skip to main content

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Comprehensive topography characterization of polycrystalline diamond coatings
Abstract

The surface topography of diamond coatings strongly affects surface properties such as adhesion, friction, wear, and biocompatibility. However, the understanding of multi-scale topography, and its effect on properties, has been hindered by conventional measurement methods, which capture only a single length scale. Here, four different polycrystalline diamond coatings are characterized using transmission electron microscopy to assess the roughness down to the sub-nanometer scale. Then these measurements are combined, using the power spectral density (PSD), with conventional methods (stylus profilometry and atomic force microscopy) to characterize all scales of topography. The results demonstrate the critical importance of measuring topography across all length scales, especially because their PSDs cross over one another, such that a surface that is rougher at a larger scale may be smoother at a smaller scale and vice versa. Furthermore, these measurements reveal the connection between multi-scale topography and grain size, with characteristic scaling behavior at and slightly below the mean grain size, and self-affine fractal-like roughness at other length scales. At small (subgrain) scales, unpolished surfaces exhibit a common form of residual roughness that is self-affine in nature but difficult to detect with conventional methods. This approach of capturing topography from the atomic- to the macro-scale is termedcomprehensive topography characterization, and all of the topography data from these surfaces has been made available for further analysis by experimentalists and theoreticians. Scientifically, this investigation has identified four characteristic regions of topography scaling in polycrystalline diamond materials.

  more » « less
Award ID(s):
1727378
PAR ID:
10361872
Author(s) / Creator(s):
; ; ; ; ; ;
Publisher / Repository:
IOP Publishing
Date Published:
Journal Name:
Surface Topography: Metrology and Properties
Volume:
9
Issue:
1
ISSN:
2051-672X
Page Range / eLocation ID:
Article No. 014003
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ( , Experimental Mechanics)
    null (Ed.)
    Background: Surface topography strongly modifies adhesion of hard-material contacts, yet roughness of real surfaces typically exists over many length scales, and it is not clear which of these scales has the strongest effect. Objective: This investigation aims to determine which scales of topography have the strongest effect on macroscopic adhesion. Methods: Adhesion measurements were performed on technology-relevant diamond coatings of varying roughness using spherical ruby probes that are large enough (0.5-mm-diameter) to sample all length scales of topography. For each material, more than 2000 measurements of pull-off force were performed in order to investigate the magnitude and statistical distribution of adhesion. Using sphere-contact models, the roughness-dependent effective values of work of adhesion were measured, ranging from 0.08 to 7.15 mJ/m^2 across the four surfaces. The data was more accurately fit using numerical analysis, where an interaction potential was integrated over the AFM-measured topography of all contacting surfaces. Results: These calculations revealed that consideration of nanometer-scale plasticity in the materials was crucial for a good quantitative fit of the measurements, and the presence of such plasticity was confirmed with AFM measurements of the probe after testing. This analysis enabled the extraction of geometry-independent material parameters; the intrinsic work of adhesion between ruby and diamond was determined to be 46.3 mJ/m^2. The range of adhesion was 5.6 nm, which is longer than is typically assumed for atomic interactions, but is in agreement with other recent investigations. Finally, the numerical analysis was repeated for the same surfaces but this time with different length-scales of roughness included or filtered out. Conclusions: The results demonstrate a critical band of length-scales—between 43 nm and 1.8 µm in lateral size—that has the strongest effect on the total adhesive force for these hard, rough contacts. 
    more » « less
  2. ; ; ; ; ( , Proceedings of the 20th euspen International Conference and Exhibition)
    Single crystal calcium fluoride (CaF2) is widely used for transmissive optics in the ultraviolet and vacuum ultraviolet (UV and VUV) spectral regions because of its high optical transmission. Optical components made of CaF2 are usually manufactured by precision machining to generate high quality surfaces with low surface roughness. However, the influence of the clamping technique on the resulting surface roughness of diamond machined CaF2 has not been reported. In this research, two clamping techniques, vacuum clamping and gluing with wax, are used in off-axis diamond turning experiments with zero degree and negative rake angle diamond tools. Surface characterization by white light interferometry and atomic force microscopy show surfaces with low surface roughness. Furthermore, a significant influence of the clamping technique on the generated surface topography is observed. 
    more » « less
  3. ; ; ; ( , Earth Surface Processes and Landforms)
    Abstract

