Nature is the prime source of inspiration for humans to understand life and create something new. Many of today's technologies have been inspired from our surroundings, for example, invention of flight (birds), submarine (whales), Shinkansen bullet train (kingfisher), sonar (dolphin and bats) and many more. The scientific community has not been untouched by this inventiveness that has led to many novel research branches, for example biomimicry, synthetic cell research, and in vitro protein synthesis as the frontiers in the field of synthetic biology [1][2][3][4][5][6].
A natural cell was thought to have a simple construction, which later turned out to be a highly complex unit of life hosting many reactions with spatiotemporal precision [7]. Cell membrane is the first boundary that draws the physical existence of the cell. It serves as a barrier where internal materials (DNA, proteins, organelles) are separated and protected from the outside environment. It also acts as a gatekeeper that allows unassisted passage of substances like water, gases but not large molecules. This semi-permeable nature of cell membrane is regulated by diffusion or with the aid of special transporters across cell membrane such as ion channels and transporters. Cell membrane plays a vital role in almost all the cellular processes such as endocytosis, exocytosis, membrane fusion, inter and intra-cellular communications, and fertilization.
Researchers have been trying to mimic cellular functions to enhance their understanding about vital biological processes. To achieve this, bilayer membranes made with synthetic amphiphilic phospholipids are used. Many platforms are available where lipid bilayers are created including standing bilayer membrane, supported bilayer, unilamellar lipid vesicles (see next section). Standing bilayer is utilized for study of ion channels and membrane proteins [8] while supported bilayer is utilized for membrane fusion [9] and protein expression [10,11]. Micron-sized unilamellar vesicles are used as a synthetic cell model for studying biochemical reactions in vitro [7,12]. We will highlight some of the extensively studied membrane proteins and recent research updates.
Significant efforts have been made in recapitulating different aspects of membranemembrane interaction like vesicle-vesicle fusion. We will highlight the conditions required to achieve membrane fusion and challenges associated with it. We will primarily discuss DNA-mediated and coiled-coil peptide-mediated fusion and their potential future direction. Lastly, inter/intra-cellular communication will be discussed where we will highlight some recent research on synthetic cell-to-synthetic cell and synthetic-to-natural cell communications.
2.1.1. Black lipid membrane 'Black' lipid membrane (BLM) gets its name because of its appearance by optical microscopy. BLM was discovered some 60 years ago when Mueller et al. [13,14] reconstituted first cell membrane structure in vitro from extracted brain lipids and measured the electrical polarization across the membrane. It is a unique setup where electrodes are placed at both sides of a standing lipid bilayer and the electrical conductivity across it is measured. Usually, two aqueous chambers are separated by a planar bilayer spanning an aperture on a hydrophobic (i.e., made of Teflon) septum with its size varying from 50 µm to 1 mm. There are two types of BLM depending on the orientation of the orifice, horizontal and vertical BLMs (Figure 1A). In both the cases, bilayer is formed by either pseudo-painting or dragging a lipid bubble over the aperture while the chambers are filled with buffers. Typically, for the incorporation of membrane proteins, diphytanoyl phosphatidylcholine (DPhPC) or a mixture of 1-palmitoyl, 2-oleoylphosphatidylethanolamine (POPE) and 1palmitoyl, 2-oleoylphosphatidylglycerol (POPG) (3:1) [15] are used with concentration varying from 5 mg/ml to 20 mg/ml in organic solvent like n-decane, hexadecane, or hexadecane/hexane (10:1).
The main limitation of this method, apart from the fact that bilayer formed by this method is fragile, is the presence of extra solvent in the bilayer membrane that compromises the measurements. Subsequently, a solvent-free bilayer assembly method was introduced by Montal and Mueller [16]. In this setup, two aqueous chambers with lipid monolayer on their surface are partitioned by a Teflon septum with an aperture above the water surface. Teflon septum is then lowered gradually into an aqueous bath which subsequently leads to the formation of a bilayer devoid of any solvent. However, this approach does not resolve the membrane stability issue. Over the years, BLM has proved to be a powerful method for studying the electrophysiology of ion channels and membrane proteins. Incorporation of membrane proteins to BLM is usually achieved by direct insertion of purified proteins into the bilayer or incorporated by fusion of proteoliposomes to the standing bilayer membrane. BLM is most useful for probing the biophysical properties of channels. For example, if a membrane protein has a conformational change that induces downstream effects, such effects will be difficult to detect in a BLM setup. Hence, utilizing this platform is mostly beneficial when studying the selectivity, conductivity, and drug pharmacology properties of reconstituted proteins. 63 with permission from American Chemical Society, copyright 2021.
