skip to main content


Title: Fitting Jet Noise Similarity Spectra to Volcano Infrasound Data
Abstract

Infrasound (low‐frequency acoustic waves) has proven useful to detect and characterize subaerial volcanic activity, but understanding the infrasonic source during sustained eruptions is still an area of active research. Preliminary comparison between acoustic eruption spectra and the jet noise similarity spectra suggests that volcanoes can produce an infrasonic form of jet noise from turbulence. The jet noise similarity spectra, empirically derived from audible laboratory jets, consist of two noise sources: large‐scale turbulence (LST) and fine‐scale turbulence (FST). We fit the similarity spectra quantitatively to eruptions of Mount St. Helens in 2005, Tungurahua in 2006, and Kīlauea in 2018 using nonlinear least squares fitting. By fitting over a wide infrasonic frequency band (0.05–10 Hz) and restricting the peak frequency above 0.15 Hz, we observe a better fit during times of eruption versus non‐eruptive background noise. Fitting smaller overlapping frequency bands highlights changes in the fit of LST and FST spectra, which aligns with observed changes in eruption dynamics. Our results indicate that future quantitative spectral fitting of eruption data will help identify changes in eruption source parameters such as velocity, jet diameter, and ash content which are critical for effective hazard monitoring and response.

 
more » « less
Award ID(s):
1847736 1901614
NSF-PAR ID:
10448124
Author(s) / Creator(s):
 ;  ;  ;  ;  
Publisher / Repository:
DOI PREFIX: 10.1029
Date Published:
Journal Name:
Earth and Space Science
Volume:
8
Issue:
11
ISSN:
2333-5084
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Real-time monitoring is crucial to assess hazards and mitigate risks of sustained volcanic eruptions that last hours to months or more. Sustained eruptions have been shown to produce a low frequency (infrasonic) form of jet noise. We analyze the lava fountaining at fissure 8 during the 2018 Lower East Rift Zone eruption of Kīlauea volcano, Hawaii, and connect changes in fountain properties with recorded infrasound signals from an array about 500 m from the fountain using jet noise scaling laws and visual imagery. Video footage from the eruption reveals a change in lava fountain dynamics from a tall, distinct fountain at the beginning of June to a low fountain with a turbulent, out-pouring lava pond surrounded by a tephra cone by mid-June. During mid-June, the sound pressure level reaches a maximum, and peak frequency drops. We develop a model that uses jet noise scaling relationships to estimate changes in volcanic jet diameter and jet velocity from infrasound sound pressure levels and peak frequencies. The results of this model indicate a decrease in velocity in mid-June which coincides with the decrease in fountain height. Furthermore, the model results suggest an increase in jet diameter, which can be explained by the larger width of the fountain that resembles a turbulent lava pond compared to the distinct fountain at the beginning of June. The agreement between the infrasound-derived and visually observed changes in fountain dynamics suggests that jet noise scaling relationships can be used to monitor lava fountain dynamics using infrasound recordings. 
    more » « less
  2. Abstract A new episode of unrest and phreatic/phreatomagmatic/magmatic eruptions occurred at Ambae volcano, Vanuatu, in 2017–2018. We installed a multi-station seismo-acoustic network consisting of seven 3-component broadband seismic stations and four 3-element (26–62 m maximum inter-element separation) infrasound arrays during the last phase of the 2018 eruption episode, capturing at least six reported major explosions towards the end of the eruption episode. The observed volcanic seismic signals are generally in the passband 0.5–10 Hz during the eruptive activity, but the corresponding acoustic signals have relatively low frequencies (< 1 Hz). Apparent very-long-period (< 0.2 Hz) seismic signals are also observed during the eruptive episode, but we show that they are generated as ground-coupled airwaves and propagate with atmospheric acoustic velocity. We observe strongly coherent infrasound waves at all acoustic arrays during the eruptions. Using waveform similarity of the acoustic signals, we detect previously unreported volcanic explosions at the summit vent region based on constant-celerity reverse-time-migration (RTM) analysis. The detected acoustic bursts are temporally related to shallow seismic volcanic tremor (frequency content of 5–10 Hz), which we characterise using a simplified amplitude ratio method at a seismic station pair with different distances from the vent. The amplitude ratio increased at the onset of large explosions and then decreased, which is interpreted as the seismic source ascent and descent. The ratio change is potentially useful to recognise volcanic unrest using only two seismic stations quickly. This study reiterates the value of joint seismo-acoustic data for improving interpretation of volcanic activity and reducing ambiguity in geophysical monitoring. 
    more » « less
  3. Abstract

