An official website of the United States government
This study focuses on the development of environmentally sustainable polypropylene (PP)-based composites with the potential for biodegradability by incorporating cellulose and the oligomeric siloxane ES-40. Targeting industrial applications such as fused deposition modeling (FDM) 3D printing, ES-40 was employed as a precursor for the in situ formation of silica particles via hydrolytic polycondensation (HPC). Two HPC approaches were investigated: a preliminary reaction in a mixture of cellulose, ethanol, and water, and a direct reaction within the molten PP matrix. The composites were thoroughly characterized using rotational rheometry, optical microscopy, differential scanning calorimetry, and dynamic mechanical analysis. Both methods resulted in composites with markedly reduced crystallinity and shrinkage compared to neat PP, with the lowest shrinkage observed in blends prepared directly in the extruder. The inclusion of cellulose not only enhances the environmental profile of these composites but also paves the way for the development of PP materials with improved biodegradability, highlighting the potential of this technique for fabricating more amorphous composites from crystalline or semi-crystalline polymers for enhancing the quality and dimensional stability of FDM-printed materials.
more »
« less
High throughput chirped pulse Fourier-transform microwave spectroscopy of ethanol and water clusters
Here we discuss the design and performance of a novel high-throughput instrument for Chirped Pulse Fourier-transform Microwave (CP-FTMW) spectroscopy, and demonstrate its efficacy through the identification of the lowest energy conformers of the ethanol trimer and mixed water : ethanol trimers. Rotational constants for these trimers were calculated from observed lines in the spectra from 10 to 14 GHz, and compared to the results of anharmonic ab initio computations. As predicted, all trimers share a cyclic donor–acceptor hydrogen bonding structure, with the ethanol monomer favoring the gauche conformation in the lowest energy structures. The increased speed of data collection and resulting sensitivity opens a new avenue into rotational studies of higher order clusters.
more »
« less
- Award ID(s):
- 1665467
- PAR ID:
- 10341672
- Date Published:
- Journal Name:
- Physical Chemistry Chemical Physics
- Volume:
- 24
- Issue:
- 22
- ISSN:
- 1463-9076
- Page Range / eLocation ID:
- 13831 to 13838
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The gas-phase rotational spectrum from 8 to 750 GHz and the high-resolution infrared (IR) spectrum of pyridazine (o-C4H4N2) have been analyzed for the ground and four lowest-energy vibrationally excited states. A combined global fit of the rotational and IR data has been obtained using a sextic, centrifugally distorted-rotor Hamiltonian with Coriolis coupling between appropriate states. Coriolis coupling has been addressed in the two lowest-energy coupled dyads (ν16, ν13 and ν24, ν9). Utilizing the Coriolis coupling between the vibrational states of each dyad and the analysis of the IR spectrum for ν16 and ν9, we have determined precise band origins for each of these fundamental states: ν16 (B1) = 361.213 292 7 (17) cm−1, ν13 (A2) = 361.284 082 4 (17) cm−1, ν24 (B2) = 618.969 096 (26) cm−1, and ν9 (A1) = 664.723 378 4 (27) cm−1. Notably, the energy separation in the ν16-ν13 Coriolis-coupled dyad is one of the smallest spectroscopically measured energy separations between vibrational states: 2122.222 (72) MHz or 0.070 789 7 (24) cm−1. Despite ν13 being IR inactive and ν24 having an impractically low-intensity IR intensity, the band origins of all four vibrational states were measured, showcasing the power of combining the data provided by millimeter-wave and high-resolution IR spectra. Additionally, the spectra of pyridazine-dx isotopologues generated for a previous semi-experimental equilibrium structure (reSE) determination allowed us to analyze the two lowest-energy vibrational states of pyridazine for all nine pyridazine-dx isotopologues. Coriolis-coupling terms have been measured for analogous vibrational states across seven isotopologues, both enabling their comparison and providing a new benchmark for computational chemistry.more » « less
-
