An official website of the United States government
Abstract A shallow sub‐seafloor seismic model that includes well‐determined seismic velocities and clarifies sediment‐crust discontinuities is needed to characterize the physical properties of marine sediments and the oceanic crust and to serve as a reference for deeper seismic modeling endeavors. This study estimates the seismic structure of marine sediments and the shallow oceanic crust of the Alaska‐Aleutian subduction zone at the Alaska Peninsula, using data from the Alaska Amphibious Community Seismic Experiment (AACSE). We measure seafloor compliance and Ps converted wave delays from AACSE ocean‐bottom seismometers (OBS) and seafloor pressure data and interpret these measurements using a joint Bayesian Monte Carlo inversion to produce a sub‐seafloor S‐wave velocity model beneath each available OBS station. The sediment thickness across the array varies considerably, ranging from about 50 m to 2.80 km, with the thickest sediment located in the continental slope. Lithological composition plays an important role in shaping the seismic properties of seafloor sediment. Deep‐sea deposits on the incoming plate, which contain biogenic materials, tend to have reduced S‐wave velocities, contrasting with the clay‐rich sediments in the shallow continental shelf and continental slope. A difference in S‐wave velocities is observed for upper oceanic crust formed at fast‐rate (Shumagin) and intermediate‐rate (Semidi) spreading centers. The reduced S‐wave velocities in the Semidi crust may be caused by increased faulting and possible lithological variations, related to a previous period of intermediate‐rate spreading.
more »
« less
Multiple drivers and controls of pockmark formation across the Canterbury Margin, New Zealand
Shallow seabed depressions attributed to focused fluid seepage, known as pockmarks, have been documented in all continental margins. In this study, we demonstrate how pockmark formation can be the result of a combination of multiple factors—fluid type, overpressures, seafloor sediment type, stratigraphy and bottom currents. We integrate multibeam echosounder and seismic reflection data, sediment cores and pore water samples, with numerical models of groundwater and gas hydrates, from the Canterbury Margin (off New Zealand). More than 6800 surface pockmarks, reaching densities of 100 per km2, and an undefined number of buried pockmarks, are identified in the middle to outer shelf and lower continental slope. Fluid conduits across the shelf and slope include shallow to deep chimneys/pipes. Methane with a biogenic and/or thermogenic origin is the main fluid forming flow and escape features, although saline and freshened groundwaters may also be seeping across the slope. The main drivers of fluid flow and seepage are overpressure across the slope generated by sediment loading and thin sediment overburden above the overpressured interval in the outer shelf. Other processes (e.g. methane generation and flow, a reduction in hydrostatic pressure due to sea-level lowering) may also account for fluid flow and seepage features, particularly across the shelf. Pockmark occurrence coincides with muddy sediments at the seafloor, whereas their planform is elongated by bottom currents.
more »
« less
- Award ID(s):
- 1925974
- PAR ID:
- 10333989
- Date Published:
- Journal Name:
- Basin Research
- ISSN:
- 0950-091X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)Turbidity currents deliver sediment rapidly from the continental shelf to the slope and beyond; and can be triggered by processes such as shelf resuspension during oceanic storms; mass failure of slope deposits due to sediment- and wave-pressure loadings; and localized events that grow into sustained currents via self-amplifying ignition. Because these operate over multiple spatial and temporal scales, ranging from the eddy-scale to continental-scale; coupled numerical models that represent the full transport pathway have proved elusive though individual models have been developed to describe each of these processes. Toward a more holistic tool, a numerical workflow was developed to address pathways for sediment routing from terrestrial and coastal sources, across the continental shelf and ultimately down continental slope canyons of the northern Gulf of Mexico, where offshore infrastructure is susceptible to damage by turbidity currents. Workflow components included: (1) a calibrated simulator for fluvial discharge (Water Balance Model - Sediment; WBMsed); (2) domain grids for seabed sediment textures (dbSEABED); bathymetry, and channelization; (3) a simulator for ocean dynamics and resuspension (the Regional Ocean Modeling System; ROMS); (4) A simulator (HurriSlip) of seafloor failure and flow ignition; and (5) A Reynolds-averaged Navier–Stokes (RANS) turbidity current model (TURBINS). Model simulations explored physical oceanic conditions that might generate turbidity currents, and allowed the workflow to be tested for a year that included two hurricanes. Results showed that extreme storms were especially effective at delivering sediment from coastal source areas to the deep sea, at timescales that ranged from individual wave events (~hours), to the settling lag of fine sediment (~days).more » « less