Supported lipid bilayer (SLB) is a planar bilayer formed as a result of self-assembly of phospholipids on a hydrophilic (i.e., oxidized glass) surface [17,18]. The fluid nature of SLBs is restored by the presence of a thin water layer of ~1-2 nm between the solid surface and bilayer (Figure 1B) [19][20][21]. Unlike a suspended lipid bilayer in BLM which is quite fragile, SLB provides a robust and stable platform for surface-specific interactions. The stability of SLB is achieved by the efficient interaction between the solid support and the planar bilayer governed by van der Waals, hydration (a repulsion force between two hydrated surfaces), electrostatic, and steric forces [22,23].
There are majorly two different methods used for the formation of SLB: Langmuir-Blodgett deposition method and vesicle fusion method. In the former method, the lower leaflet of monolayer lipid is created at the air-water interface by slowly pulling out the hydrophilic surface submerged in the aqueous phase. The second step of the Langmuir-Blodgett method involves the deposition of a second lipid monolayer leaflet by horizontally dipping the surface to the air-water interface [17]. In the vesicle fusion method, SLB is formed by adsorption and fusion of small unilamellar vesicles (SUVs) on a hydrophilic surface [24,25]. A combination of the above two methods has been employed where bilayer was formed by vesicle fusion to a solid-supported lipid monolayer [26], and is useful in creating asymmetric bilayers [26,27]. The most-used substrates for SLBs are fused silica [17], mica [28,29], borosilicate glass [17,23] and oxidized silicon [17]. Other thin film metal surfaces have been employed for supported bilayers, including TiO2, indium-tin-oxide, gold, silver, and platinum [30].
Like any other techniques, the aforementioned methods have limitations including mechanically unstable bilayer (i.e., BLM), accessibility to only one side of membrane, and surface defects due to non-uniformity (i.e., SLB). A similar approach of what we know today as droplet interface bilayer (DIB) was introduced by Tsofina et al. [31] in 1966, almost the same period of time when BLM and SLB were introduced. DIB is formed when two aqueous droplets with lipid monolayer on their surface are brought together while submerged in a lipid-oil mixture [32,33]. There exists two ways to achieve DIB, one where lipids are dissolved in oil (e.g., hexadecane or squalene) and the other where lipids are introduced in the form of SUVs inside the aqueous droplet to the water-oil interface [34,35]. They are commonly referred to as lipid-out and lipid-in, respectively (Figure 1C). This platform has been used in electrophysiology studies of membrane/ion channels by either forming droplets on the tip of the agarose/agar coated-electrode [32,36] or placing the electrodes at the bottom of the droplets [37]. A modification of DIB was introduced as droplet on hydrogel supported bilayer (DHB) as a more robust method [38,39]. In DHB, an agarose substrate is formed on a glass surface followed by addition of a lipid-oil mixture, this step forms the lipid monolayer on the agarose surface. An aqueous droplet hanging on an agarose-coated electrode is submerged in an oil bath, spontaneously forming a monolayer. Then, the aqueous droplet is gently dropped to the agarose surface where it forms a bilayer. The bilayer formed by this method is stable for weeks and even resistant to mechanical shock (Figure 1D). Due to the defined compartmentalization in this method, DIBs have been used to recapitulate communication pathways and feedback cascades mediated by membrane proteins and porins. The ability to visualize diffusion of fluorescent molecules across droplets as well as to record electrical currents between droplets makes DIBs ideally suited for studying protein-mediated interactions between droplet-in-oil synthetic cells. The downside, however, is that the outer organic phase does not resemble the aqueous solutions in a natural environment and an oil-water interface may result in protein denaturation.
