An official website of the United States government
Abstract Flapping insect wings collide with vegetation and other obstacles during flight. Repeated collisions may irreversibly damage the insect wing, thereby compromising the insect's ability to fly. Further, reaction torques caused by the collision may destabilize the insect and hinder its ability to maneuver. To mitigate the adverse effects of impact, some insect wings are equipped with a flexible joint called a “costal break.” The costal break buckles once it exceeds a critical angle, which is believed to improve flight stability and prevent irreversible wing damage. However, to our knowledge, there are no models to predict the dynamics of the costal break. Through this research, we develop a simple model of an insect wing with a costal break. The wing was modeled as two beams interconnected by a torsional spring, where the stiffness of the torsional spring instantaneously decreases once it has exceeded a critical angle. We conducted a series of static tests to approximate model parameters. Then, we used numerical simulation to estimate the reaction moments, angular impulse, and peak stresses experienced by the wing during a collision. When evaluated over the duration of an external load, we found that buckling could reduce reaction moments and angular impulse up to 82% and 99%, respectively, compared to a homogeneous wing. This suggests the costal break can enhance flight stability. On the other hand, buckling maximally increased peak stresses two times compared to a homogeneous wing, indicating the costal break does not reduce likelihood of damage under the simplified loading considered.
more »
« less
Insect Wing Buckling Influences Stress and Stability During Collisions
Abstract Flapping insect wings frequently collide with vegetation and other obstacles during flight. Repeated collisions may irreversibly damage the insect wing, thereby compromising the insect’s ability to fly. Further, reaction torques caused by the collision may destabilize the insect and hinder its ability to maneuver. To mitigate the adverse effects of impact, some insect wings are equipped with a flexible joint called a “costal break.” The costal break buckles once it exceeds a critical angle, which is believed to improve flight stability and prevent irreversible wing damage. However, to our knowledge, there are no models to predict the dynamics of the costal break. Through this research, we develop a simple model of an insect wing with a costal break. The wing was modeled as two beams interconnected by a torsional spring, where the stiffness of the torsional spring instantaneously decreases once it has exceeded a critical angle. We conducted a series of static tests to approximate model parameters. Then, we used numerical simulation to estimate the peak stresses and reaction moments experienced by the wing during a collision. We found that costal break increased the wing’s natural frequency by about 50% compared to a homogeneous wing and thus reduced the stress associated with normal flapping. Buckling did not significantly affect peak stresses during collision. Joint buckling reduced the peak reaction moment by about 32%, suggesting that the costal break enhances flight stability.
more »
« less
- Award ID(s):
- 1942810
- PAR ID:
- 10330811
- Date Published:
- Journal Name:
- ASME 2021 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 33rd Conference on Mechanical Vibration and Sound
- Volume:
- 10
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Flying insects are thought to achieve energy-efficient flapping flight by storing and releasing elastic energy in their muscles, tendons, and thorax. However, ‘spring-wing’ flight systems consisting of elastic elements coupled to nonlinear, unsteady aerodynamic forces present possible challenges to generating stable and responsive wing motion. The energetic efficiency from resonance in insect flight is tied to the Weis-Fogh number (N), which is the ratio of peak inertial force to aerodynamic force. In this paper, we present experiments and modeling to study how resonance efficiency (which increases withN) influences the control responsiveness and perturbation resistance of flapping wingbeats. In our first experiments, we provide a step change in the input forcing amplitude to a series-elastic spring-wing system and observe the response time of the wing amplitude increase. In our second experiments we provide an external fluid flow directed at the flapping wing and study the perturbed steady-state wing motion. We evaluate both experiments across Weis-Fogh numbers from 1 < N < 10. The results indicate that spring-wing systems designed for maximum energetic efficiency also experience trade-offs in agility and stability as the Weis-Fogh number increases. Our results demonstrate that energetic efficiency and wing maneuverability are in conflict in resonant spring-wing systems, suggesting that mechanical resonance presents tradeoffs in insect flight control and stability.more » « less
