Redox is a unique, programmable modality capable of bridging communication between biology and electronics. Previous studies have shown that the
Emerging research indicates that biology routinely uses diffusible redox‐active molecules to mediate communication that can span biological systems (e.g., nervous and immune) and even kingdoms (e.g., a microbiome and its plant/animal host). This redox modality also provides new opportunities to create interactive materials that can communicate with living systems. Here, it is reported that the fabrication of a redox‐active hydrogel film can autonomously synthesize a H2O2signaling molecule for communication with a bacterial population. Specifically, a catechol‐conjugated/crosslinked 4‐armed thiolated poly(ethylene glycol) hydrogel film is electrochemically fabricated in which the added catechol moieties confer redox activity: the film can accept electrons from biological reductants (e.g., ascorbate) and donate electrons to O2to generate H2O2. Electron‐transfer from an
- NSF-PAR ID:
- 10359841
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials
- Volume:
- 33
- Issue:
- 18
- ISSN:
- 0935-9648
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract E. coli redox-responsive OxyRS regulon can be re-wired to accept electrochemically generated hydrogen peroxide (H2O2) as an inducer of gene expression. Here we report that the redox-active phenolic plant signaling molecule acetosyringone (AS) can also induce gene expression from the OxyRS regulon. AS must be oxidized, however, as the reduced state present under normal conditions cannot induce gene expression. Thus, AS serves as a “pro-signaling molecule” that can be activated by its oxidation—in our case by application of oxidizing potential to an electrode. We show that the OxyRS regulon is not induced electrochemically if the imposed electrode potential is in the mid-physiological range. Electronically sliding the applied potential to either oxidative or reductive extremes induces this regulon but through different mechanisms: reduction of O2to form H2O2or oxidation of AS. Fundamentally, this work reinforces the emerging concept that redox signaling depends more on molecular activities than molecular structure. From an applications perspective, the creation of an electronically programmed “pro-signal” dramatically expands the toolbox for electronic control of biological responses in microbes, including in complex environments, cell-based materials, and biomanufacturing. -
more » « less
Abstract Redox is emerging as an alternative modality for bio‐device communication. In contrast to the more familiar ionic electrical modality: (i) redox involves the flow of electrons through oxidation–reduction reactions; (ii) the aqueous medium is an “insulator” to this electron flow since free electrons do not normally exist in water; and (iii) redox states are intrinsically digital (oxidized and reduced). By exploiting these unique features, a catechol‐based molecular memory film is reported. This memory is fabricated by electrochemically grafting catechol to a chitosan–agarose polysaccharide network to generate a redox‐active but non‐conducting matrix. The redox state of the grafted catechol moieties serves as the 2‐state memory. It is shown that these redox states: can be repeatedly switched by diffusible mediators (electron shuttles); can be easily read electrically or optically; are stable for at least 2 h in the absence of energy; are sensitive to biologically relevant oxidizing and reducing contexts; and can be switched enzymatically. This catechol‐based molecular memory film is a simple circuit element for redox linked bioelectronics.
-
more » « less
Abstract Reduction–oxidation (redox) reactions provide a distinct modality for biological communication that is fundamentally different from the more‐familiar ion‐based electrical modality. Biology uses these two modalities for communication through different systems (immune versus nervous), and uses different mechanisms to control the flow of the charge carriers: the flow of soluble ions is controlled using structural barriers (i.e., membranes) and gates (e.g., membrane‐spanning protein channels), while the flow of insoluble electrons is controlled using redox‐reaction networks. Here, a simple electrochemical approach to pattern catechols onto a flexible polysaccharide hydrogel is reported and it is demonstrated that the patterned catechol regions serve as nodes for the mediated flow of electrons through redox reactions. Electron flow through this node involves the switching of binary redox states (oxidized and reduced) and this node's redox state can be detected (i.e., “read”) by passively observing its optical absorbance, or actively switching its redox‐state electrochemically. Further, this catechol node can be switched through biological mechanisms, and this enables the fabricated catechol node to be embedded within biochemical redox reaction networks to facilitate the spanning of bio‐electronic communication. Thus, it is envisioned that catechols can emerge as a molecular equivalent to a transistor for miniaturize‐able, deployable and sustainable redox‐linked bioelectronics.
-
Buan, Nicole R. (Ed.)more » « less
ABSTRACT Extracellular electron transfer is a process by which bacterial cells can exchange electrons with a redox-active material located outside of the cell. In
Shewanella oneidensis , this process is natively used to facilitate respiration using extracellular electron acceptors such as Fe(III) or an anode. Previously, it was demonstrated that this process can be used to drive the microbial electrosynthesis (MES) of 2,3-butanediol (2,3-BDO) inS. oneidensis exogenously expressing butanediol dehydrogenase (BDH). Electrons taken into the cell from a cathode are used to generate NADH, which in turn is used to reduce acetoin to 2,3-BDO via BDH. However, generating NADH via electron uptake from a cathode is energetically unfavorable, so NADH dehydrogenases couple the reaction to proton motive force. We therefore need to maintain the proton gradient across the membrane to sustain NADH production. This work explores accomplishing this task by bidirectional electron transfer, where electrons provided by the cathode go to both NADH formation and oxygen (O2) reduction by oxidases. We show that oxidases use trace dissolved oxygen in a microaerobic bioelectrical chemical system (BES), and the translocation of protons across the membrane during O2reduction supports 2,3-BDO generation. Interestingly, this process is inhibited by high levels of dissolved oxygen in this system. In an aerated BES, O2molecules react with the strong reductant (cathode) to form reactive oxygen species, resulting in cell death.IMPORTANCE Microbial electrosynthesis (MES) is increasingly employed for the generation of specialty chemicals, such as biofuels, bioplastics, and cancer therapeutics. For these systems to be viable for industrial scale-up, it is important to understand the energetic requirements of the bacteria to mitigate unnecessary costs. This work demonstrates sustained production of an industrially relevant chemical driven by a cathode. Additionally, it optimizes a previously published system by removing any requirement for phototrophic energy, thereby removing the additional cost of providing a light source. We also demonstrate the severe impact of oxygen intrusion into bioelectrochemical systems, offering insight to future researchers aiming to work in an anaerobic environment. These studies provide insight into both the thermodynamics of electrosynthesis and the importance of the bioelectrochemical systems’ design.
-
more » « less
Abstract Gasotransmitters, gaseous signaling molecules including nitric oxide (NO), carbon monoxide (CO), and hydrogen sulfide (H2S), maintain myriad physiological processes. Low levels of gasotransmitters are often associated with specific problems or diseases, so NO, CO, and H2S hold potential in treating bacterial infections, chronic wounds, myocardial infarction, ischemia, and various other diseases. However, their clinical applications as therapeutic agents are limited due to their gaseous nature, short half‐life, and broad physiological roles. One route toward the greater application of gasotransmitters in medicine is through localized delivery. Hydrogels are attractive biomedical materials for the controlled release of embedded therapeutics as they are typically biocompatible, possess high water content, have tunable mechanical properties, and are injectable in certain cases. Hydrogel‐based gasotransmitter delivery systems began with NO, and hydrogels for CO and H2S have appeared more recently. In this review, the biological importance of gasotransmitters is highlighted, and the fabrication of hydrogel materials is discussed, distinguishing between methods used to physically encapsulate small molecule gasotransmitter donor compounds or chemically tether them to a hydrogel scaffold. The release behavior and potential therapeutic applications of gasotransmitter‐releasing hydrogels are also detailed. Finally, the authors envision the future of this field and describe challenges moving forward.