Unlike planar lipid bilayers, vesicles have an independent compartment that resembles a natural cell, separating an inner aqueous volume from an outer aqueous environment. Giant unilamellar vesicles (GUVs) are the most widely used model as synthetic cells and as protocells from the origin of life perspective [40]. They have a size between 1 to 100 µm in diameter, which is in the range of biological cells. Giant vesicles made of lipids are fragile and this has motivated the use of other membrane-forming materials. Polymersomes are comprised of chemically synthesized amphiphilic polymers that self-assemble to form vesicles [41]. They are robust and considered to be mechanically tough with low-permeability for ions as compared to lipid vesicles. Here we focus our discussion on lipid bilayer giant vesicles as lipids are the natural substrate for membrane proteins.
There are several methods available for the preparation of GUVs, and each of the methods is introduced here with its advantages and disadvantages.
The hydration method, also referred to as spontaneous swelling or gentle hydration, is regarded as one of the first approaches to make GUVs [42,43]. It involves a twostep procedure: (i) dehydration of the lipid on a substrate of choice (mainly glass), followed by (ii) rehydration of the deposited lipid films with a solution to be encapsulated.
During the rehydration, the temperature has to be higher than the lipid phase transition temperature to form GUVs [44]. One of the main disadvantages of this method is that the rehydration step requires a long incubation time, ranging from several hours to overnight [45]. An alternative method to accelerate this process is a widely used method called electroformation or electroswelling [46]. By applying an alternating current (AC)electric field on an electrically conductive surface (i.e., glass coated with indium tin oxide or platinum wires), a high yield of vesicles is achieved in a relatively short time (Fig- ure 1E) [47]. Still, drawbacks exist since the hydration method, including electroformation, cannot readily encapsulate large-sized molecules or used with high ionic strength solutions (for electroformation). To overcome this, microinjection of molecules through microneedles can be a viable strategy while only a limited amount of volume can be injected [48].
The main benefit of introducing microfluidics technology in making GUVs is that more uniform vesicles can be generated [49]. By using a microfluidics device, water-oilwater double emulsion droplets are formed with low polydispersity [50]. The middle oil phase is removed sequentially to let lipid monolayers in water-oil and oil-water interfaces meet and form vesicles with lipid bilayers (Figure 1E). A great advantage of this method is that it is much more efficient in encapsulating large molecules compared to the hydration method. However, drawbacks also exist because it is difficult to remove the oil phase completely; therefore, there may be residual oil in the vesicle membrane [51]. The presence of oil in the membrane has been a long-standing problem since oil can affect the biophysical properties of the membrane [52]. In this regard, an alternative method that replaces oil with alcohol has been developed [53]. Another well-known method that uses a microfluidics technique is called microfluidic jetting [54,55]. While the vesicles are generated from the planar lipid, some oil is still expected to be present in the membrane [56].
Developed by Pautot et al. [57], this method starts with forming water-in-oil single emulsion droplets with a lipid monolayer using various methods. Droplets are then placed on top of another oil-water interface with a lipid monolayer. Through centrifugation, droplets pass through the interface and lead to the formation of GUVs (Figure 1E). While residual oil may also be present in the membrane, the inverted emulsion method is widely adopted due to its simplicity (i.e., requires little time) and versatility (i.e., little restriction on what can be encapsulated [58].
One notable variant of the inverted emulsion method is called continuous droplet interface crossing encapsulation (cDICE), which improved on some of the drawbacks of the inverted emulsion method [59][60][61][62]. Water-in-oil droplets are injected into the customdesigned cylindrical chamber mount on a tabletop centrifuge where the oil-aqueous phase is formed by the centrifugal force. Instead of pushing all the droplets at once, droplets are pushed one by one through a capillary (Figure 1F) [63]. This allows lipid components to saturate at each interface, thereby forming more stable and high yield vesicles. However, because the cDICE method also uses oil as a lipid solvent, it is likely to contain some residual oil in the membrane.
Since each of the methods developed to form GUVs presents different pros and cons, it is important to select the proper method depending on the experimental needs. For instance, in cases where the remaining oil in the membrane may have a critical effect, such as examining the properties of membrane proteins, the hydration method can be more appropriate than the others [56,64]. However, if efficient encapsulation of large molecules such as enzymes is important or if uniform vesicle size is required, methods other than hydration should be considered. In addition to choosing the most suitable methods over others, there is plenty of room for the improvements of the existing approaches as well as the development of entirely new techniques that can overcome the shortcomings of the current methods.