    Volcanic eruption source parameters may be estimated from acoustic pressure recordings dominant at infrasonic frequencies (< 20 Hz), yet uncertainties may be high due in part to poorly understood propagation dynamics. Linear acoustic propagation of volcano infrasound is commonly assumed, but nonlinear processes such as wave steepening may distort waveforms and obscure the sourcing process in recorded waveforms. Here we use a previously developed frequency-domain nonlinearity indicator to quantify spectral changes due to nonlinear propagation primarily in 80 signals from explosions at Yasur Volcano, Vanuatu. We find evidence for$$\le$$10−3 dB/m spectral energy transfer in the band 3–9 Hz for signals with amplitude on the order of several hundred Pa at 200–400 m range. The clarity of the nonlinear spectral signature increases with waveform amplitude, suggesting stronger nonlinear changes for greater source pressures. We observe similar results in application to synthetics generated through finite-difference wavefield simulations of nonlinear propagation, although limitations of the model complicate direct comparison to the observations. Our results provide quantitative evidence for nonlinear propagation that confirms previous interpretations made on the basis of qualitative observations of asymmetric waveforms.

     
    more » « less
  4. Abstract

    Infrasound (low frequency sound waves) can be used to monitor and characterize volcanic eruptions. However, infrasound sensors are usually placed on the ground, thus providing a limited sampling of the acoustic radiation pattern that can bias source size estimates. We present observations of explosive eruptions from a novel uncrewed aircraft system (UAS)‐based infrasound sensor platform that was strategically hovered near the active vents of Stromboli volcano, Italy. We captured eruption infrasound from short‐duration explosions and jetting events. While potential vertical directionality was inconclusive for the short‐duration explosion, we find that jetting events exhibit vertical sound directionality that was observed with a UAS close to vertical. This directionality would not have been observed using only traditional deployments of ground‐based infrasound sensors, but is consistent with jet noise theory. This proof‐of‐concept study provides unique information that can improve our ability to characterize and quantify the directionality of volcanic eruptions and their associated hazards.

     
    more » « less
  5. Abstract

    Seismic waves are commonly used to monitor unrest before, during, and after volcanic eruptions. The source of seismic tremor during a sustained explosive volcanic eruption is not well understood. Recent observations of the 2016 eruption of Pavlof Volcano, Alaska, revealed a change in the relationship (hysteresis) between ash plume height and seismic amplitude over time. Based on similarities in physical processes and observed seismic tremor in rivers, we explore two key sources of seismic energy in the volcanic conduit: (1) forces exerted by particle impacts and (2) dynamic pressure changes by the turbulent flow. We develop a physical model calculating the seismic power spectral density (PSD), where forces on the conduit wall are convolved with the Green's function for Rayleigh waves. Using reasonable eruption parameters, the model is able to reproduce the frequency spectrum from the Pavlof eruption, although the modeled amplitudes are generally lower. We test the relative importance of different eruption parameters, including grain size, velocity, and conduit dimensions. We find that turbulence generally dominates over particle impacts. However, to reach the PSD amplitude during the Pavlof eruption, large grain sizes are required, as they have the greatest relative influence on the modeled amplitude. The hysteresis between plume height and seismic amplitude can then potentially be explained by grain size changes. The PSD shape is mostly determined by the Rayleigh‐wave quality factor Q, and substantial variations in seismic amplitude can be modeled assuming a constant mass eruption rate.

     
    more » « less