    Flow resistance in mountain streams is important for assessing flooding hazard and quantifying sediment transport and bedrock incision in upland landscapes. In such settings, flow resistance is sensitive to grain‐scale roughness, which has traditionally been characterized by particle size distributions derived from laborious point counts of streambed sediment. Developing a general framework for rapid quantification of resistance in mountain streams is still a challenge. Here we present a semi‐automated workflow that combines millimeter‐ to centimeter‐scale structure‐from‐motion (SfM) photogrammetry surveys of bed topography and computational fluid dynamics (CFD) simulations to better evaluate surface roughness and rapidly quantify flow resistance in mountain streams. The workflow was applied to three field sites of gravel, cobble, and boulder‐bedded channels with a wide range of grain size, sorting, and shape. Large‐eddy simulations with body‐fitted meshes generated from SfM photogrammetry‐derived surfaces were performed to quantify flow resistance. The analysis of bed microtopography using a second‐order structure function identified three scaling regimes that corresponded to important roughness length scales and surface complexity contributing to flow resistance. The standard deviationσzof detrended streambed elevation normalized by water depth, as a proxy for the vertical roughness length scale, emerges as the primary control on flow resistance and is furthermore tied to the characteristic length scale of rough surface‐generated vortices. Horizontal length scales and surface complexity are secondary controls on flow resistance. A new resistance predictor linking water depth and vertical roughness scale, i.e. H/σz, is proposed based on the comparison betweenσzand the characteristic length scale of vortex shedding. In addition, representing streambeds using digital elevation models (DEM) is appropriate for well‐sorted streambeds, but not for poorly sorted ones under shallow and medium flow depth conditions due to the missing local overhanging features captured by fully 3D meshes which modulate local pressure gradient and thus bulk flow separation and pressure distribution. An appraisal of the mesh resolution effect on flow resistance shows that the SfM photogrammetry data resolution and the optimal CFD mesh size should be about 1/7 to 1/14 of the standard deviation of bed elevation. © 2019 John Wiley & Sons, Ltd.

     
    more » « less
  4. ; ; ; ; ( , Applied surface science advances)
    The failure of roughness parameters to predict surface properties stems from their inherent scale-dependence; in other words, the measured value depends on how the parameter was measured. Here we take advantage of this scale-dependence to develop a new framework for characterizing rough surfaces: the Scale-Dependent Roughness Parameters (SDRP) analysis, which yields slope, curvature, and higher-order derivatives of surface topography at many scales, even for a single topography measurement. We demonstrate the relationship between SDRP and other common statistical methods for analyzing surfaces: the height-difference autocorrelation function (ACF), variable bandwidth methods (VBMs) and the power spectral density (PSD). We use computer-generated and measured topographies to demonstrate the benefits of SDRP analysis, including: novel metrics for characterizing surfaces across scales, and the detection of measurement artifacts. The SDRP is a generalized framework for scale-dependent analysis of surface topography that yields metrics that are intuitively understandable. 
    more » « less
  5. ; ; ; ( , Manufacturing Letters)
    The atomic force microscopy (AFM) technology is a promising method for nanofabrication due to the high tunability of this affordable platform. The quality inspection and control significantly impact the manufacturing effectiveness for realizing the functionality of the achieved nanochannel. Particularly, the surface characteristics of nanochannel sidewalls, which play a significant role in determining the quality of the nanomachined products, can not be accurately captured using conventional surface integrity metrics (e.g., surface roughness). Therefore, it is necessary to propose a method to quantitatively characterize the surface morphology and detect the abnormal parts/regions of the nanochannel sidewall. This paper presents a statistical process control approach derived from the self-affine fractal model to detect the sidewall surface anomalies. It evaluates changes in the self-affine fractal model parameters (standard deviation, correlation length, and roughness exponent), which can be used to signify the changes on the sidewall surface; the statistical distributions of these parameters are derived and used to develop control charts to allow inspection of the sidewall morphology. The approach was tested on the AFM-based nanomachined samples. The results suggest that the presented approach can effectively reflect the abnormal regions on the machined parts, which opens up a new avenue toward guiding the quality control and rework for process improvement for AFM-based nanomachining. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email