The majority of interactions that membranous structures have with either each other or their external environment are mediated by membrane proteins. Using synthetic cells as model membranes for studying membrane-membrane interaction is not possible unless their membrane is decorated with various functional proteins that allow interactions with outer environment. As GUVs are used primarily as a model for synthetic cells, the ability to reconstitute membrane proteins into their lipid bilayers is an important consideration [65]. Below, we showcase the reconstitution of four different membrane proteins.
α-Hemolysin (αHL) is a water-soluble toxin secreted by Staphylococcus aureus that targets both prokaryotic and eukaryotic cells [66]. αHL is secreted as a monomer but forms a transmembrane heptameric pore when lodged in the bilayer membrane of the target cell [67], eventually causing cell death due to transport of small ions and low molecular weight molecules [68]. Structurally, αHL forms a β-barrel protein pore of 2.6 nm made of 14strand of anti-parallel β-sheets from seven αHL monomers [69]. Inspired by biological nanopores such as αHL, there has been significant advancement in the field of synthetic nanopore especially ones designed with DNA [70,71]. Unlike αHL, the size of DNA-based nanopore can be tuned from 4 to 30 nm in diameter [72][73][74] and these nanopores have been applied in numerous sensing applications [75]. αHL has been reconstituted using different bilayer platforms such as liposomes [76,77], SLBs [78,79], and DIBs [80]. The ease of αHL self-assembly in the membrane enables a variety of applications that require transporting ions and molecules across membrane, including biosensing [80], coacervation [81], and activation of genetic circuits [11]. For example, Adamala et al. generated liposomes encapsulating genetic circuits and cell lysates with transcriptional and translational activity and used αHL to enable membrane permeability of small molecular inducers (Figure 2A) [82]. More recently, Hilburger et al. developed a membrane AND gate where the release of the encapsulated material was dependent on a fatty acid and αHL [83].
The bacterial mechanosensitive channel was discovered as a channel that responded to suction during patch-clamp experiments [84]. Mechanosensitive channel of large conductance (MscL) has been extensively studied as one of the model membrane proteins owing to its highly conserved structure and function between bacteria species. In nature, MscL functions as an emergency release valve that prevents cell lysis when bacteria are exposed to severe osmotic downshifts. It consists of five identical subunits that open its pore of ~3 nm diameter when the membrane tension reaches the threshold of 10~12 mN/m [85,86]. As a nonselective channel with the largest known pore size, there is great opportunity to use MscL in building mechanosensitive synthetic cells [87].
Attempts to reconstitute MscL have been made in various types of planer lipid bilayers, including DHBs, SLBs, and DIBs [11,[88][89][90] [89,90]. It has only been in recent years that MscL was used in synthetic cells. Majumder et al. reported the development of mechanosensitive synthetic cells expressing MscL by using cell-free expression (CFE) [91]. The synthetic cells responded to osmotic downshock and activated a fluorescence calcium reporter (Figure 2B). Following this study, Garamella et al. created synthetic cells capable of responding to osmolarity downshock and inducing expression of a cytoskeletal protein MreB [92]. In a study carried out by Hindley et al., a vesicle-in-vesicle structure was made where calcium influx was initiated by αHL addition, where it subsequently activates phospholipase A2 to form a sPLA2-M-MscL network to release dye molecules through MscL (Figure 2C) [93]. Since MscL has been studied in detail, various MscL mutants have been investigated, such as those that exhibit a lower activation threshold (6 mN/m), temperature sensitivity, or chemically inducible features [88,94,95]. Other stimuli have also been shown to induce MscL activation, including pH, light, and ultrasound [96][97][98]. Given the tunability of MscL activities and stimuli-responsiveness, it is expected that MscL will continue to be actively deployed in the synthetic cell field.
The presence of nuclear envelope (NE) in eukaryotic cells is one of the features that differs between eukaryotic and prokaryotic cells. Cellular functions like protein synthesis, cell migration, and chromosome dynamics require a definite nuclear positioning which is regulated by LINC complexes (linker of nucleoskeleton and cytoskeleton). LINC complexes are comprised of SUN (Sad1, UNC-84) proteins, located in the inner nuclear membrane (INM) and KASH (Klarsicht, ANC-1, and Syne Homology) proteins in the outer nuclear membrane (ONM) [99]. Both SUN and KASH domains form a bridge between INM and ONM which plays crucial role in nuclear positioning and transmission of mechanical force across NE during meiosis [100,101].
