skip to main content


Title: Transient Structural Colors with Magnesium‐Based Reflective Filters
Abstract

Structural color filters have recently blossomed as a superior alternative to organic dyes or chemical pigments owing to their remarkable durability and compactness. With appropriate design, nanostructure‐induced photonic or plasmonic resonance modes can give rise to either enhancement in transmission or suppression in the reflection within specific wavelength ranges in the optical regime, generating distinctive colors. However, the static optical properties due to fixed structural geometry and size after fabrication hinder their deployment in many cutting‐edge technologies requiring adaptive complexion changes. Here, a multilayer thin film‐based color filter incorporating Mg and MgO, earth‐abundant and biodegradable materials, is devised. The devices display vivid hues spanning a broad gamut via the control of the film thickness. They also exhibit minimal color changes with varying angle views up to 40°–50°. Moreover, the tones fade away instantly upon immersion in water and then progressively transition to a different hue with the complete removal of the Mg‐containing layers, realizing transient color responses. This approach holds great promise for alternative pixels with irreversible color‐change capability as well as zero‐power consumption and low cost, while making use of biodegradable materials.

 
more » « less
NSF-PAR ID:
10368735
Author(s) / Creator(s):
 ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Optical Materials
Volume:
10
Issue:
13
ISSN:
2195-1071
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    Smart surfaces that can dynamically respond to environmental stimuli have demonstrated great promise in wearable electronics and optical detectors. Herein, a photopatternable nanolayered polymeric film that can reversibly display and hide structural colors in the visible range in response to relative humidity (RH) changes is reported. This film is fabricated on a silicon substrate using layer‐by‐layer assembly of chitosan and photoreactive carboxymethyl cellulose‐azido derivative, and selectively crosslinked through UV irradiation from a photomask. Compared to crosslinked regions, un‐crosslinked ones swell more and result in a larger thickness at high RH; as a result, those two regions show distinguishable color differences. The correlation of displayed color with film thickness at various RHs is plotted in an International Commission on Illumination (CIE) chromaticity diagram, which is in good agreement with the results obtained from modeling based on the interference theory. It is demonstrated that the structural color patterns on the film can be hidden and displayed spontaneously by contact with humid air, including human breath. This humidity‐triggered color change is fast, of fine resolution, highly reversible, and compatible with most silicon‐based devices. This film is low‐cost, stable, and ready to be applied to large surface areas for potential applications in anticounterfeiting, humidity sensors, and optical color filters.

     
    more » « less
  2. Scales ofCyphochiluswhite beetles present one of the strongest optical scattering materials in nature. However, the intricate optical fibrillar network nanostructure inside the scales has been difficult to mimic. Here, characteristic structural parameters insideCyphochilusscales – mean fiber diameter, diameter distribution, filling fraction, and structural anisotropy – are replicated in synthetic nanofibrous materials to functionally mimic the biological material. To fabricate the synthetic nanostructure, electrospinning is chosen because this conventional technique is amenable to nanomanufacturing. The optimized parameters in electrospun structures are found to be only slightly different from those inCyphochilusscales. At the optimum, electrospun structures exhibit even stronger optical scattering thanCyphochilusscales. An electrospun film with the similar characteristic structural parameters as those inCyphochilusscales gives two resonance peaks in visible reflectance spectrum in the limit of a uniform fiber diameter, giving a purple structural color. As the distribution of diameter increases appreciably to experimentally achievable degrees, the resonance peaks broaden and the reflectance spectrum becomes relatively flat, resulting in disappearance of the structural color. These results support that controllable fibrous nanostructures that exceed the exceptionally strong broadband optical scattering found among living organisms can be volume-produced.

     
    more » « less
  3. While titania and carbon are conventionally perceived as white and black materials, here we show that their combination in the form of composite hollow nanoshells can display striking colors with considerably high contrast through resonant Mie scattering. Our unique design utilizes hollow nanostructures to produce the color by minimizing random multiple scattering and the incorporated carbon species to act as an internal black background to suppress multiple scattering and enhance the color contrast. Synthesized through a simple sol–gel process followed by high-temperature carbonization, these hollow carbon-containing titania (C-TiO 2 ) nanoshells can exhibit variable bright colors from purple to blue and green by controlling their diameter. They can be conveniently used as alternative pigments in many color-related applications, with the advantages of high chemical and optical stability and low toxicity that are associated with titania and carbon materials and the structural coloration mechanism. In addition, as the visible Mie scattering responds rapidly and reversibly to changes in the surrounding medium, these nanoshells may also serve as active color components for many applications that require dynamic color switching, such as signage and displays, colorimetric sensors and detectors, and anti-counterfeiting devices. 
    more » « less
  4. Abstract

    Optical absorbers comprised of an ultrathin lossy dielectric film on an opaque metallic substrate are an attractive alternative to lithographically intense metamaterial and nanoplasmonic optical absorbers as they allow for large‐scale, cost‐effective fabrication. However, requiring that the dielectric is lossy and the metallic substrate is highly reflective but not a perfect electric conductor (PEC) limits the wavelength range and materials that can be used to realize strong to perfect light absorption. In this work, we theoretically and experimentally investigate light absorption using ultrathin lossless dielectric films. By choosing proper lossless ultrathin dielectrics and substrates, iridescence free, perfect light absorption is possible over the visible, near infrared (NIR), and short‐wave infrared (SWIR) wavelength ranges with designer absorption properties. The proposed class of ultrathin film absorbers relaxes many constraints on the type of materials used to realize perfect light absorption. The flexibility of our design makes it relevant for many applications specifically in structural coloring, selective thermal emission, thermo‐photovoltaics, photo‐thermoelectric generation, and gas sensing.

     
    more » « less
  5. Abstract

    Stimuli‐responsive elastomers are promising material systems for the development of optical sensors with visual outputs that can be easily assessed by the human eye. These materials, when shaped into alternating layers, form distributed Bragg reflectors (DBRs) that feature a high spectrally selective reflectivity. The adsorption of vapor molecules into these photonic structures leads to partial swelling in the constituent materials that can induce pronounced color changes. Here, it is demonstrated that soft photonic fibers with a DBR‐cladding can selectively sense and quantify different organic vapors. It is found that fibers with a multilayer cladding assembled of films of polydimethylsiloxane (PDMS) and a polystyrene‐polyisoprene block‐copolymer (PSPI) change color sensitively depending on the concentration of toluene, benzene, tetrahydrofuran, or chloroform vapors. It is shown that this is a direct consequence of a selective swelling of the constituent polymer layers due to vapor adsorption. With wavelength variations as small as 5 nm being noticeable to the human eye, such photonic fibers are interesting materials for optical sensors. Modifications of their building blocks and their structural morphology make these vapor‐sensing fibers a versatile platform for standalone and textile‐integrated solvent sensing systems applied in industrial and lab‐scale manufacturing processes.

     
    more » « less