Attention:The NSF Public Access Repository (PAR) system and access will be unavailable from 11:00 PM ET on Thursday, November 12th until 12:00 AM ET on Friday, November 13th due to maintenance. We apologize for the inconvenience.


Title: Design of Peptides that Fold and Self-Assemble on Graphite
The graphite–water interface provides a unique environment for polypeptides that generally favors ordered structures more than in solution. Therefore, systems consisting of designed peptides and graphitic carbon might serve as a convenient medium for controlled self-assembly of functional materials. Here, we computationally designed cyclic peptides that spontaneously fold into a β-sheet-like conformation at the graphite–water interface and self-assemble, and we subsequently observed evidence of such assembly by atomic force microscopy. Using a novel protocol, we screened nearly 2000 sequences, optimizing for formation of a unique folded conformation while discouraging unfolded or misfolded conformations. A head-to-tail cyclic peptide with the sequence GTGSGTGGPGGGCGTGTGSGPG showed the greatest apparent propensity to fold spontaneously and this optimized sequence was selected for larger scale molecular dynamics simulations, rigorous free-energy calculations, and experimental validation. In simulations ranging from hundreds of nanoseconds to a few microseconds, we observed spontaneous folding of this peptide at the graphite–water interface under many different conditions, including multiple temperatures (295 and 370 K), with different initial orientations relative to the graphite surface, and using different molecular dynamics force fields (CHARMM and Amber). The thermodynamic stability of the folded conformation on graphite over a range of temperatures was verified by replica-exchange simulations and free-energy calculations. On the other hand, in free solution, the folded conformation was found to be unstable, unfolding in tens of picoseconds. Intermolecular hydrogen bonds promoted self-assembly of the folded peptides into linear arrangements where the peptide backbone exhibited a tendency to align along one of the six zigzag directions of the graphite basal plane. For the optimized peptide, atomic force microscopy revealed growth of single-molecule-thick linear patterns of sixfold symmetry, consistent with the simulations, while no such patterns were observed for a control peptide with the same amino acid composition but a scrambled sequence.  more » « less
Award ID(s):
1945589
PAR ID:
10342333
Author(s) / Creator(s):
; ; ; ; ; ;
Date Published:
Journal Name:
Journal of Chemical Information and Modeling
ISSN:
1549-9596
Subject(s) / Keyword(s):
Sponsoring Org:
National Science Foundation
More Like this
  1. Cyclic peptides consisting of glycine-X repeats have been shown in simulation and experiment to fold at the graphite–water interface into beta-hairpins, which then self-assemble by intermolecular hydrogen bonding. In this contribution, we investigate the role of the hairpin turn sequence, strand length, and the X amino acid on folding and self-assembly. Simulations of relatively large systems with 9 initially unfolded peptides allow us to observe spontaneous folding, which, together with free energy profiles as a function of RMSD, enable comparison of folding thermodynamics and kinetics among sequences and identification of metastable misfolded conformations. Likewise, spontaneous assembly is also occurs in these simulations, which, together with absolute binding free energy calculations, enable comparison of assembly kinetics and preferences for different intermolecular alignments. We find that the GPGG sequence best enforces folding with the desired hairpin turn compared to GGGG and GDGG sequences. While our previous peptide design was head-to-tail cyclized, here, we demonstrate that disulfide cyclization is a viable alternative. Peptides having with strands with GT, GA, GG, GS, and GD repeats, as well as those with charge-complementary GE/GZ pairs (where Z is diaminobutyric acid), can fold correctly, but vary in their folding free energy, tendency to adopt misfolded conformations, folding cooperativity, and preference for different intermolecular alignments. GT-repeat strands most favor folding into the desired beta-strands; however, they yield the weakest intermolecular assembly. GG-repeats yield the strongest intermolecular assembly, but peptides with all GG repeats show a greater tendency to misfold. GA-repeat strands exhibit strong folding cooperativity --- folding becomes more favorable in the presence of other folded peptides. A peptide with GE repeats on one strand and GZ on the other gives the best assembly fidelity, yielding the most peptides correctly aligned in simulations and an assembly free energy second only to the GG-repeat peptide. 