Our lab recently demonstrated the use of HeLa-based CFE system for orientationspecific reconstitution of the LINC complexes proteins SUN1 and SUN2 [102]. Since SUN proteins are located in the NE between INM and ONM such that they are inaccessible to direct biochemical assays. In this study, we showed that SUN proteins expressed in HeLa CFE reactions inserted into bilayer membranes on supported bilayers with excess membrane reservoir (SUPER) templates. Using a protease protection assay, we determined the topology of SUN1 and SUN2 and discovered an additional transmembrane domain and hydrophobic regions that were previously unidentified. The directional reconstitution of SUN proteins were most likely mediated by microsome fusion to SUPER templates [103]. The utility of mammalian CFE system for reconstituting complex membrane proteins will open up more opportunities for creating synthetic cells with advanced sensing capabilities.
Bacteriorhodopsin is a seven-pass transmembrane protein from Archaea that drives protons across the membrane using energy from light [104][105][106]. The interest in reconstituting bacteriorhodopsin in membranes aiming to create artificial photosynthetic entities has a long history. First, in the work of Racker and Stoeckenius [107], purple membrane vesicles of Halobacterium halobium that contain bacteriorhodopsin were reconstituted and used to catalyze light-dependent ATP production. Later, different strategies were implemented to reconstitute bacteriorhodopsin in the membrane of liposomes or GUVs. For example, a method for detergent-mediated reconstitution of functional bacteriorhodopsin was presented by Dezi et al. [108]. Kahya et al. [109] proposed a method based on peptideinduced fusion to introduce bacteriorhodopsin-containing proteoliposomes into the membrane of GUVs as well. Lastly, detergent-mediated methods that rely on CFE of bacteriorhodopsin were shown to reconstitute functional proteins [110,111].
In order to produce light-driven energy production, bacteriorhodopsin is usually coreconstituted with ATP synthase subunits F0 and F1 [112]. Reconstitution of both proteins in polymersomes of amphiphilic triblock copolymer, PEtOz-PDMS-PEtOz [poly(2-ethyl-2-oxazoline)-b-poly(dimethylsiloxane)-b-poly(2-ethyl-2-oxazoline)] has been shown to create nano-scale photosynthetic organelles [113]. In a different study, instead of reconstituting both bacteriorhodopsin and ATP synthase on the same membrane, Chen et al. coated the surface of plasmonic colloidal capsules, made by assembly of Au-Ag nanorods, with purple membrane of Halobacterium halobium containing bacteriorhodopsin [114]. The neighboring nanoparticles of colloidal capsules created concentrated electric fields that caused increased light absorption by bacteriorhodopsin. The improved photo-absorption system was then coupled with proteoliposomes that harbored ATP synthase, creating a complete artificial photosynthetic system. The development of methods to create artificial photosynthetic entities expedited the translation of bacteriorhodopsin into applications in synthetic cells. Recently, artificial photosynthetic organelles were designed by Ahmad et al. [115]. These nanometer-sized organelles were used to activate flagellar motion as well as contraction of microtubule networks by kinersin-1 motors. Through oscillatory light illumination, Ahmad et al. were able to control the flagellar beating frequency. Similarly, proteoliposomes that contained bacteriorhodopsin and F0 -F1 ATP synthase subunits were used as energy-producing organelles to generate ATP for cell-free protein synthesis inside synthetic cells (Figure 2D) [116]. Finally, designing photosynthetic organelles is not limited to bacteriorhodopsin. For example, Lee et al. have demonstrated energy production by synthetic organelles made of ATP synthase and photoconverters including plant-derived photosystem II and bacteria-derived proteorhodopsin [117]. The energy produced by these nanometer-sized organelles was then coupled to polymerization of actin filaments.
The significant progress on methods and strategies of reconstituting bacteriorhodopsin on lipid bilayer membranes to create synthetic energy-producing organelles has certainly paved the way to create self-sustaining, long-lived synthetic cells. By coupling lightdriven energy production to cell motion, one can envisage more life-like synthetic cells in the near future.