-
The Oregon Slope Base Shallow Profiler Mooring is situated adjacent to the continental slope off the coast of Oregon at ~2,900 meters water depth. Here, ocean water properties are profoundly impacted by the California Current and internal waves. The coastal region of the Pacific Northwest is a classic wind-driven upwelling system where nutrient-rich deep waters rise to replace warmer surface waters, resulting in high marine productivity that attracts zooplankton, fish, and marine mammals. Near-bottom fauna are periodically negatively impacted by the flow of deep waters with very low oxygen concentrations (hypoxic events), and upwelling of corrosive, acidified waters onto the continental shelf. This two-legged mooring is attached to an electro-optical cable that supplies power and bandwidth and hosts a Shallow Profiler (SF01B), a 200m Platform (PC01B), and a Winch Controller (SC01B). The 200 m platform and Shallow Profiler both house scientific instrumentation, and the profiler is tethered to a mooring-mounted winch that allows it to travel across a fixed depth in the water column (20 m to 200 m below sea surface), determined by currents and wave conditions at the surface. The mooring is co-located with a Low-Power junction box that collects complementary data near the seafloor. When coupled with other Cabled Array and Endurance Array installations off the central Oregon coast, the Slope Base Shallow Profiler Mooring allows for measurements of a variety of coastal phenomena, including cross-shelf and along-shelf variability.more » « less
-
Abstract Offshore meteoric groundwater (OMG) has long been hypothesized to be a driver of seafloor geomorphic processes in continental margins worldwide. Testing this hypothesis has been challenging because of our limited understanding of the distribution and rate of OMG flow and seepage, and their efficacy as erosive/destabilizing agents. Here we carry out numerical simulations of groundwater flow and slope stability using conceptual models and evolving stratigraphy—for passive siliciclastic and carbonate margin cases—to assess whether OMG and its evolution during a late Quaternary glacial cycle can generate the pore pressures required to trigger mechanical instabilities on the seafloor. Conceptual model results show that mechanical instabilities using OMG flow are most likely to occur in the outer shelf to upper slope, at or shortly before the Last Glacial Maximum sea‐level lowstand. Models with evolving stratigraphy show that OMG flow is a key driver of pore pressure development and instability in the carbonate margin case. In the siliciclastic margin case, OMG flow plays a secondary role in preconditioning the slope to failure. The higher degree of spatial/stratigraphic heterogeneity of carbonate margins, lower shear strengths of their sediments, and limited generation of overpressures by sediment loading may explain the higher susceptibility of carbonate margins, in comparison to siliciclastic margins, to mechanical instability by OMG flow. OMG likely played a more significant role in carbonate margin geomorphology (e.g., Bahamas, Maldives) than currently thought.more » « less
-
Guaymas Basin is a young marginal rift basin in the Gulf of California, Mexico, characterized by active seafloor spreading and rapid sediment deposition, including organic-rich sediments. International Ocean Discovery Program (IODP) Expedition 385 drilled two sites near the Sonora margin, Sites U1549 and U1552, that are both close to a gas upflow pipe with Site U1549 being more distal to the corresponding upflow zone than Site U1552. Attenuated cold seepage conditions exist at Site U1549 in the central basin with methane occurrence below 25 meters below seafloor (mbsf), and hydrate was found to be present from ~25 mbsf at Site U1552. These two sites, ~12 km apart, represent an opportunity to study the influence of gas hydrate occurrence and methane seepage in shallow young organic-rich sediments (<170 mbsf; <0.29 Ma). In this data report, we present rock magnetic and geochemical data obtained from Sites U1549 and U1552 to characterize aqueous, solid iron, and sulfur phases present in the sediments, with a focus on iron oxides and iron sulfides. Guaymas Basin sediments are rich in reactive iron, mainly as pyrite. Iron oxides (magnetite and hematite) and authigenic iron sulfides (pyrite and greigite) are ubiquitously found in the sediments, and iron oxides are reduced to form pyrite. Pore water analysis seems to characterize current environmental and diagenetic processes, especially those related to fluid and gas circulation. Differences in methane seepage and hydrate occurrence could be due to spatial variations in methane fluid flow and pathways, leading to dynamic conditions at these sites with an impact on the sulfate reduction and anaerobic oxidation of methane rates. Authigenic magnetic mineralogy, mostly sensitive to biogeochemical processes at the sulfate–methane transition zone, would respond to fluid and gas flow variations, especially of methane.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1111/bre.12663