The many-body expansion (MBE) is promising for the efficient, parallel computation of lattice energies in organic crystals. Very high accuracy should be achievable by employing coupled-cluster singles, doubles, and perturbative triples at the complete basis set limit [CCSD(T)/CBS] for the dimers, trimers, and potentially tetramers resulting from the MBE, but such a brute-force approach seems impractical for crystals of all but the smallest molecules. Here, we investigate hybrid or multi-level approaches that employ CCSD(T)/CBS only for the closest dimers and trimers and utilize much faster methods like Møller–Plesset perturbation theory (MP2) for more distant dimers and trimers. For trimers, MP2 is supplemented with the Axilrod–Teller–Muto (ATM) model of three-body dispersion. MP2(+ATM) is shown to be a very effective replacement for CCSD(T)/CBS for all but the closest dimers and trimers. A limited investigation of tetramers using CCSD(T)/CBS suggests that the four-body contribution is entirely negligible. The large set of CCSD(T)/CBS dimer and trimer data should be valuable in benchmarking approximate methods for molecular crystals and allows us to see that a literature estimate of the core-valence contribution of the closest dimers to the lattice energy using just MP2 was overbinding by 0.5 kJ mol−1, and an estimate of the three-body contribution from the closest trimers using the T0 approximation in local CCSD(T) was underbinding by 0.7 kJ mol−1. Our CCSD(T)/CBS best estimate of the 0 K lattice energy is −54.01 kJ mol−1, compared to an estimated experimental value of −55.3 ± 2.2 kJ mol−1.more » « less
-
The measurement of over 24,000 new rotational transitions of chloropyrazine (C4H3N2Cl, la = 1.55 D, lb = 0.14 D) in the 130–375 GHz frequency region enabled the assignments of the rotational spectra for the ground vibrational states of the [35Cl]- and [37Cl]-isotopologues and a combined total of 22 low-energy excited vibrational states. These vibrational states have been fit to sextic A-reduced Hamiltonians with low error (<0.05 MHz). These data allow for precise determination of the vibration-rotation interaction constants for the six lowest-energy fundamental vibrational modes (m24, m17, m23, m16, m22, and m15) of the [35Cl]-isotopologue and the four lowest-energy fundamental vibrational modes (m24, m17, m23, and m16) of the [37Cl]-isotopologue. In addition, many combination and overtone states were observed, bringing the total number of excited states to seventeen for the [35Cl]-isotopologue and five for the [37Cl]-isotopologue. The spectroscopic constants for the ground state, m24, and m17 for each isotopologue are very well determined (Nlines > 1400 for each least-squares fit). The vibration-rotation interaction constants experimentally determined for all observed fundamentals are generally in quite close agreement with their predicted (B3LYP/6-311+G(2d,p)) values.more » « less
-
A comprehensive set of single-component and binary isotherms were collected for ethanol/water adsorption into the siliceous forms of 185 known zeolites using grand-canonical Monte Carlo simulations. Using these data, a systematic analysis of ideal/real adsorbed-solution theory (IAST/RAST) was conducted and activity coefficients were derived for ethanol/water mixtures adsorbed in different zeolites based on RAST. It was found that activity coefficients of ethanol are close to unity while activity coefficients of water are larger in most zeolites, indicating a positive excess free energy of the mixture. This observation can be attributed to water/ethanol interactions being less favorable than water/water interactions in the single-component adsorption of water at comparable loadings. The deviation from ideal behavior can be highly structure-dependent but no clear correlation with pore diameters was identified. Our analysis also demonstrates the following: (1) accurate unary isotherms in the low-loading regime are critical for obtaining physically sensible activity coefficients; (2) the global regression scheme to solve for activity model parameters performs better than fitting activity models to activity coefficients calculated locally at each binary state point; and (3) including the dependence on adsorption potential offers only a minor benefit for describing binary adsorption at the lowest fugacities. Finally, the Margules activity model was found incapable of capturing the non-ideal adsorption behavior over the entire range of fugacities and compositions in all zeolites, but for conditions typical of solution-phase adsorption, RAST predictions using zeolite-specific or even bulk Margules parameters provide an improved description compared to IAST.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/D2CP01055K
