skip to main content


Title: Surface ligands influence the selectivity of cation uptake in polyoxovanadate–alkoxide clusters
The selective uptake of lithium ions is of great interest for chemists and engineers because of the numerous uses of this element for energy storage and other applications. However, increasing demand requires improved strategies for the extraction of this element from mixtures containing high concentrations of alkaline impurities. Here, we study solution phase interactions of lithium, sodium, and potassium cations with polyoxovanadate-alkoxide clusters, [V 6 O 7 (OR) 12 ] (R = CH 3 , C 3 H 7 , C 5 H 11 ), using square wave voltammetry and cyclic voltammetry. In all cases, the most reducing event of the cluster shifts anodically as the ionic radius of the cation decreases, indicating increased stability of the reduced cluster and further suggesting that these assemblies might be useful for the selective uptake of Li + . Exploring the consequence of ligand length, we found that the short-chain cluster, [V 6 O 7 (OCH 3 ) 12 ], irreversibly binds Li + in the presence of excess potassium (K + ) and exhibits an electrochemical response in titration experiments similar to that observed upon the addition of Li + to the POV–alkoxide in the presence of non-coordinating tetrabutylammonium ions. However, in the presence of excess sodium (Na + ), the cluster showed only a modest preference for lithium, with exchange between sodium and lithium ions governed by equilibrium. Extending these studies to [V 6 O 7 (OC 5 H 11 ) 12 ], we found that the presence of the pentyl ligands allows the assembly to irreversibly bind Li + in the presence of Na + or K + . The change in mechanism caused by surface functionalization of the clusters increases the differential binding affinity for more compact cations, translating to improved selectivity for Li + uptake in these molecular assemblies.  more » « less
Award ID(s):
2015859 2015749
NSF-PAR ID:
10342106
Author(s) / Creator(s):
; ; ; ;
Date Published:
Journal Name:
Journal of Materials Chemistry A
Volume:
10
Issue:
22
ISSN:
2050-7488
Page Range / eLocation ID:
12070 to 12078
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Here, we expand on the synthesis and characterization of chloride-functionalized polyoxovanadate-alkoxide (POV-alkoxide) clusters, to include the halogenation of mixed-valent vanadium oxide assemblies. These findings build on our previously disclosed results describing the preparation of a mono-anionic chloride-functionalized cluster, [V 6 O 6 Cl(OC 2 H 5 ) 12 ] 1− , by chlorination of [V 6 O 7 (OC 2 H 5 ) 12 ] 2− with AlCl 3 , aimed at understanding the electronic consequences of the introduction of halide-defects in bulk metal oxides ( e.g. VO 2 ). While chlorination of the mixed-valent POV-ethoxide clusters was not possible using AlCl 3 , we have found that the chloride-substituted oxidized derivatives of the Lindqvist vanadium-oxide clusters can be formed using TiCl 3 (thf) 3 with [V 6 O 7 (OC 2 H 5 ) 12 ] n ( n = 1−, 0) or WCl 6 with [V 6 O 7 (OC 2 H 5 ) 12 ] 0 . Characterization of the chloride-containing products, [V 6 O 6 Cl(OC 2 H 5 ) 12 ] n ( n = 0, 1+), was accomplished via 1 H NMR spectroscopy, X-ray crystallography, and elemental analysis. Electronic analysis of the redox series of Cl-doped POV-alkoxide clusters via infrared and electronic absorption spectroscopies revealed all redox events are localized to the vanadyl portion of the cluster, with the site differentiated V III –Cl moiety retaining its reduced oxidation state across a 1.9 V window. These results present new synthetic routes for accessing chloride-doped POV-alkoxide clusters from mixed-valent vanadium oxide precursors. 
    more » « less
  2. Anionic dopants, such as O-atom vacancies, alter the thermochemical and kinetic parameters of proton coupled electron transfer (PCET) at metal oxide surfaces; understanding their impact(s) is essential for informed material design for efficient energy conversion processes. To circumvent challenges associated with studying extended solids, we employ polyoxovanadate–alkoxide clusters as atomically precise models of reducible metal oxide surfaces. In this work, we examine net hydrogen atom (H-atom) uptake to an oxygen deficient vanadium oxide assembly, [V 6 O 6 (MeCN)(OCH 3 ) 12 ] 0 . Addition of two H-atom equivalents to [V 6 O 6 (MeCN)(OCH 3 ) 12 ] 0 results in formation of [V 6 O 5 (MeCN)(OH 2 )(OCH 3 ) 12 ] 0 . Assessment of the bond dissociation free energy of the O–H bonds of the resultant aquo moiety reveals that the presence of an O-atom defect weakens the O–H bond strength. Despite a decreased thermodynamic driving force for the reduction of [V 6 O 6 (MeCN)(OCH 3 ) 12 ] 0 , kinetic investigations show the rate of H-atom uptake at the cluster surface is ∼100× faster than its oxidized congener, [V 6 O 7 (OCH 3 ) 12 ] 0 . Electron density derived from the O-atom vacancy is shown to play an important role in influencing H-atom uptake at the cluster surface, lowering activation barriers for H-atom transfer. 