-
Small-scale flapping-wing micro air vehicles (FWMAVs) are an emerging robotic technology with many applications in areas including infrastructure monitoring and remote sensing. However, challenges such as inefficient energetics and decreased payload capacity preclude the useful implementation of FWMAVs. Insects serve as inspiration to FWMAV design owing to their energy efficiency, maneuverability, and capacity to hover. Still, the biomechanics of insects remain challenging to model, thereby limiting the translational design insights we can gather from their flight. In particular, it is not well-understood how wing flexibility impacts the energy requirements of flapping flight. In this work, we developed a simple model of an insect drive train consisting of a compliant thorax coupled to a flexible wing flapping with single-degree-of-freedom rotation in a fluid environment. We applied this model to quantify the energy required to actuate a flapping wing system with parameters based off a hawkmoth Manduca sexta. Despite its simplifications, the model predicts thorax displacement, wingtip deflection and peak aerodynamic force in proximity to what has been measured experimentally in flying moths. We found a flapping system with flexible wings requires 20% less energy than a flapping system with rigid wings while maintaining similar aerodynamic performance. Passive wing deformation increases the effective angle of rotation of the flexible wing, thereby reducing the maximum rotation angle at the base of the wing. We investigated the sensitivity of these results to parameter deviations and found that the energetic savings conferred by the flexible wing are robust over a wide range of parameters.more » « less
-
Abstract Flying insects have a robust flight system that allows them to fly even when their forewings are damaged. The insect must adjust wingbeat kinematics to aerodynamically compensate for the loss of wing area. However, the mechanisms that allow insects with asynchronous flight muscle to adapt to wing damage are not well understood. Here, we investigated the phase and amplitude relationships between thorax deformation and flapping angle in tethered flying bumblebees subject to wing clipping and weighting. We used synchronized laser vibrometry and high-speed videography to measure thorax deformation and flapping angle, respectively. We found that changes in wing inertia did not affect thorax deformation amplitude but did influence wingbeat frequency. Increasing wing inertia increased flapping amplitude and caused a phase lag between thorax deformation and flapping angle, whereas decreasing wing inertia did not affect flapping amplitude and caused the flapping angle to lead thorax deformation. Our findings indicate that bumblebees adapt to wing damage by adjusting their wingbeat frequency rather than altering their wing stroke amplitude. Additionally, our results suggest that bumblebees operate near a wing-hinge-dominated resonant frequency, and that moments generated by steering muscles within the wing hinge influence the phase between thorax deformation and wing stroke nontrivially. These insights can inform the design of resilient, insect-inspired flapping-wing micro air vehicles.more » « less
-
Flying insects have elastic materials within their exoskeletons that could reduce the energetic cost of flight if their wingbeat frequency is matched to a mechanical resonance frequency. Flapping at resonance may be essential across flying insects because of the power demands of small-scale flapping flight. However, building up large-amplitude resonant wingbeats over many wingstrokes may be detrimental for control if the total mechanical energy in the spring-wing system exceeds the per-cycle work capacity of the flight musculature. While the mechanics of the insect flight apparatus can behave as a resonant system, the question of whether insects flap their wings at their resonant frequency remains unanswered. Using previous measurements of body stiffness in the hawkmoth, Manduca sexta , we develop a mechanical model of spring-wing resonance with aerodynamic damping and characterize the hawkmoth's resonant frequency. We find that the hawkmoth's wingbeat frequency is approximately 80% above resonance and remains so when accounting for uncertainty in model parameters. In this regime, hawkmoths may still benefit from elastic energy exchange while enabling control of aerodynamic forces via frequency modulation. We conclude that, while insects use resonant mechanics, tuning wingbeats to a simple resonance peak is not a necessary feature for all centimetre-scale flapping flyers.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1115/DETC2021-70551
