This paper presents a method to design a nonholonomic virtual constraint (NHVC) controller that produces multiple distinct stance-phase trajectories for corresponding walking speeds. NHVCs encode velocity-dependent joint trajectories via momenta conjugate to the unactuated degree(s)-of-freedom of the system. We recently introduced a method for designing NHVCs that allow for stable bipedal robotic walking across variable terrain slopes. This work extends the notion of NHVCs for application to variable-cadence powered prostheses. Using the segmental conjugate momentum for the prosthesis, an optimization problem is used to design a single stance-phase NHVC for three distinct walking speed trajectories (slow, normal, and fast). This stance-phase controller is implemented with a holonomic swing phase controller on a powered knee-ankle prosthesis, and experiments are conducted with an able-bodied user walking in steady and non-steady velocity conditions. The control scheme is capable of representing 1) multiple, task-dependent reference trajectories, and 2) walking gait variance due to both temporal and kinematic changes in user motion.
more »
« less
What is Stance Phase on Deformable Substrates?
The stance phase of walking is when forces are applied to the environment to support, propel, and maneuver the body. Unlike solid surfaces, deformable substrates yield under load, allowing the foot to sink to varying degrees. For bipedal birds and their dinosaurian ancestors, a shared response to walking on these substrates has been identified in the looping path the digits follow underground. Because a volume of substrate preserves a 3-D record of stance phase in the form of footprints or tracks, understanding how the bipedal stride cycle relates to this looping motion is critical for building a track-based framework for the study of walking in extinct taxa. Here, we used biplanar X-ray imaging to record and analyze 161 stance phases from 81 trials of three Helmeted Guineafowl (Numida meleagris) walking on radiolucent substrates of different consistency (solid, dry granular, and firm to semi-liquid muds). Across all substrates, the feet sank to a range of depths up to 78% of hip height. With increasing substrate hydration, the majority of foot motion shifted from above to below ground. Walking kinematics sampled across all stride cycles revealed six sequential gait-based events originating from both feet, conserved throughout the spectrum of substrate consistencies during normal alternating walking. On all substrates that yielded, five sub-phases of stance phase were drawn out in space and formed a loop of varying shape. We describe the two-footed coordination and weight distribution that likely contributed to the observed looping patterns of an individual foot. Given such complex subsurface foot motion during normal alternating walking and some atypical walking behaviors, we discuss the definition of “stance phase” on deformable substrates. We also discuss implications of the gait-based origins of subsurface looping on the interpretation of locomotory information preserved in fossil dinosaur tracks.
more » « less- PAR ID:
- 10365486
- Publisher / Repository:
- Oxford University Press
- Date Published:
- Journal Name:
- Integrative and Comparative Biology
- ISSN:
- 1540-7063
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
more » « less
Abstract Whilst bones present a static view of extinct animals, fossil footprints are a direct record of the activity and motion of the track maker. Deep footprints are a particularly good record of foot motion. Such footprints rarely look like the feet that made them; the sediment being heavily disturbed by the foot motion. Because of this, such tracks are often overlooked or dismissed in preference for more foot‐like impressions. However, the deeper the foot penetrates the substrate, the more motion is captured in the sediment volume. We have used deep, penetrative, Jurassic dinosaur tracks which have been naturally split into layers, to reconstruct foot motions of animals living over 200 million years ago. We consider these reconstructions to be hypotheses of motion. To test these hypotheses, we use the Discrete Element Method, in which individual particles of substrate are simulated in response to a penetrating foot model. Simulations that produce virtual tracks morphologically similar to the fossils lend support to the motion being plausible, while simulations that result in very different final tracks serve to reject the hypothesis of motion and help generate a new hypothesis.
-
Controller design for bipedal walking on dynamic rigid surfaces (DRSes), which are rigid surfaces moving in the inertial frame (e.g., ships and airplanes), remains largely underexplored. This paper introduces a hierarchical control approach that achieves stable underactuated bipedal walking on a horizontally oscillating DRS. The highest layer of our approach is a real-time motion planner that generates desired global behaviors (i.e., center of mass trajectories and footstep locations) by stabilizing a reduced-order robot model. One key novelty of this layer is the derivation of the reduced-order model by analytically extending the angular momentum based linear inverted pendulum (ALIP) model from stationary to horizontally moving surfaces. The other novelty is the development of a discrete-time foot-placement controller that exponentially stabilizes the hybrid, linear, time-varying ALIP. The middle layer translates the desired global behaviors into the robot’s full-body reference trajectories for all directly actuated degrees of freedom, while the lowest layer exponentially tracks those reference trajectories based on the full-order, hybrid, nonlinear robot model. Simulations confirm that the proposed framework ensures stable walking of a planar underactuated biped under different swaying DRS motions and gait types.more » « less
-
null (Ed.)Abstract Hemiparetic walking after stroke is typically slow, asymmetric, and inefficient, significantly impacting activities of daily living. Extensive research shows that functional, intensive, and task-specific gait training is instrumental for effective gait rehabilitation, characteristics that our group aims to encourage with soft robotic exosuits. However, standard clinical assessments may lack the precision and frequency to detect subtle changes in intervention efficacy during both conventional and exosuit-assisted gait training, potentially impeding targeted therapy regimes. In this paper, we use exosuit-integrated inertial sensors to reconstruct three clinically meaningful gait metrics related to circumduction, foot clearance, and stride length. Our method corrects sensor drift using instantaneous information from both sides of the body. This approach makes our method robust to irregular walking conditions poststroke as well as usable in real-time applications, such as real-time movement monitoring, exosuit assistance control, and biofeedback. We validate our algorithm in eight people poststroke in comparison to lab-based optical motion capture. Mean errors were below 0.2 cm (9.9%) for circumduction, −0.6 cm (−3.5%) for foot clearance, and 3.8 cm (3.6%) for stride length. A single-participant case study shows our technique’s promise in daily-living environments by detecting exosuit-induced changes in gait while walking in a busy outdoor plaza.more » « less
-
more » « less
Abstract An ongoing thrust of research focused on human gait pertains to identifying individuals based on gait patterns. However, no existing gait database supports modeling efforts to assess gait patterns unique to individuals. Hence, we introduce the Nonlinear Analysis Core (NONAN) GaitPrint database containing whole body kinematics and foot placement during self-paced overground walking on a 200-meter looping indoor track. Noraxon Ultium MotionTMinertial measurement unit (IMU) sensors sampled the motion of 35 healthy young adults (19–35 years old; 18 men and 17 women;
mean ± 1s.d . age: 24.6 ± 2.7 years; height: 1.73 ± 0.78 m; body mass: 72.44 ± 15.04 kg) over 18 4-min trials across two days. Continuous variables include acceleration, velocity, position, and the acceleration, velocity, position, orientation, and rotational velocity of each corresponding body segment, and the angle of each respective joint. The discrete variables include an exhaustive set of gait parameters derived from the spatiotemporal dynamics of foot placement. We technically validate our data using continuous relative phase, Lyapunov exponent, and Hurst exponent—nonlinear metrics quantifying different aspects of healthy human gait.
