skip to main content


Title: Twisted A‐D‐A Type Acceptors with Thermally‐Activated Delayed Crystallization Behavior for Efficient Nonfullerene Organic Solar Cells
Abstract

Molecular aggregation and crystallization during film coating play a crucial role in the realization of high‐performing organic photovoltaics. Strong intermolecular interactions and high solid‐state crystallinity are beneficial for charge transport. However, fast crystallization during thin‐film drying often limits the formation of the finely phase‐separated morphology required for efficient charge generation. Herein, the authors show that twisted acceptor‐donor‐acceptor (A‐D‐A) type compounds, containing an indacenodithiophene (IDT) electron‐rich core and two naphthalenediimide (NDI) electron‐poor units, leads to formation of mostly amorphous phases in the as‐cast film, which can be readily converted into more crystalline domains by means of thermal annealing. This design strategy solves the aforementioned conundrum, leading to an optimal morphology in terms of reduced donor/acceptor domain‐separation sizes (ca. 13 nm) and increased packing order. Solar cells based on these acceptors with a PBDB‐T polymer donor show a power conversion efficiency over 10% and stable morphology, which results from the combined properties of desirable excited‐state dynamics, high charge mobility, and optimal aggregation/crystallization characteristics. These results demonstrate that the twisted A‐D‐A motif featuring thermally‐induced crystallization behavior is indeed a promising alternative design approach toward more morphologically robust materials for efficient organic photovoltaics.

 
more » « less
PAR ID:
10366967
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Energy Materials
Volume:
12
Issue:
18
ISSN:
1614-6832
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    A major breakthrough in the field of organic photovoltaics (OPVs) was the development of the donor/acceptor heterojunction that aids in separating Coulombically bound excitons that are generated upon photoabsorption. Additionally, bound charge transfer (CT) states that result from the exchange of charge carriers across the donor/acceptor interface are believed to play an important role in charge generation. Though organic thin films are often disordered, enhancements to the local structural order at the donor/acceptor interface have recently been shown to greatly influence CT state energetics and the charge generation process. In this progress report, recent efforts to understand the role that donor/acceptor morphology plays in the behavior of CT states and the resulting implications on OPV function are presented. It is aimed to provide a survey of different experimental approaches and to present a balanced examination of current interpretations of key results, and to offer best practices for the fabrication and study of morphologically tunable donor/acceptor CT states.

     
    more » « less
  2. null (Ed.)
    Organic donor–acceptor (D–A) co-crystals have attracted much interest due to their important optical and electronic properties. Co-crystals having ⋯DADA⋯ π-stacked morphologies are especially interesting because photoexcitation produces a charge-transfer (CT) exciton, D˙ + –A˙ − , between adjacent D–A molecules. Although several studies have reported on the steady-state optical properties of this type of CT exciton, very few have measured the dynamics of its formation and decay in a single D–A co-crystal. We have co-crystallized a peri -xanthenoxanthene ( PXX ) donor with a N , N -bis(3-pentyl)-2,5,8,11-tetraphenylperylene-3,4:9,10-bis(dicarboximide) ( Ph4PDI ) acceptor to give an orthorhombic PXX – Ph4PDI ⋯DADA⋯ π-stacked co-crystal with a CT transition dipole moment that is perpendicular to the transition moments for S n ← S 0 excitation of PXX and Ph4PDI . Using polarized, broadband, femtosecond pump–probe microscopy, we have determined that selective photoexcitation of Ph4PDI in the single co-crystal results in CT exciton formation within the 300 fs instrument response time. At early times (0.3 ≤ t ≤ 500 ps), the CT excitons decay with a t −1/2 dependence, which is attributed to CT biexciton annihilation within the one-dimensional ⋯DADA⋯ π-stacks producing high-energy, long-lived (>8 ns) electron–hole pairs in the crystal. These energetic charge carriers may prove useful in applications ranging from photovoltaics and opto-electronics to photocatalysis. 
    more » « less
  3. Abstract

    Incorporating narrow‐bandgap near‐infrared absorbers as the third component in a donor/acceptor binary blend is a new strategy to improve the power conversion efficiency (PCE) of organic photovoltaics (OPV). However, there are two main restrictions: potential charge recombination in the narrow‐gap material and miscompatibility between each component. The optimized design is to employ a third component (structurally similar to the donor or acceptor) with a lowest unoccupied molecular orbital (LUMO) energy level similar to the acceptor and a highest occupied molecular orbital (HOMO) energy level similar to the donor. In this design, enhanced absorption of the active layer and enhanced charge transfer can be realized without breaking the optimized morphology of the active layer. Herein, in order to realize this design, two new narrow‐bandgap nonfullerene acceptors with suitable energy levels and chemical structures are designed, synthesized, and employed as the third component in the donor/acceptor binary blend, which boosts the PCE of OPV to 11.6%.

     
    more » « less
  4. Electron donor–acceptor co-crystals are receiving increasing interest because of their many useful optoelectronic properties. While the steady-state properties of many different co-crystals have been characterized, very few studies have addressed how crystal morphology affects the dynamics of charge transfer (CT) exciton formation, migration, and decay, which are often critical to their performance in device structures. Here we show that co-crystallization of a pyrene (Pyr) electron donor with either N , N ′-bis(2,6-diisopropylphenyl)- or N , N ′-bis(3′-pentyl)-perylene-3,4:9,10-bis(dicarboximide) (diisoPDI or C 5 PDI) electron acceptors, respectively, yields mixed π-stacked Pyr–diisoPDI or Pyr–C 5 PDI donor–acceptor co-crystals. Femtosecond transient absorption microscopy is used to determine the CT exciton dynamics in these single crystals. Fitting the data to a one-dimensional charge transfer CT exciton diffusion model reveals a diffusion constant that is two orders of magnitude higher in the Pyr–diisoPDI co-crystal compared to the Pyr–C 5 PDI co-crystal. By correlating the co-crystal structures to their distinct excited-state dynamics, the effects of each mixed stacked structure on the exciton dynamics and the mechanisms of CT exciton diffusion are elucidated. 
    more » « less
  5. Abstract

    Understanding the correlation between polymer aggregation, miscibility, and device performance is important to establish a set of chemistry design rules for donor polymers with nonfullerene acceptors (NFAs). Employing a donor polymer with strong temperature‐dependent aggregation, namely PffBT4T‐2OD [poly[(5,6‐difluoro‐2,1,3‐benzothiadiazol‐4,7‐diyl)‐alt‐(3,3″′‐di(2‐octyldodecyl)‐2,2′;5′,2″;5″,2″′‐quaterthiophen‐5,5‐diyl)], also known as PCE‐11 as a base polymer, five copolymer derivatives having a different thiophene linker composition are blended with the common NFA O‐IDTBR to investigate their photovoltaic performance. While the donor polymers have similar optoelectronic properties, it is found that the device power conversion efficiency changes drastically from 1.8% to 8.7% as a function of thiophene content in the donor polymer. Results of structural characterization show that polymer aggregation and miscibility with O‐IDTBR are a strong function of the chemical composition, leading to different donor–acceptor blend morphology. Polymers having a strong tendency to aggregate are found to undergo fast aggregation prior to liquid–liquid phase separation and have a higher miscibility with NFA. These properties result in smaller mixed donor–acceptor domains, stronger PL quenching, and more efficient exciton dissociation in the resulting cells. This work indicates the importance of both polymer aggregation and donor–acceptor interaction on the formation of bulk heterojunctions in polymer:NFA blends.

     
    more » « less