skip to main content

Explore Research Products in the NSF-PAR

Title: High throughput phenotyping of cross-sectional morphology to assess stalk lodging resistance
Abstract Background

Stalk lodging (mechanical failure of plant stems during windstorms) leads to global yield losses in cereal crops estimated to range from 5% to 25% annually. The cross-sectional morphology of plant stalks is a key determinant of stalk lodging resistance. However, previously developed techniques for quantifying cross-sectional morphology of plant stalks are relatively low-throughput, expensive and often require specialized equipment and expertise. There is need for a simple and cost-effective technique to quantify plant traits related to stalk lodging resistance in a high-throughput manner.

 Results

A new phenotyping methodology was developed and applied to a range of plant samples including, maize (Zea mays), sorghum (Sorghum bicolor), wheat (Triticum aestivum), poison hemlock (Conium maculatum), and Arabidopsis (Arabis thaliana). The major diameter, minor diameter, rind thickness and number of vascular bundles were quantified for each of these plant types. Linear correlation analyses demonstrated strong agreement between the newly developed method and more time-consuming manual techniques (R2 > 0.9). In addition, the new method was used to generate several specimen-specific finite element models of plant stalks. All the models compiled without issue and were successfully imported into finite element software for analysis. All the models demonstrated reasonable and stable solutions when subjected to realistic applied loads.

 Conclusions

A rapid, low-cost, and user-friendly phenotyping methodology was developed to quantify two-dimensional plant cross-sections. The methodology offers reduced sample preparation time and cost as compared to previously developed techniques. The new methodology employs a stereoscope and a semi-automated image processing algorithm. The algorithm can be used to produce specimen-specific, dimensionally accurate computational models (including finite element models) of plant stalks.

  more » « less
NSF-PAR ID:
10361282
Author(s) / Creator(s):
; ;
Publisher / Repository:
Springer Science + Business Media
Date Published:
Journal Name:
Plant Methods
Volume:
18
Issue:
1
ISSN:
1746-4811
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ( , Plant Methods)
    Abstract Background

    Stalk lodging (breaking of agricultural plant stalks prior to harvest) is a multi-billion dollar a year problem. Stalk lodging occurs when high winds induce bending moments in the stalk which exceed the bending strength of the plant. Previous biomechanical models of plant stalks have investigated the effect of cross-sectional morphology on stalk lodging resistance (e.g., diameter and rind thickness). However, it is unclear if the location of stalk failure along the length of stem is determined by morphological or compositional factors. It is also unclear if the crops are structurally optimized, i.e., if the plants allocate structural biomass to create uniform and minimal bending stresses in the plant tissues. The purpose of this paper is twofold: (1) to investigate the relationship between bending stress and failure location of maize stalks, and (2) to investigate the potential of phenotyping for internode-level bending stresses to assess lodging resistance.

     Results

    868 maize specimens representing 16 maize hybrids were successfully tested in bending to failure. Internode morphology was measured, and bending stresses were calculated. It was found that bending stress is highly and positively associated with failure location. A user-friendly computational tool is presented to help plant breeders in phenotyping for internode-level bending stress. Phenotyping for internode-level bending stresses could potentially be used to breed for more biomechanically optimal stalks that are resistant to stalk lodging.

     Conclusions

    Internode-level bending stress plays a potentially critical role in the structural integrity of plant stems. Equations and tools provided herein enable researchers to account for this phenotype, which has the potential to increase the bending strength of plants without increasing overall structural biomass.

