Fullertubes, that is, fullerenes consisting of a carbon nanotube moiety capped by hemifullerene ends, are emerging carbon nanomaterials whose properties show both fullerene and carbon nanotube (CNT) traits. Albeit it may be expected that their electronic states show a certain resemblance to those of the extended nanotube, such a correlation has not yet been found or described. Here it shows a scanning tunneling microscopy (STM) and spectroscopy (STS) characterization of the adsorption, self‐assembly, and electronic structure of 2D arrays of [5,5]‐C90fullertube molecules on two different noble metal surfaces, Ag(111) and Au(111). The results demonstrate that the shape of the molecular orbitals of the adsorbed fullertubes corresponds closely to those expected for isolated species on the grounds of density functional theory calculations. Moreover, a comparison between the electronic density profiles in the bands of the extended [5,5]‐CNT and in the molecules reveals that some of the frontier orbitals of the fullertube molecules can be described as the result of the quantum confinement imposed by the hemifullerene caps to the delocalized band states in the extended CNT. The results thus provide a conceptual framework for the rational design of custom fullertube molecules and can potentially become a cornerstone in the understanding of these new carbon nanoforms.
Vibrational anatomy of C90, C96, and C100 fullertubes: probing Frankenstein's skeletal structures of fullerene head endcaps and nanotube belt midsection
Fullertubes are tubular fullerenes with nanotube-like middle section and fullerene-like endcaps. To understand how this intermediate form between spherical fullerenes and nanotubes is reflected in the vibrational modes, we performed comprehensive studies of IR and Raman spectra of fullertubes C90-D5h, C96-D3d, and C100-D5d. An excellent agreement between experimental and DFT-computed spectra enabled a detailed vibrational assignment and allowed an analysis of the localization degree of the vibrational modes in different parts of fullertubes. Projection analysis was performed to establish an exact numerical correspondence between vibrations of the belt midsection and fullerene headcaps to the modes of nanotubes and fullerene C60-Ih. As a result, we could not only identify fullerene-like and CNT-like vibrations of fullertubes, but also trace their origin in specific vibrational modes of CNT and C60-Ih. IR spectra were found to be dominated by vibrations of fullerene-like caps resembling IR-active modes of C60-Ih, whereas in Raman spectra both caps and belt vibrations are found to be equally active. Unlike the resonance Raman spectra of CNTs, in which only two single-phonon bands are detected, the Raman spectra of fullertubes exhibit several CNT-like vibrations and thus provide additional information on nanotube phonons.
more »
« less
- Award ID(s):
- 1856461
- NSF-PAR ID:
- 10342701
- Date Published:
- Journal Name:
- Nanoscale
- ISSN:
- 2040-3364
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
null (Ed.)We describe a novel variant of the driven molecular dynamics (DMD) method derived for probing Raman active vibrations. The method is an extension of the conventional alpha-DMD formulation for simulating IR activity by means of coupling an oscillating electric field to the molecule’s dipole moment, miu, and inducing absorption of energy via tuning the field to a resonant frequency. In the present work, we modify the above prescription to invoke Raman activity by coupling two electric fields, i.e., a “Pump” photon of frequency wP and a Stokes photon of frequency wS to the molecule’s polarizability tensor, alpha, with the difference in the frequencies of the two photons w = wP - wS corresponding to the Stokes Raman shift. If a particular w is close to a Raman active vibrational frequency, energy absorption by the molecule ensues. Varying w over the desired frequency range allows identifying and assigning all Raman active vibrational modes, including anharmonic corrections, in the range by means of trajectory analysis. We show that only one element of the full polarizability tensor, and its nuclear derivative, is needed for an alpha-DMD trajectory, making this method well suited for ab initio dynamics implementation. Numerical results using first-principles calculations are presented and discussed for the vibrational fundamentals, combination bands, overtones of H2O, CH4, and the C20 fullerene.more » « less
-
