skip to main content


Title: Three-dimensional Gauss–Newton constant- Q viscoelastic full-waveform inversion of near-surface seismic wavefields
SUMMARY

Full-waveform inversion (FWI) methods rely on accurate numerical simulation of wave propagation in the analysed medium. Acoustic or elastic wave equations are often used to model seismic wave propagation. These types of simulations do not account for intrinsic attenuation effects due to material anelasticity, and thus correction techniques have been utilized in practice to partially compensate the anelasticity. These techniques often only consider the waveform amplitude correction based on averaging of overall amplitude response over the entire data set, and ignore the phase correction. Viscoelastic wave equations account for the anelastic response in both waveform amplitude and phase, and are therefore a more suitable alternative. In this study, we present a novel 3-D Gauss–Newton viscoelastic FWI (3-D GN-VFWI) method. To address the main challenge of the Gauss–Newton optimization, we develop formulas to compute the Jacobian efficiently by the convolution of virtual sources and backward wavefields. The virtual sources are obtained by directly differentiating the viscoelastic wave equations with respect to model parameters. In order to resolve complex 3-D structures with reasonable computational effort, a homogeneous attenuation (Q factor) is used throughout the analysis to model the anelastic effects. Synthetic and field experiments are performed to demonstrate the utility of the method. The synthetic results clearly demonstrate the ability of the method in characterizing a challenging velocity profile, including voids and reverse velocity layers. The field experimental results show that method successfully characterizes the complex substructure with two voids and undulating limestone bedrock, which are confirmed by invasive tests. Compared to 3-D elastic FWI results, the presented viscoelastic method produces more accurate results regarding depths of the voids and bedrock. This study suggests that the improvement of imaging accuracy would warrant the widespread use of viscoelastic wave equations in FWI problems. To our best knowledge, this is the first reported study on 3-D GN-VFWI at any scale. This study provides the new theory and formulation for the use of Gauss–Newton optimization on the 3-D viscoelastic problem.

 
more » « less
Award ID(s):
1930697
NSF-PAR ID:
10370627
Author(s) / Creator(s):
; ;
Publisher / Repository:
Oxford University Press
Date Published:
Journal Name:
Geophysical Journal International
Volume:
231
Issue:
3
ISSN:
0956-540X
Page Range / eLocation ID:
p. 1767-1785
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Sinkhole collapse may result in significant property damage and even loss of life. Early detection of sinkhole attributes (buried voids, raveling zones) is critical to limit the cost of remediation. One of the most promising ways to obtain subsurface imaging is 3D seismic full-waveform inversion. For demonstration, a recently developed 3D Gauss-Newton full-waveform inversion (3D GN-FWI) method is used to detect buried voids, raveling soils, and characterize variable subsurface soil/rock layering. It is based on a finite-difference solution of 3D elastic wave equations and Gauss-Newton optimization. The method is tested first on a data set constructed from the numerical simulation of a challenging synthetic model and subsequently on field data collected from two separate test sites in Florida. For the field tests, receivers and sources are placed in uniform 2D surface grids to acquire the seismic wavefields, which then are inverted to extract the 3D subsurface velocity structures. The inverted synthetic results suggest that the approach is viable for detecting voids and characterizing layering. The field seismic results reveal that the 3D waveform analysis identified a known manmade void (plastic culvert), unknown natural voids, raveling, as well as laterally variable soil/rock layering including rock pinnacles. The results are confirmed later by standard penetration tests, including depth to bedrock, two buried voids, and a raveling soil zone. Our study provides insight into the application of the 3D seismic FWI technique as a powerful tool in detecting shallow voids and other localized subsurface features. 
    more » « less
  2. SUMMARY

    Improving the resolution of seismic anelastic models is critical for a better understanding of the Earth’s subsurface structure and dynamics. Seismic attenuation plays a crucial role in estimating water content, partial melting and temperature variations in the Earth’s crust and mantle. However, compared to seismic wave-speed models, seismic attenuation tomography models tend to be less resolved. This is due to the complexity of amplitude measurements and the challenge of isolating the effect of attenuation in the data from other parameters. Physical dispersion caused by attenuation also affects seismic wave speeds, and neglecting scattering/defocusing effects in classical anelastic models can lead to biased results. To overcome these challenges, it is essential to account for the full 3-D complexity of seismic wave propagation. Although various synthetic tests have been conducted to validate anelastic full-waveform inversion (FWI), there is still a lack of understanding regarding the trade-off between elastic and anelastic parameters, as well as the variable influence of different parameter classes on the data. In this context, we present a synthetic study to explore different strategies for global anelastic inversions.