    more » « less
  2. {"Abstract":["This data set for the manuscript entitled "Design of Peptides that Fold and Self-Assemble on Graphite" includes all files needed to run and analyze the simulations described in the this manuscript in the molecular dynamics software NAMD, as well as the output of the simulations. The files are organized into directories corresponding to the figures of the main text and supporting information. They include molecular model structure files (NAMD psf or Amber prmtop format), force field parameter files (in CHARMM format), initial atomic coordinates (pdb format), NAMD configuration files, Colvars configuration files, NAMD log files, and NAMD output including restart files (in binary NAMD format) and trajectories in dcd format (downsampled to 10 ns per frame). Analysis is controlled by shell scripts (Bash-compatible) that call VMD Tcl scripts or python scripts. These scripts and their output are also included.<\/p>\n\nVersion: 2.0<\/p>\n\nChanges versus version 1.0 are the addition of the free energy of folding, adsorption, and pairing calculations (Sim_Figure-7) and shifting of the figure numbers to accommodate this addition.<\/p>\n\n\nConventions Used in These Files\n===============================<\/p>\n\nStructure Files\n----------------\n- graph_*.psf or sol_*.psf (original NAMD (XPLOR?) format psf file including atom details (type, charge, mass), as well as definitions of bonds, angles, dihedrals, and impropers for each dipeptide.)<\/p>\n\n- graph_*.pdb or sol_*.pdb (initial coordinates before equilibration)\n- repart_*.psf (same as the above psf files, but the masses of non-water hydrogen atoms have been repartitioned by VMD script repartitionMass.tcl)\n- freeTop_*.pdb (same as the above pdb files, but the carbons of the lower graphene layer have been placed at a single z value and marked for restraints in NAMD)\n- amber_*.prmtop (combined topology and parameter files for Amber force field simulations)\n- repart_amber_*.prmtop (same as the above prmtop files, but the masses of non-water hydrogen atoms have been repartitioned by ParmEd)<\/p>\n\nForce Field Parameters\n----------------------\nCHARMM format parameter files:\n- par_all36m_prot.prm (CHARMM36m FF for proteins)\n- par_all36_cgenff_no_nbfix.prm (CGenFF v4.4 for graphene) The NBFIX parameters are commented out since they are only needed for aromatic halogens and we use only the CG2R61 type for graphene.\n- toppar_water_ions_prot_cgenff.str (CHARMM water and ions with NBFIX parameters needed for protein and CGenFF included and others commented out)<\/p>\n\nTemplate NAMD Configuration Files\n---------------------------------\nThese contain the most commonly used simulation parameters. They are called by the other NAMD configuration files (which are in the namd/ subdirectory):\n- template_min.namd (minimization)\n- template_eq.namd (NPT equilibration with lower graphene fixed)\n- template_abf.namd (for adaptive biasing force)<\/p>\n\nMinimization\n-------------\n- namd/min_*.0.namd<\/p>\n\nEquilibration\n-------------\n- namd/eq_*.0.namd<\/p>\n\nAdaptive biasing force calculations\n-----------------------------------\n- namd/eabfZRest7_graph_chp1404.0.namd\n- namd/eabfZRest7_graph_chp1404.1.namd (continuation of eabfZRest7_graph_chp1404.0.namd)<\/p>\n\nLog Files\n---------\nFor each NAMD configuration file given in the last two sections, there is a log file with the same prefix, which gives the text output of NAMD. For instance, the output of namd/eabfZRest7_graph_chp1404.0.namd is eabfZRest7_graph_chp1404.0.log.<\/p>\n\nSimulation Output\n-----------------\nThe simulation output files (which match the names of the NAMD configuration files) are in the output/ directory. Files with the extensions .coor, .vel, and .xsc are coordinates in NAMD binary format, velocities in NAMD binary format, and extended system information (including cell size) in text format. Files with the extension .dcd give the trajectory of the atomic coorinates over time (and also include system cell information). Due to storage limitations, large DCD files have been omitted or replaced with new DCD files having the prefix stride50_ including only every 50 frames. The time between frames in these files is 50 * 50000 steps/frame * 4 fs/step = 10 ns. The system cell trajectory is also included for the NPT runs are output/eq_*.xst.