We introduce and experimentally demonstrate a miniaturized integrated spectrometer operating over a broad bandwidth in the short-wavelength infrared (SWIR) spectrum that combines an add-drop ring resonator narrow band filter with a distributed Bragg reflector (DBR) based broadband filter realized in a silicon photonic platform. The contra-directional coupling DBR filter in this design consists of a pair of waveguide sidewall gratings that act as a broadband filter (i.e., 3.9 nm). The re-directed beam is then fed into the ring resonator which functions as a narrowband filter (i.e., 0.121 nm). In this scheme the free spectral range (FSR) limitation of the ring resonator is overcome by using the DBR as a filter to isolate a single ring resonance line. The overall design of the spectrometer is further simplified by simultaneously tuning both components through the thermo-optic effect. Moreover, several ring-grating spectrometer cells with different central wavelengths can be stacked in cascade in order to cover a broader spectrum bandwidth. This can be done by centering each unit cell on a different center wavelength such that the maximum range of one-unit cell corresponds to the minimum range of the next unit cell. This configuration enables high spectral resolution over a large spectral bandwidth and high extinction ratio (ER), making it suitable for a wide variety of applications.
- Award ID(s):
- 1932753
- NSF-PAR ID:
- 10346764
- Editor(s):
- Jelena Vuckovic
- Date Published:
- Journal Name:
- ACS photonics
- ISSN:
- 2330-4022
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
-
more » « less
Abstract We present an ultra-compact single-shot spectrometer on silicon platform for sparse spectrum reconstruction. It consists of 32 stratified waveguide filters (SWFs) with diverse transmission spectra for sampling the unknown spectrum of the input signal and a specially designed ultra-compact structure for splitting the incident signal into those 32 filters with low power imbalance. Each SWF has a footprint less than 1 µm × 30 µm, while the 1 × 32 splitter and 32 filters in total occupy an area of about 35 µm × 260 µm, which to the best of our knowledge, is the smallest footprint spectrometer realized on silicon photonic platform. Experimental characteristics of the fabricated spectrometer demonstrate a broad operating bandwidth of 180 nm centered at 1550 nm and narrowband peaks with 0.45 nm Full-Width-Half-Maximum (FWHM) can be clearly resolved. This concept can also be implemented using other material platforms for operation in optical spectral bands of interest for various applications.
-
more » « less
Grating coupler devices provide efficient, foundry-compatible vertical fiber-to-chip coupling solutions in integrated photonic platforms. However, standard grating coupler designs are highly polarization sensitive, which hinders their adoption. We present a new, to the best of our knowledge, type of 1D polarization-insensitive grating coupler (PIGC) that is based on a zero-birefringence subwavelength “corelet” waveguide. We demonstrate a PIGC for coupling in the telecommunications O-band in a 45-nm-node monolithic silicon-on-insulator (SOI) CMOS electronic-photonic platform, with measured insertion losses of 6.7 and 6.1 dB to transverse electric and transverse magnetic polarizations, respectively, and a ±1-dB polarization dependent loss bandwidth of 73 nm.
-
This article provides a broadband dielectric characterization of different silicate substrates up to 115 GHz, to fill the gap in the properties of different kinds of glasses in a broad part of the mm-wave spectrum. Both the internal structure (crystalline or amorphous) and the chemistry of the substrates influence the permittivity and loss tangent of the material. Quartz and sapphire are crystalline materials that exhibit a low loss in the mm-wave frequency range. Amorphous silicates generally have higher loss values than crystalline materials, and within the glasses, the level of impurities added also affects the dielectric loss. Several characterization techniques have been employed to cover a broad frequency band. The limitations of the different characterization techniques are also included. Once the dielectric properties of substrates are characterized, a metasurface has been designed and fabricated at 100 GHz to increase the reflection in window glass and provide coverage on areas that would otherwise be shadowed. The measurement results are in good agreement with the simulations.more » « less
-
more » « less
Abstract Surface‐enhanced Raman spectroscopy (SERS) has become a sensitive detection technique for biochemical analysis. Despite significant research efforts, most SERS substrates consisting of single‐resonant plasmonic nanostructures on the planar surface suffer from limitations of narrowband SERS operation and unoptimized nano‐bio interface with living cells. Here, it is reported that nanolaminate plasmonic nanocavities on 3D vertical nanopillar arrays can support a broadband SERS operation with large enhancement factors (>106) under laser excitations at 532, 633, and 785 nm. The multi‐band Raman mapping measurements show that nanolaminate plasmonic nanocavities on vertical nanopillar arrays exhibit broadband uniform SERS performance with diffraction‐limited resolution at a single nanopillar footprint. By selective exposure of embedded plasmonic hotspots in individual metal–insulator–metal (MIM) nanogaps, nanoscale broadband SERS operation at the single MIM nanocavity level with visible and near‐infrared (vis–NIR) excitations is demonstrated. Numerical studies reveal that nanolaminate plasmonic nanocavities on vertical nanopillars can support multiple hybridized plasmonic modes to concentrate optical fields across a broadband wavelength range from 500 to 900 nm at the nanoscale.
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/0000-0002-9181-4266