Membrane fusion involves close contact between two bilayers that eventually leads to a single merged membrane (Figure 3A) [118]. Membrane fusion is a vital process in eukaryotic cells. It regulates major cellular process such as cellular trafficking, exocytosis, fertilization, and endocytosis. The most important condition for lipid bilayers to fully fuse is the lipid composition [118,119] and the close distance between the two bilayers. There are numerous approaches to promote membrane fusion, including metal ion-induced fusion, DNA-mediated, peptide nucleic acid (PNA)-mediated, coiled-coil peptides. Readers are recommended to the excellent review articles for additional details [118,120,121]. In the section below, we will focus on DNA-mediated and peptide-mediated fusion and highlight some recent studies.
DNA-based interaction provides an excellent strategy for membrane fusion due to the high selectivity between DNA strands. In this approach, cholesterol or lipid-anchored DNA spontaneously become part of the membrane with DNA strands exposed on the outer surface of vesicles [122,123]. By bringing apposing vesicles into close proximity, fusion of bilayer membrane occurs due to hybridization of DNA strands. Membrane fusion can be confirmed by lipid mixing and content mixing. Later, Hook and co-workers investigated the effect DNA length, number of DNA strands, and number of cholesterol groups on membrane fusion [124]. When comparing the efficacy of fusion between single stranded DNA and double stranded DNA with overhang (complementary overhang on the other vesicle), double stranded DNA showed improved binding affinity than single stranded DNA where there was some degree of dissociation of hybridized strands [123,124]. In case of single stranded DNA and single cholesterol group, content leakage and dissociation of docked vesicles were observed [124]. They also found that longer DNA strands increased vesicle docking but failed to lead to vesicle fusion. Recently, Peruzzi et al. showed the initiation of CFE by DNA-mediated vesicle fusion and found that phasesegregation of membrane domains enhances fusion between different vesicle populations (Figure 3B) [125]. Controlling fusion by using DNA-tethered vesicles provides exquisite specificity and expands the opportunities to control spatiotemporal dynamics of CFE reactions.
There exists numerous demonstration of peptide-mediated membrane fusion in the past, with examples such as vancomycin glycopeptide and D-Ala-D-Ala dipeptide or peptide nucleic acids [126,127]. Soluble N-ethylmaleimide-sensitive factor attachment protein receptors (SNAREs)-mediated fusion has proved to be most efficient and closest to biological system. SNAREs were identified as the key molecular players mediating membrane fusion [128,129]. There exists more than 30 SNARE family members in mammalian cells. Complementary sets of SNARE proteins, present on respective membranes, form a stable four coiled-coil α-helix bundle which ultimately leads to membrane fusion [130].
Inspired by the four-helix bundle formation, Kros group has developed a SNARE mimicking system comprised of lipid-conjugated oligopeptides with PEG as a spacer [131]. To mimic four-helix bundle complex, they introduced three heptad repeats unit of lysine-rich and glutamic acid-rich amino acids. These oligopeptides form a stable heterodimer with a dissociation constant of ~10 -7 M [132]. A recent study, reported by same group, demonstrated membrane fusion between GUVs with peptide K (KIAALKE)4 and LUVs with peptide E (EIAALEK)4 (Figure 3C) [133].
One of the most defining characteristics of natural cells is their ability to sense each other, communicate, and act as a consortium. Quorum-sensing, as an example of intra-and inter-species communication, is an essential aspect in bacteria population growth and a regulator of physiological processes [134,135]. In eukaryotic cells, for example, collective migration of a cohort of cells versus single cell locomotion highlights the importance of exchange of mechanical cues and mechanosensing [136][137][138]. The ability to sense the environmental cues as well as sending signals heavily relies on the existence of proteins residing on the membrane of natural cells. Membrane proteins such as GPCRs are critical in signaling cascades for cells to respond to changes in their environment. The advances in membrane protein reconstitution methods described earlier have led to significant progress in reconstituting intercellular communication among synthetic cells.