We report the first experimental characterization of isomerically pure and pristine C120 fullertubes, [5,5] C120-D5d(1) and [10,0] C120-D5h(10766). These new molecules represent the highest aspect ratio fullertubes isolated to date; for example, the prior largest empty cage fullertube was [5,5] C100-D5d(1). This increase of 20 carbon atoms represents a gigantic leap in comparison to three decades of C60–C90 fullerene research. Moreover, the [10,0] C120-D5d(10766) fullertube has an end-cap derived from C80-Ih and is a new fullertube whose C40 end-cap has not yet been isolated experimentally. Theoretical and experimental analyses of anisotropic polarizability and UV–vis assign C120 isomer I as a [5,5] C120-D5d(1) fullertube. C120 isomer II matches a [10,0] C120-D5h(10766) fullertube. These structural assignments are further supported by Raman data showing metallic character for [5,5] C120-D5d(1) and nonmetallic character for C120-D5h(10766). STM imaging reveals a tubular structure with an aspect ratio consistent with a [5,5] C120-D5d(1) fullertube. With microgram quantities not amenable to crystallography, we demonstrate that DFT anisotropic polarizability, augmented by long-accepted experimental analyses (HPLC retention time, UV–vis, Raman, and STM) can be synergistically used (with DFT) to down select, predict, and assign C120 fullertube candidate structures. From 10 774 mathematically possible IPR C120 structures, this anisotropic polarizability paradigm is quite favorable to distinguish tubular structures from carbon soot. Identification of isomers I and II was surprisingly facile, i.e., two purified isomers for two possible structures of widely distinguishing features. These metallic and nonmetallic C120 fullertube isomers open the door to both fundamental research and application development.more » « less
-
We report the seminal experimental isolation and DFT characterization of pristine [5,5] C130-D5h(1) fullertubes. This achievement represents the largest soluble carbon molecule obtained in pristine form. The [5,5] C130 species is the highest aspect ratio fullertube purified to date and now surpasses the recent gigantic [5,5] C120-D5d(1). In contrast to C90, C100, and C120 fullertubes, the longer C130-D5h has more nanotubular carbons (70) than end-cap fullerenyl atoms (60). Starting from 39,393 possible C130 isolated pentagon rule (IPR) structures and after analyzing polarizability, retention time, and UV-vis spectra, these three layers of data remarkably predict a single candidate isomer and fullertube, [5,5] C130-D5h(1). This structural assignment is augmented by atomic resolution STEM data showing distinctive and tubular “pill-like” structures with diameters and aspect ratios consistent with [5,5] C130-D5h(1) fullertubes. The high selectivity of the aminopropanol reaction with spheroidal fullerenes permits a facile separation and removal of fullertubes from soot extracts. Experimental analyses (HPLC retention time, UV-vis, and STEM) were synergistically used (with polarizability and DFT property calculations) to down select and confirm the C130 fullertube structure. Achieving the isolation of a new [5,5] C130-D5h fullertube opens the door to application development and fundamental studies of electron confinement, fluorescence, and metallic character for a fullertube series of molecules with systematic tubular elongation. This [5,5] fullertube family also invites comparative studies with single-walled carbon nanotubes (SWCNTs), nanohorns (SWCNHs), and fullerenes.more » « less
-
more » « less
Abstract Infrared (IR) thermal imaging is receiving a great deal of attention due to its wide range of applications. Given multiple issues (like cost and availability) with the inorganic materials currently exploited for IR imaging, there is nowadays a great push of developing organic imaging materials. Carbon‐based materials are known to have significant transparency in the visible and IR regions and some are used as transparent conductors. Here, whether π‐conjugated carbon‐based materials are suitable for long‐wave (LW) and mid‐wave (MW) IR imaging applications is computationally assessed. Using density functional theory calculations, the IR‐vibrational properties of molecules from acenes to coronenes and fullerenes, and of periodic systems like graphene and carbon nanotubes are characterized. Fullerenes, graphenes, and double‐walled carbon nanotubes are found to be very attractive as they are transparent in both the LWIR and MWIR regions, a feature resulting from the absence of hydrogen atoms. Also, it is found that replacing hydrogen atoms in a molecule with deuterium or sulfur atoms can be an efficient way to improve their LWIR or MWIR transparency, respectively. For fused‐ring systems having hydrogen atoms on the periphery, designing molecules with trio CH‐units is another way to enhance the transparency in the LWIR region.
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/d2nr01870e