<\/p>\n\nScripts\n-------\nFiles with the .sh extension can be found throughout. These usually provide the highest level control for submission of simulations and analysis. Look to these as a guide to what is happening. If there are scripts with step1_*.sh and step2_*.sh, they are intended to be run in order, with step1_*.sh first.<\/p>\n\n\nCONTENTS\n========<\/p>\n\nThe directory contents are as follows. The directories Sim_Figure-1 and Sim_Figure-8 include README.txt files that describe the files and naming conventions used throughout this data set.<\/p>\n\nSim_Figure-1: Simulations of N-acetylated C-amidated amino acids (Ac-X-NHMe) at the graphite\u2013water interface.<\/p>\n\nSim_Figure-2: Simulations of different peptide designs (including acyclic, disulfide cyclized, and N-to-C cyclized) at the graphite\u2013water interface.<\/p>\n\nSim_Figure-3: MM-GBSA calculations of different peptide sequences for a folded conformation and 5 misfolded/unfolded conformations.<\/p>\n\nSim_Figure-4: Simulation of four peptide molecules with the sequence cyc(GTGSGTG-GPGG-GCGTGTG-SGPG) at the graphite\u2013water interface at 370 K.<\/p>\n\nSim_Figure-5: Simulation of four peptide molecules with the sequence cyc(GTGSGTG-GPGG-GCGTGTG-SGPG) at the graphite\u2013water interface at 295 K.<\/p>\n\nSim_Figure-5_replica: Temperature replica exchange molecular dynamics simulations for the peptide cyc(GTGSGTG-GPGG-GCGTGTG-SGPG) with 20 replicas for temperatures from 295 to 454 K.<\/p>\n\nSim_Figure-6: Simulation of the peptide molecule cyc(GTGSGTG-GPGG-GCGTGTG-SGPG) in free solution (no graphite).<\/p>\n\nSim_Figure-7: Free energy calculations for folding, adsorption, and pairing for the peptide CHP1404 (sequence: cyc(GTGSGTG-GPGG-GCGTGTG-SGPG)). For folding, we calculate the PMF as function of RMSD by replica-exchange umbrella sampling (in the subdirectory Folding_CHP1404_Graphene/). We make the same calculation in solution, which required 3 seperate replica-exchange umbrella sampling calculations (in the subdirectory Folding_CHP1404_Solution/). Both PMF of RMSD calculations for the scrambled peptide are in Folding_scram1404/. For adsorption, calculation of the PMF for the orientational restraints and the calculation of the PMF along z (the distance between the graphene sheet and the center of mass of the peptide) are in Adsorption_CHP1404/ and Adsorption_scram1404/. The actual calculation of the free energy is done by a shell script ("doRestraintEnergyError.sh") in the 1_free_energy/ subsubdirectory. Processing of the PMFs must be done first in the 0_pmf/ subsubdirectory. Finally, files for free energy calculations of pair formation for CHP1404 are found in the Pair/ subdirectory.<\/p>\n\nSim_Figure-8: Simulation of four peptide molecules with the sequence cyc(GTGSGTG-GPGG-GCGTGTG-SGPG) where the peptides are far above the graphene\u2013water interface in the initial configuration.<\/p>\n\nSim_Figure-9: Two replicates of a simulation of nine peptide molecules with the sequence cyc(GTGSGTG-GPGG-GCGTGTG-SGPG) at the graphite\u2013water interface at 370 K.<\/p>\n\nSim_Figure-9_scrambled: Two replicates of a simulation of nine peptide molecules with the control sequence cyc(GGTPTTGGGGGGSGGPSGTGGC) at the graphite\u2013water interface at 370 K.<\/p>\n\nSim_Figure-10: Adaptive biasing for calculation of the free energy of the folded peptide as a function of the angle between its long axis and the zigzag directions of the underlying graphene sheet.<\/p>\n\n <\/p>"],"Other":["This material is based upon work supported by the US National Science Foundation under grant no. DMR-1945589. A majority of the computing for this project was performed on the Beocat Research Cluster at Kansas State University, which is funded in part by NSF grants CHE-1726332, CNS-1006860, EPS-1006860, and EPS-0919443. This work used the Extreme Science and Engineering Discovery Environment (XSEDE), which is supported by National Science Foundation grant number ACI-1548562, through allocation BIO200030."]} 