For successful biomimicry of natural cells as well as the creation of active materials, it is crucial for synthetic cells not only to be able to sense their environment and the presence of other synthetic cells, but to also communicate with them via signaling molecules. The difficulty of mimicking intercellular communication mechanisms can be attributed to the high complexity and specificity of extracellular signaling molecules and their targeted secretion in natural cells whereas synthetic cells merely rely on natural diffusion of small molecules based on chemical gradients. Since most synthetic cells are compartmentalized by phospholipid membranes, synthetic cell communication designs exploit the physical and biochemical properties of lipid bilayers such as their semi-permeability and their ability to host porins such as αHL. For example, gene-mediated communication between synthetic cells was engineered by encapsulating non-permeable molecule doxycycline (Dox) in one population and a plasmid encoding firefly luciferase (fluc) under a Tet promoter in the other population [82]. The release of Dox from the first community of synthetic cells and the entry of Dox into the second synthetic cell population, both mediated by αHL, triggers the synthesis of fluc. Additionally, further genetic circuits are engineered that rely on free diffusion of Arabinose across liposome bilayer membranes or depend on SNAREmediated fusion of two different populations of liposomes. A drawback of such a system is that signaling heavily relies on one molecule and its natural diffusion rate leading to inefficient signal propagation that fades over time.
To overcome the aforementioned drawback, Buddingh et al. designed sender synthetic cells that use adenosine monophosphate (AMP) as the signaling molecule [139]. Upon diffusing into the receiver cells through αHL, AMP binds to glycogen phosphorylase b and allosterically activates the enzyme which leads to the production of NADH through a cascade of reactions. This signal amplification strategy allows the system to propagate the signal over long distances as one molecule of AMP activates an enzyme that produces a large amount of NADH (Figure 4A). In an uncommon approach, the membrane has been used as a part of the signaling cascade where phospholipid vesicles are sender cells and proteinosomes displaying an enzyme are receivers [140]. The two populations of synthetic cells communicate using glucose as the signal molecule and the receiver synthetic cells process glucose via glucose oxidase (GOx) as a component of their membranes.
In another work, Yang et al. demonstrated a DNA-origami-based pore that opens only when two synthetic cells are in contact, allowing material exchange only when two synthetic cells are in close proximity [141]. Such a design can significantly help in concentrated signal release in contrast to the uniform release of molecules through αHL. Another innovative example of concentrated signal release upon synthetic cells contact is the work of Chakraborty et al. where the synthetic cell adhesion between prey and predator populations is triggered upon bioluminescence from predator cells that, in turn, dimerizes proteins iLID and Nano, each of which resides in the membrane of one group of synthetic cells [142]. The dimerization reconstitutes synthetic cell adhesion that leads to opening of αHL that is otherwise blocked unless synthetic cells are in contact [143]. The opening of αHL activates phospholipase A2(PLA2) inside the prey cells through diffusion of calcium ions from predator cells. Activation of PLA2 causes the cleavage of phospholipid acyl chains that leads to the collapse of prey cells. Lastly, quorum-sensing of synthetic cells has been shown by Niederholtmeyer et al. [144]. In their work, the synthetic cell's membrane is composed of porous polymer acrylate that allows diffusion of molecules up to 2 MDa. Due to this diffusion constraint, receiver synthetic cells produce desirable signals based on their distance from the sender cells and only when their population is above a certain density (Figure 4B).
In addition to compartmentalized synthetic cells, synthetic cell communication has been reconstituted between water-in-oil droplets as well as liquid-liquid phase-separated droplets. Using DIBs, the diffusion of membrane-permeable molecules and pore-mediated propagation of signaling molecules among droplets that recapitulates differentiation and simple feedback between sender and receiver droplets have been demonstrated (Figure 4C) [145]. Utilizing a similar design and a CFE system, Booth et al. created light-sensitive tissues made of droplets-in-oil that communicate only in presence of external light triggers [146]. Even though αHL is the most common membrane protein in synthetic cell communication studies, other proteins such as MscL have also been used as a part of signaling cascade or to mediate the propagation of signal molecules. For example, Haylock et al. have shown the communication of droplets-in-oil mediated by MscL G26C that opens upon external chemical stimuli [147]. In another work, Strutt et al. reconstituted MscL in DIBs where MscL opening is triggered by membrane tension due to membrane asymmetry [148].
