skip to main content

Title: Experimental Investigation of Fluid-Structure Interaction in Mach 2 Flow Using Simultaneous High-Speed PIV and DIC
The fluid-structure interaction (FSI) of a compliant panel under a compression-ramp-induced shock/boundary-layer interaction (SBLI) has been studied in Mach 2 flow. Simultaneous high-speed measurements of the velocity field and the panel displacement were conducted using 50 kHz particle image velocimetry (PIV) and 5 kHz stereoscopic digital image correlation (DIC). The mean effect of the panel displacement has been evaluated by monitoring the change in velocity profiles along the streamwise direction (x), upstream of the separated flow region. Streamwise (u) velocity near the panel surface has been shown to change its magnitude in response to the wall shape. Furthermore, the strong cross-correlation between fluctuations of the wall-normal panel displacement and the transverse (v) velocity can be explained by the flow remaining tangent to the wall surface as the panel deforms. This latter result is consistent with the panel motion being sufficiently low frequency compared to flow convective time scales that the flow is quasi-steady In addition, assessment of the correlation between the separation shock position and panel displacement seems to suggest that when the panel is bulged down (concave up) at the downstream end of the panel, a larger separated flow is generated and the shock moves upstream. This observation remains speculative, but is consistent with the flow undergoing greater compression for the bulged down case.  more » « less
Award ID(s):
Author(s) / Creator(s):
; ; ; ; ;
Date Published:
Journal Name:
20th International Symposium on Application of Laser and Imaging Techniques to Fluid Mechanics
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. This experimental study focuses on fluid-structure interaction (FSI) for a thin compliant panel under a shock/boundary layer interaction (SBLI) generated by a 2D compression ramp in a Mach 2 wind tunnel. In previous work, we have studied the FSI for this configuration using simultaneous fast-response pressure-sensitive paint (PSP) and digital image correlation (DIC). Simultaneous PSP/DIC allows for examination of the relationship between the dynamic panel displacement and surface pressure loading, respectively. Spectral analysis showed that pressure fluctuations within the interaction region and shock-foot unsteadiness tend to lock to the first mode resonant frequency of the compliant panel. The current study aims to utilize synchronous high-speed stereoscopic PIV (25 kHz) and DIC (5 kHz) techniques to better understand the coupling between the flow field and the panel displacement field. The PIV is obtained in a streamwise-spanwise plane located at 15% of the boundary layer height. Thin compliant polycarbonate panel with thicknesses of 1 mm is utilized, which has a first-mode vibrational frequency of 407 Hz. The 1 mm panel out-of-plane displacement amplitude was up to 15% of the boundary layer thickness. The analysis includes low-pass and band-pass filtering of the velocity data, including the surrogate separation line, and cross-correlation analysis between panel displacement and velocity. The results indicate a clear coupling of the panel motion and velocity field, but the spectral analysis suffers from limited time records associated with the pulse-burst laser used for PIV. Future work will focus on collecting more data to improve the statistical convergence of the results. 
    more » « less
  2. A thin compliant panel was tested in a Mach 2 wind tunnel. The panel was mounted flush with the tunnel floor and was of dimensions L=121.9 mm (chord), W=63.5 mm (span) and h=0.254 mm (thickness). A 20 degree compression ramp was placed 5 mm downstream of the model, which induced a shock/boundary layer interaction with fully separated flow over parts of the panel. Full-field deformation was measured using Digital Image Correlation and the surface pressure field was obtained from fast-response pressure-sensitive paint. Analysis of the shock foot motion was performed using a curve-fitting method. Comparison of the shock motion between a rigid and compliant panel case showed no difference in the size of the intermittent region but found that the shock motion over the compliant panel is affected by the panel vibration. Proper Orthogonal Decomposition revealed that the surface pressure is dominated by low-frequency unsteady shock motion, in both cases (rigid and compliant panel). The sixth POD mode clearly shows the streamwise shock foot motion oscillates at the first panel vibration frequency. The surface pressure field upstream of the shock foot is dominated by piston-theory aerodynamics and thus correlated to the slope of the compliant panel. The Sparse Identification of Nonlinear Dynamic Systems algorithm was employed to find low-order representations of the system dynamics. Linear stiffness matrices could be consistently recovered. The measurement noise however prevented extraction of additional relations, such as linear damping matrices or forcing terms from the surface pressure. 