    more » « less
  3. Yooseph, Shibu (Ed.)
    Abstract Screening amino acid sequence space via experiments to discover peptides that self-assemble into amyloid fibrils is challenging. We have developed a computational peptide assembly design (PepAD) algorithm that enables the discovery of amyloid-forming peptides. Discontinuous molecular dynamics (DMD) simulation with the PRIME20 force field combined with the FoldAmyloid tool is used to examine the fibrilization kinetics of PepAD-generated peptides. PepAD screening of ∼10,000 7-mer peptides resulted in twelve top-scoring peptides with two distinct hydration properties. Our studies revealed that eight of the twelve in silico discovered peptides spontaneously form amyloid fibrils in the DMD simulations and that all eight have at least five residues that the FoldAmyloid tool classifies as being aggregation-prone. Based on these observations, we re-examined the PepAD-generated peptides in the sequence pool returned by PepAD and extracted five sequence patterns as well as associated sequence signatures for the 7-mer amyloid-forming peptides. Experimental results from Fourier transform infrared spectroscopy (FTIR), thioflavin T (ThT) fluorescence, circular dichroism (CD), and transmission electron microscopy (TEM) indicate that all the peptides predicted to assemble in silico assemble into antiparallel β-sheet nanofibers in a concentration-dependent manner. This is the first attempt to use a computational approach to search for amyloid-forming peptides based on customized settings. Our efforts facilitate the identification of β-sheet-based self-assembling peptides, and contribute insights towards answering a fundamental scientific question: “What does it take, sequence-wise, for a peptide to self-assemble?” 
    more » « less
  4. Abstract Amphipathic peptides can self-assemble into β-sheet-rich fibrils and hydrogels. The potential applications of these nanomaterials in biomedicine, drug delivery, and tissue engineering have sparked significant research. Current computational screens for amphipathic peptides heavily rely on coarse-grained molecular dynamics (CGMD) simulations using the Martini force field to ascertain the self-assembly potential of novel peptide sequences. This approach, however, showed limited success in self-assembling amphipathic peptides into experimentally observed β-sheet-rich hydrogels. We have systematically investigated this phenomenon using FKFEFKFE, an amphipathic octapeptide with a solved high-resolution self-assembled three-dimensional (3D) structure, as our model system. We first performed all-atom molecular dynamics (AAMD) simulations, which support the essential role of neutral capping groups in reproducing the cryogenic electron microscopy (Cryo-EM) structure. Accordingly, CGMD simulations were conducted to compare the efficacy of the Martini versions 2.1, 2.2, 2.2P, and 3. Surprisingly, Martini 2.1 was the best at maintaining the self-assembled bilayer structure of the peptide observed in Cryo-EM. The self-assembly of 20 mM FKFEFKFE peptides from a random initial arrangement was then examined via 5 μs CGMD simulations, further confirming that Martini 2.1 can successfully simulate the formation of a β-sheet-rich bilayer with phenylalanine side chains embedded between the two layers. Moreover, modifications to the Martini 3 potential and the use of small water models, which were promising for shorter-peptide self-assembly, have limited success. We further showed that configurational entropy performs better at characterizing the assembly of ordered structures than the routinely used aggregation propensity score. Though the FKFEFKFE peptide was exclusively examined, the comprehensive benchmarking conducted here provides valuable insights into the factors influencing the CGMD of peptide self-assembly. Overall, the results support the development of robust, reproducible CGMD protocols and analysis tools for studying self-assembling peptides, enabling the discovery of novel supramolecular structures and biomaterials. 
    more » « less
  5. Ordered nanoscale patterns have been observed by atomic force microscopy at graphene–water and graphite–water interfaces. The two dominant explanations for these patterns are that (i) they consist of self-assembled organic contaminants or (ii) they are dense layers formed from atmospheric gases (especially nitrogen). Here we apply molecular dynamics simulations to study the behavior of dinitrogen and possible organic contaminants at the graphene–water interface. Despite the high concentration of N 2 in ambient air, we find that its expected occupancy at the graphene–water interface is quite low. Although dense (disordered) aggregates of dinitrogen have been observed in previous simulations, our results suggest that they are stable only in the presence of supersaturated aqueous N 2 solutions and dissipate rapidly when they coexist with nitrogen gas near atmospheric pressure. On the other hand, although heavy alkanes are present at only trace concentrations (micrograms per cubic meter) in typical indoor air, we predict that such concentrations can be sufficient to form ordered monolayers that cover the graphene–water interface. For octadecane, grand canonical Monte Carlo suggests nucleation and growth of monolayers above an ambient concentration near 6 μg m −3 , which is less than some literature values for indoor air. The thermodynamics of the formation of these alkane monolayers includes contributions from the hydration free-energy (unfavorable), the free-energy of adsorption to the graphene–water interface (highly favorable), and integration into the alkane monolayer phase (highly favorable). Furthermore, the peak-to-peak distances in AFM force profiles perpendicular to the interface (0.43–0.53 nm), agree with the distances calculated in simulations for overlayers of alkane-like molecules, but not for molecules such as N 2 , water, or aromatics. Taken together, these results suggest that ordered domains observed on graphene, graphite, and other hydrophobic materials in water are consistent with alkane-like molecules occupying the interface. 
    more » « less