Membrane-less liquid-liquid phase-separated droplets can also be used as models of synthetic cells. Interactive behaviors such as prey and predator, for example, has been reconstructed between proteinosomes and coacervates [149]. Interactions between classic phospholipid-bound synthetic cells and hybrid synthetic cells or more uncommon coacervates that do not possess a physical boundary are open for exploration. Another potential platform for studying membrane-membrane interaction could be the recently discovered peptide bilayer for synthetic cell research [150].
One of the pioneering works in the synthetic cell-natural cell communication was carried out by Lentini et al. [151]. In their work, the synthesis of αHL was controlled by a riboswitch that activated translation in the presence of a signaling molecule theophylline. αHL then formed pores in the membrane of synthetic cells and allowed the release of IPTG that, in turn, activated the synthesis of GFP in E. coli. Later, Lentini et al. designed synthetic cells that can sense the presence of V. fischeri through N-3-(oxohexanoyl)homoserine lactone (3OC6 HSL) and communicate with E. coli by synthesis of another homoserine lactone 3OC12 HSL, or participate in the V. fischeri quorum-sensing mechanism by synthesis and release of 3OC6 HSL (Figure 4D) [152]. Recently, the communication between cell-sized synthetic cells and bacteria was taken to a new level by engineering light-harvesting E. coli that creates proton gradients leading to a pH change in the environment. By linking this pH change to pH-dependent DNA origami attachment to the synthetic cell membrane, Jahnke et al. showed synthetic cell shape change and deformation can be triggered by proton pumping activity of E. coli [153]. Apart from compartmentalized synthetic cells, the DIB system has also been used to construct inducible gene circuits between E. coli and synthetic cells confined in droplets-in-oil [154].
Another intriguing yet more complicated form of synthetic cell-natural cell communication is the interaction between synthetic cells and eukaryotic cells. For example, synthetic enzymes have been compartmentalized in both liposomes and alginate microspheres to mimic the function of cytochrome P450 enzymes in dealkylation and hydroxylation of substrates. The products of these reactions then diffuse to mammalian HepG2 cells [155]. Even though the reaction products were fluorophore molecules, the work underscores visions to reconstitute more complicated synthetic cell-natural cell communication. In another work, Toparlak et al. constructed synthetic cells that contain or synthesize a neurotrophic factor that aids in neuronal differentiation and growth [156]. Most synthetic cells used in intercellular communication are based on small ~100 nm vesicles. The scarcity of work on cell-sized (~10 µm) synthetic cell-eukaryotic cell communication can be attributed to challenges including possible toxicity effects of synthetic cells, different timescales in synthetic cell life versus eukaryotic cell growth, and the stability of synthetic cells in physiological conditions.
Even though intercellular communication is a critical characteristic of living organisms and is responsible for their adaptability, growth, and survival, it is in its infancy for synthetic cells. The difficulty of reconstituting complex response and feedback systems to specific signaling molecules due to the limited pool of resources in a synthetic cell, nonspecificity of membrane pores in allowing diffusion of molecules, and lack of transport mechanisms between synthetic cells create barriers for developing effective and efficient communication strategies between synthetic cells. This further illustrates the significance of reconstituting liposome fusion as it enables biomimicry of mechanisms found in exocytosis or viral infection. Efforts in mediating communication via more specific membrane proteins or fusion through specific DNA pairing allow more specific targeted signal delivery and make efficient communication possible.
The desire to recreate complex cellular processes has led the emergence of bottomup synthetic biology. Synthetic cell research has propelled our understanding about biological processes such as protein synthesis, exocytosis (membrane fusion), and cell-to-cell communications. We discussed different platforms of generating synthetic lipid bilayer membrane in the context of studying different ion channels and membrane proteins. There has been significant progress in generating giant vesicles with maximum encapsulation and minimum-to-no leakage [59], especially in droplet microfluidics [157].
Although DNA-mediated and coiled-coil peptide-mediated membrane fusion have gained popularity, they suffer from issues of controllability and stability of hemi-fusion or fusion intermediates. Recently, inter-cellular communications among synthetic cells and between synthetic cells and natural cells have received great attention in synthetic cell research [158]. We believe the next frontier of synthetic cell research will focus on developing increasingly sophisticated synthetic cell models that communicate with natural living cells.