    more » « less
  3. We report the synthesis and characterisation of a series of siloxide-functionalised polyoxovanadate–alkoxide (POV–alkoxide) clusters, [V 6 O 6 (OSiMe 3 )(OMe) 12 ] n ( n = 1−, 2−), that serve as molecular models for proton and hydrogen-atom uptake in vanadium dioxide, respectively. Installation of a siloxide moiety on the surface of the Lindqvist core was accomplished via addition of trimethylsilyl trifluoromethylsulfonate to the fully-oxygenated cluster [V 6 O 7 (OMe) 12 ] 2− . Characterisation of [V 6 O 6 (OSiMe 3 )(OMe) 12 ] 1− by X-ray photoelectron spectroscopy reveals that the incorporation of the siloxide group does not result in charge separation within the hexavanadate assembly, an observation that contrasts directly with the behavior of clusters bearing substitutional dopants. The reduced assembly, [V 6 O 6 (OSiMe 3 )(OMe) 12 ] 2− , provides an isoelectronic model for H-doped VO 2 , with a vanadium( iii ) ion embedded within the cluster core. Notably, structural analysis of [V 6 O 6 (OSiMe 3 )(OMe) 12 ] 2− reveals bond perturbations at the siloxide-functionalised vanadium centre that resemble those invoked upon H-atom uptake in VO 2 through ab initio calculations. Our results offer atomically precise insight into the local structural and electronic consequences of the installation of hydrogen-atom-like dopants in VO 2 , and challenge current perspectives of the operative mechanism of electron–proton co-doping in these materials. 
    more » « less
  4. The solid-state structures of the Na + , Li + , and NH 4 + salts of the 4,5-dihydroxybenzene-1,3-disulfonate (tiron) dianion are reported, namely disodium 4,5-dihydroxybenzene-1,3-disulfonate, 2Na + ·C 6 H 4 O 8 S 2 2− , μ-4,5-dihydroxybenzene-1,3-disulfonato-bis[aqualithium(I)] hemihydrate, [Li 2 (C 6 H 4 O 8 S 2 )(H 2 O) 2 ]·0.5H 2 O, and diammonium 4,5-dihydroxybenzene-1,3-disulfonate monohydrate, 2NH 4 + ·C 6 H 4 O 8 S 2 2− ·H 2 O. Intermolecular interactions vary with the size of the cation, and the asymmetric unit cell, and the macromolecular features are also affected. The sodium in Na 2 (tiron) is coordinated in a distorted octahedral environment through the sulfonate oxygen and hydroxyl oxygen donors on tiron, as well as an interstitial water molecule. Lithium, with its smaller ionic radius, is coordinated in a distorted tetrahedral environment by sulfonic and phenolic O atoms, as well as water in Li 2 (tiron). The surrounding tiron anions coordinating to sodium or lithium in Na 2 (tiron) and Li 2 (tiron), respectively, result in a three-dimensional network held together by the coordinate bonds to the alkali metal cations. The formation of such a three-dimensional network for tiron salts is relatively rare and has not been observed with monovalent cations. Finally, (NH 4 ) 2 (tiron) exhibits extensive hydrogen-bonding arrays between NH 4 + and the surrounding tiron anions and interstitial water molecules. This series of structures may be valuable for understanding charge transfer in a putative solid-state fuel cell utilizing tiron. 
    more » « less
  5. We report a rare example of oxygen atom transfer (OAT) from a polyoxometalate cluster to a series of tertiary phosphanes. Addition of PR 3 (PR 3 = PMe 3 , PMe 2 Ph, PMePh 2 , PPh 3 ) to a neutral methoxide-bridged polyoxovanadate-alkoxide (POV-alkoxide) cluster, [V 6 O 7 (OMe) 12 ] 0 , results in isolation of a reduced structure with phosphine oxide datively coordinated to a site-differentiated V III ion. A positive correlation between the steric and electronic properties of the phosphane and the reaction rate was observed. Further investigation of the steric influence of the alkoxy-bridged clusters on OAT was probed through the use of POV clusters with bridging alkoxide ligands of varying chain length ([V 6 O 7 (OR′) 12 ]; R′ = Et, n Pr). These investigations expose that steric hinderance of the vanadyl moieties has significant influence on the rate of OAT. Finally, we report the reactivity of the reduced POV-alkoxide clusters with styrene oxide, resulting in the deoxygenation of the substrate to generate styrene. This result is the first example of epoxide deoxygenation using homometallic polyoxometalate clusters, demonstrating the potential for mono-vacant Lindqvist clusters to catalyze the removal of oxygen atoms from organic substrates. 
    more » « less