    To assess the resolution and sensitivity for different misfit functions, we first perform mono-parameter inversions by inverting only for attenuation. Then, to study trade-offs between parameters and resolution, we test two different inversion strategies (simultaneous and sequential) to jointly constrain the elastic and anelastic parameters. We found that a sequential inversion strategy performs better for imaging attenuation than a simultaneous inversion. We also demonstrate the dominance of seismic wave speeds over attenuation, underscoring the importance of determining a good approximation of the Hessian matrix and suitable damping factors for each parameter class.

     
    more » « less
  3. Abstract

    To complement velocity distributions, seismic attenuation provides additional important information on fluid properties of hydrocarbon reservoirs in exploration seismology, as well as temperature distributions, partial melting, and water content within the crust and mantle in earthquake seismology. Full waveform inversion (FWI), as one of the state‐of‐the‐art seismic imaging techniques, can produce high‐resolution constraints for subsurface (an)elastic parameters by minimizing the difference between observed and predicted seismograms. Traditional waveform inversion for attenuation is commonly based on the standard‐linear‐solid (SLS) wave equation, in which case the quality factor (Q) has to be converted to stress and strain relaxation times. When using multiple attenuation mechanisms in the SLS method, it is difficult to directly estimate these relaxation time parameters. Based on a time domain complex‐valued viscoacoustic wave equation, we present an FWI framework for simultaneously estimating subsurfacePwave velocity and attenuation distributions. BecauseQis explicitly incorporated into the viscoacoustic wave equation, we directly derivePwave velocity andQsensitivity kernels using the adjoint‐state method and simultaneously estimate their subsurface distributions. By analyzing the Gauss‐Newton Hessian, we observe strong interparameter crosstalk, especially the leakage from velocity toQ. We approximate the Hessian inverse using a preconditioned L‐BFGS method in viscoacoustic FWI, which enables us to successfully reduce interparameter crosstalk and produce accurate velocity and attenuation models. Numerical examples demonstrate the feasibility and robustness of the proposed method for simultaneously mapping complex velocity andQdistributions in the subsurface.

     
    more » « less
  4. We have formulated the Fréchet kernel computation using the adjoint-state method based on a fractional viscoacoustic wave equation. We first numerically prove that the 1/2- and the 3/2-order fractional Laplacian operators are self-adjoint. Using this property, we find that the adjoint wave propagator preserves the dispersion and compensates the amplitude, whereas the time-reversed adjoint wave propagator behaves identically to the forward propagator with the same dispersion and dissipation characters. Without introducing rheological mechanisms, this formulation adopts an explicit [Formula: see text] parameterization, which avoids the implicit [Formula: see text] in the conventional viscoacoustic/viscoelastic full-waveform inversion ([Formula: see text]-FWI). In addition, because of the decoupling of operators in the wave equation, the viscoacoustic Fréchet kernel is separated into three distinct contributions with clear physical meanings: lossless propagation, dispersion, and dissipation. We find that the lossless propagation kernel dominates the velocity kernel, whereas the dissipation kernel dominates the attenuation kernel over the dispersion kernel. After validating the Fréchet kernels using the finite-difference method, we conduct a numerical example to demonstrate the capability of the kernels to characterize the velocity and attenuation anomalies. The kernels of different misfit measurements are presented to investigate their different sensitivities. Our results suggest that, rather than the traveltime, the amplitude and the waveform kernels are more suitable to capture attenuation anomalies. These kernels lay the foundation for the multiparameter inversion with the fractional formulation, and the decoupled nature of them promotes our understanding of the significance of different physical processes in [Formula: see text]-FWI. 
    more » « less
  5. SUMMARY

    The spectral element method is currently the method of choice for computing accurate synthetic seismic wavefields in realistic 3-D earth models at the global scale. However, it requires significantly more computational time, compared to normal mode-based approximate methods. Source stacking, whereby multiple earthquake sources are aligned on their origin time and simultaneously triggered, can reduce the computational costs by several orders of magnitude. We present the results of synthetic tests performed on a realistic radially anisotropic 3-D model, slightly modified from model SEMUCB-WM1 with three component synthetic waveform ‘data’ for a duration of 10 000 s, and filtered at periods longer than 60 s, for a set of 273 events and 515 stations. We consider two definitions of the misfit function, one based on the stacked records at individual stations and another based on station-pair cross-correlations of the stacked records. The inverse step is performed using a Gauss–Newton approach where the gradient and Hessian are computed using normal mode perturbation theory. We investigate the retrieval of radially anisotropic long wavelength structure in the upper mantle in the depth range 100–800 km, after fixing the crust and uppermost mantle structure constrained by fundamental mode Love and Rayleigh wave dispersion data. The results show good performance using both definitions of the misfit function, even in the presence of realistic noise, with degraded amplitudes of lateral variations in the anisotropic parameter ξ. Interestingly, we show that we can retrieve the long wavelength structure in the upper mantle, when considering one or the other of three portions of the cross-correlation time series, corresponding to where we expect the energy from surface wave overtone, fundamental mode or a mixture of the two to be dominant, respectively. We also considered the issue of missing data, by randomly removing a successively larger proportion of the available synthetic data. We replace the missing data by synthetics computed in the current 3-D model using normal mode perturbation theory. The inversion results degrade with the proportion of missing data, especially for ξ, and we find that a data availability of 45 per cent or more leads to acceptable results. We also present a strategy for grouping events and stations to minimize the number of missing data in each group. This leads to an increased number of computations but can be significantly more efficient than conventional single-event-at-a-time inversion. We apply the grouping strategy to a real picking scenario, and show promising resolution capability despite the use of fewer waveforms and uneven ray path distribution. Source stacking approach can be used to rapidly obtain a starting 3-D model for more conventional full-waveform inversion at higher resolution, and to investigate assumptions made in the inversion, such as trade-offs between isotropic, anisotropic or anelastic structure, different model parametrizations or how crustal structure is accounted for.

     
    more » « less