fabrication of high‐performance thermosets and composites via 3D printing are highly desirable in engineering applications. Most 3D printed thermosetting polymers to date suffer from poor mechanical properties and low printing speed. Here, a novel ink for high‐speed 3D printing of high‐performance epoxy thermosets via a two‐stage curing approach is presented. The ink containing photocurable resin and thermally curable epoxy resin is used for the digital light processing (DLP) 3D printing. After printing, the part is thermally cured at elevated temperature to yield an interpenetrating polymer network epoxy composite, whose mechanical properties are comparable to engineering epoxy. The printing speed is accelerated by the continuous liquid interface production assisted DLP 3D printing method, achieving a printing speed as high as 216 mm h−1. It is also demonstrated that 3D printing structural electronics can be achieved by combining the 3D printed epoxy composites with infilled silver ink in the hollow channels. The new 3D printing method via two‐stage curing combines the attributes of outstanding printing speed, high resolution, low volume shrinkage, and excellent mechanical properties, and provides a new avenue to fabricate 3D thermosetting composites with excellent mechanical properties and high efficiency toward high‐performance and functional applications.

     
    more » « less
  3. Abstract

    Multimaterial additive manufacturing has important applications in various emerging fields. However, it is very challenging due to material and printing technology limitations. Here, we present a resin design strategy that can be used for single-vat single-cure grayscale digital light processing (g-DLP) 3D printing where light intensity can locally control the conversion of monomers to form from a highly stretchable soft organogel to a stiff thermoset within in a single layer of printing. The high modulus contrast and high stretchability can be realized simultaneously in a monolithic structure at a high printing speed (z-direction height 1 mm/min). We further demonstrate that the capability can enable previously unachievable or hard-to-achieve 3D printed structures for biomimetic designs, inflatable soft robots and actuators, and soft stretchable electronics. This resin design strategy thus provides a material solution in multimaterial additive manufacture for a variety of emerging applications.

     
    more » « less
  4. Abstract

    Digital Light Processing (DLP) 3D printing enables the creation of hierarchical complex structures with specific micro‐ and macroscopic architectures that are impossible to achieve through traditional manufacturing methods. Here, this hierarchy is extended to the mesoscopic length scale for optimized devices that dissipate mechanical energy. A photocurable, thus DLP‐printable main‐chain liquid crystal elastomer (LCE) resin is reported and used to print a variety of complex, high‐resolution energy‐dissipative devices. Using compressive mechanical testing, the stress–strain responses of 3D‐printed LCE lattice structures are shown to have 12 times greater rate‐dependence and up to 27 times greater strain–energy dissipation compared to those printed from a commercially available photocurable elastomer resin. The reported behaviors of these structures provide further insight into the much‐overlooked energy‐dissipation properties of LCEs and can inspire the development of high‐energy‐absorbing device applications.

     
    more » « less
  5. Abstract Thrombosis in the circulation system can lead to major myocardial infarction and cardiovascular deaths. Understanding thrombosis formation is necessary for developing safe and effective treatments. In this work, using digital light processing (DLP)-based 3D printing, we fabricated sophisticated in vitro models of blood vessels with internal microchannels that can be used for thrombosis studies. In this regard, photoacoustic microscopy (PAM) offers a unique advantage for label-free visualization of the 3D-printed vessel models, with large penetration depth and functional sensitivity. We compared the imaging performances of two PAM implementations: optical-resolution PAM and acoustic-resolution PAM, and investigated 3D-printed vessel structures with different patterns of microchannels. Our results show that PAM can provide clear microchannel structures at depths up to 3.6 mm. We further quantified the blood oxygenation in the 3D-printed vascular models, showing that thrombi had lower oxygenation than the normal blood. We expect that PAM can find broad applications in 3D printing and bioprinting for in vitro studies of various vascular and other diseases. 
    more » « less