    more » « less
  3. The vibration of a compliant panel under a shock / boundary layer interaction (SBLI) induced by a compression ramp in a Mach 2 flow, is investigated experimentally. The panel is made from brass shim stock of length (streamwise), width (spanwise) and thickness of 122 mm by 63.5 mm by 0.25 mm, respectively. The 20° compression ramp is placed near the downstream edge of the compliant panel, and it creates a shock-induced turbulent separated flow that extends over the downstream 20% of the panel. Large pressure fluctuations occur in the region of the separation shock foot unsteadiness. The pressure fluctuations increase vibration amplitudes of the higher panel modes, especially the second mode, which has an antinode near the shock foot region. In this work, the authors use structural modifications of the baseline compliant panel to mitigate vibrations induced by the large pressure fluctuations of the shock foot unsteadiness. A thin rib is attached in the spanwise direction to the lee side of the panel at the location of SBLI. In one configuration, the rib is attached to the panel using epoxy adhesive, which creates a stiff connection. In another configuration, the rib is attached to the panel via double-sided viscoelastic tape, which adds significant damping to the system. The panel vibration and surface pressure field are measured using stereoscopic digital image correlation and pressure sensitive paint. Results show that especially the second vibration mode of the panel is reduced through the addition of the rib. This effect is more pronounced in the case where the viscoelastic tape was used, where a 72% reduction in vibration is observed. 
    more » « less
  4. This work investigates surface pressure unsteadiness on a compliant panel under a shockwave/boundary-layer interaction (SBLI) induced by a 2D compression ramp with an angle of 20o in a Mach 2 wind tunnel. High-speed digital image correlation (DIC) and fast-response pressure-sensitive paint (PSP) measurements are used to measure the panel displacement and panel and ramp-face surface pressure fluctuations at 5kHz and 20kHz, respectively. The data reduction technique of POD (proper orthogonal decomposition) was employed both for pressure and displacement fields. POD mode distribution for the pressure fields reveals that the first six modes have 60% of the total energy and exhibit low-frequency content for both rigid and compliant panels. The vibration of the compliant panel was seen to alter the energy distribution of the high energy modes as compared to the rigid panel case. The cross-correlations between the displacement and pressure modes were made using the time coefficients. This analysis shows significant correlations were present among the lower modes. The highest correlation was between displacement mode 1 and the pressure mode 4, which stemmed from the upstream of the intermittent region. The analysis was also made for the surrogate shock foot and reattachment lines. The correlation shows that panel vibration lowers the correlation between the shock foot and reattachment line when compared with the rigid panel case. 
    more » « less
  5. Flight vehicles that operate in the supersonic regime can be subject to adverse fluid–structure interactions due to their lightweight design. The presence of geometric obstructions such as control surfaces or fins can induce shocks that can interact with the boundary layer, leading to flow separation. This work investigates experimentally the interaction between a compliant panel in a Mach 2 flow under a compression ramp-induced shock-wave/boundary-layer interaction (SBLI). Thin brass panels of different thickness are investigated in a wind tunnel. Tests are performed both with and without a 20◦ compression ramp installed. This direct comparison allows characterization of the effect of the SBLI on the system dynamics. High-speed stereoscopic digital image correlation (DIC) and fast-response pressure sensitive paint (PSP) are used to obtain simultaneous measurements of full field deformation and surface pressure of the panels. The panel vibration is dominated by the first bending mode. Despite the forcing of the separation shock foot, the presence of the SBLI does not significantly modify the operational deflection shape, frequency, and amplitude of the dominant vibration mode, beyond what is observed for the no-SBLI case. On the other hand, analysis of the shock foot motion shows that the shock primarily oscillates at the first natural frequency of the panel. This leads to the conclusion that the shock foot oscillation is driven by the panel vibration in a one-way coupling mechanism. The SBLI does modify the higher modes, which is likely due to localized forcing by the separation shock foot. Full-field surface pressure predictions are made using first order piston theory. Results show that the fluid–structure interaction is dominated by the large region of attached flow upstream of the shock foot. 
    more » « less