     
    more » « less
  2. ; ; ; ( , Biosystems engineering)
    Stalk lodging, or failure of the stalk structure, is a serious problem in the production of maize (corn). Addressing this problem requires an understanding of the parameters that influence lodging resistance. Computational modelling is a powerful tool for this purpose, but current modelling methods have limited throughput and do not provide the ability to modify individual geometric features. A parameterised model of the maize stalk has the potential to overcome these limitations. The purposes of this study were to (a) develop a parameterised model of the maize stalk cross-section that could accurately simulate the physical response of multiple loading cases, and (b) use this model to rigorously investigate the relationships between cross-sectional morphology and predictive model accuracy. Principal component analysis was utilised to reveal underlying geometric patterns which were used as parameters in a cross-sectional model. A series of approximated cross-sections was created that represented various levels of geometric fidelity. The true and approximated cross-sections were modelled in axial tension/compression, bending, transverse compression, and torsion. For each loading case, the predictive accuracy of each approximated model was calculated. A sensitivity study was also performed to quantify the influence of individual parameters. The simplest model, an elliptical cross-section consisting of just three parameters: major diameter, minor diameter, and rind thickness, accurately predicted the structural stiffness of all four loading cases. The modelling approach used in this study model can be used to parameterise the maize cross-section to any desired level of geometric fidelity, and could be applied to other plant species. 
    more » « less
  3. ; ; ( , Scientific reports)
    The maize (Zea mays) stem is a biological structure that must balance both biotic and structural load bearing duties. These competing requirements are particularly relevant in the design of new bioenergy crops. Although increased stem digestibility is typically associated with a lower structural strength and higher propensity for lodging, with the right balance between structural and biological activities it may be possible to design crops that are high-yielding and have digestible biomass. This study investigates the hypothesis that geometric factors are much more influential in determining structural strength than tissue properties. To study these influences, both physical and in silico experiments were used. First, maize stems were tested in three-point bending. Specimen-specific finite element models were created based on x-ray computed tomography scans. Models were validated by comparison with experimental data. Sensitivity analyses were used to assess the influence of structural parameters such as geometric and material properties. As hypothesized, geometry was found to have a much stronger influence on structural stability than material properties. This information reinforces the notion that deficiencies in tissue strength could be offset by manipulation of stalk morphology, thus allowing the creation of stalks which are both resilient and digestible. 
    more » « less
  4. ; ; ; ; ; ; ; ( , Applications in Plant Sciences)
    Premise

    Maize yields have significantly increased over the past half‐century owing to advances in breeding and agronomic practices. Plants have been grown in increasingly higher densities due to changes in plant architecture resulting in plants with more upright leaves, which allows more efficient light interception for photosynthesis. Natural variation for leaf angle has been identified in maize and sorghum using multiple mapping populations. However, conventional phenotyping techniques for leaf angle are low throughput and labor intensive, and therefore hinder a mechanistic understanding of how the leaf angle of individual leaves changes over time in response to the environment.

     Methods

    High‐throughput time series image data from water‐deprived maize (Zea mayssubsp.mays) and sorghum (Sorghum bicolor) were obtained using battery‐powered time‐lapse cameras. A MATLAB‐based image processing framework, Leaf Angle eXtractor (LAX), was developed to extract and quantify leaf angles from images of maize and sorghum plants under drought conditions.

     Results

    Leaf angle measurements showed differences in leaf responses to drought in maize and sorghum. Tracking leaf angle changes at intervals as short as one minute enabled distinguishing leaves that showed signs of wilting under water deprivation from other leaves on the same plant that did not show wilting during the same time period.

     Discussion

    Automating leaf angle measurements using LAX makes it feasible to perform large‐scale experiments to evaluate, understand, and exploit the spatial and temporal variations in plant response to water limitations.

     
    more » « less
  5. ; ; ( , Plant Methods)
    null (Ed.)
    Abstract Background Measurements of rind and culm thickness and stem radius/diameter are important to biomechanical, ecological and physiological plant studies. However, many methods of measuring rind thickness and diameter are labor intensive and induce plant fatality. A novel rind puncture methodology for obtaining measurements of rind thickness and diameter has been developed. The suitability of the new method for implementation in plant studies is presented. Results The novel rind puncture technique was used to obtain measurements of rind thickness and diameter for samples of Poison Hemlock ( Conium maculatum ). The rind puncture measurements were strongly correlated with caliper measurements (R 2  > 0.97) and photographic image analysis measurements (R 2  > 0.84). The capacity for high throughput measurements using the rind puncture technique was determined to exceed that of caliper measurements and image analysis techniques. Conclusions The rind puncture technique shows promise as a high throughput method for determining rind thickness and diameter as it is cost effective and non-lethal. The authors are currently working to develop a custom handheld apparatus to allow the novel rind puncture method to be used in field work. High throughput field-based measurements of rind thickness and diameter are needed to help address the problem of stalk lodging (failure of grain crops to remain upright until harvest). 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email