The electron–hole recombination kinetics of organic photovoltaics (OPVs) are known to be sensitive to the relative energies of triplet and charge‐transfer (CT) states. Yet, the role of exciton spin in systems having CT states above 1.7 eV—like those in near‐ultraviolet‐harvesting OPVs—has largely not been investigated. Here, aggregation‐induced room‐temperature intersystem crossing (ISC) to facilitate exciton harvesting in OPVs having CT states as high as 2.3 eV and open‐circuit voltages exceeding 1.6 V is reported. Triplet excimers from energy‐band splitting result in ultrafast CT and charge separation with nonradiative energy losses of <250 meV, suggesting that a 0.1 eV driving force is sufficient for charge separation, with entropic gain via CT state delocalization being the main driver for exciton dissociation and generation of free charges. This finding can inform engineering of next‐generation active materials and films for near‐ultraviolet OPVs with open‐circuit voltages exceeding 2 V. Contrary to general belief, this work reveals that exclusive and efficient ISC need not require heavy‐atom‐containing active materials. Molecular aggregation through thin‐film processing provides an alternative route to accessing 100% triplet states on photoexcitation.
A recombination and exciton loss mechanism is reported in organic solar cells involving energy transfer between charge transfer (CT) excitons and polarons, impacting photocurrent generation, particularly in the near‐infrared where polaronic transitions typically reside. This process sets a low‐energy cut‐off in the external quantum efficiency spectrum of an excitonic donor/acceptor interface, determined by the low‐energy polaron absorption peak and the CT state reorganization energy. Furthermore, this process explains the deviation from unity and bias dependence of the CT state's internal quantum efficiency at low photon energies. This process is demonstrated in a variety of systems and it is hypothesized that CT state to polaron energy transfer recombination may be responsible for a share of nonradiative recombination in all organic photovoltaics and can explain numerous experimentally observed device trends regarding photocurrent generation and energy losses. Overall, this work enhances the understanding of photophysical processes in organic materials and allows the design of systems that can avoid this recombination pathway.
more » « less- NSF-PAR ID:
- 10368965
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Energy Materials
- Volume:
- 12
- Issue:
- 19
- ISSN:
- 1614-6832
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Abstract Nanoscopic packing structures crucially determine the charge conduction and the consequent functionalities of organic semiconductors including bulk heterojunctions (BHJs), which are dependent on various processing parameters. Today's high‐performance colloidal quantum dot photovoltaics (CQDPVs) employ functional organic semiconductors as a hole transport layer (HTL). However, the processing of those films replicates a protocol dedicated to high‐performance organic PVs, and thus little is known about how to control the molecular packing structures to maximize the hole extraction function of the HTLs. Herein, it is uncovered that the random‐oriented, but closer‐packed BHJ crystallites, constructed by 1,2‐dichlorobenzene (
o ‐DCB) as a solvent, allow exceptional charge conduction vertically across the film and restrict diffusion‐driven charge transfer process, enabling ultrafast hole funneling from CQD to BHJ to be extracted. As a result, a power conversion efficiency of 13.66% with high photocurrent >34 mA cm−2is achieved by employingo ‐DCB‐processed BHJ HTL, far exceeding the performance of the CQDPV solely employing neat polymer HTL. A charge conduction mechanism associated with the BHJ HTL structure suppressing the bimolecular recombination is proposed. This works not only suggests key principles to control the packing structures of organic HTLs but also opens a new avenue to boost optoelectronic performance. -
more » « less
Abstract Significant work has been directed at measuring the exciton diffusion length (
L D) in organic semiconductors due to its significance in determining the performance of photovoltaic cells. Several techniques have been developed to measureL D, often probing photoluminescence or charge carrier generation. Interestingly, in this study it is shown that when different techniques are compared, both the diffusive behavior of the exciton and active carrier recombination loss pathways can be decoupled. Here, a planar heterojunction device based on the donor–acceptor pairing of boron subphthalocyanine chloride‐C60is examined using photoluminescence quenching, photovoltage‐, and photocurrent‐basedL Dmeasurement techniques. Photovoltage yields the device relevantL Dof both active materials as a function of forward bias subject to geminate recombination losses. These values are used to accurately predict the photocurrent as a function of voltage, suggesting geminate recombination is the dominant mechanism responsible for photocurrent loss. By combining these measurements with photocurrent and photoluminescence quenching, the intrinsicL D, as well as the voltage‐dependent charge transfer state dissociation and charge collection efficiencies are quantitatively determined. The results of this work provide a method to decouple all relevant loss pathways during photoconversion, and establish the factors that can limit the performance of excitonic photovoltaic cells. -
more » « less
Abstract In organic semiconductors, optical excitation does not necessarily produce free carriers. Very often, electron and hole are bound together to form an exciton. Releasing free carriers from the exciton is essential for the functioning of photovoltaics and optoelectronic devices, but it is a bottleneck process because of the high exciton binding energy. Inefficient exciton dissociation can limit the efficiency of organic photovoltaics. Here, nanoscale features that can allow the free carrier generation to occur spontaneously despite being an energy uphill process are determined. Specifically, by comparing the dissociation dynamics of the charge transfer (CT) exciton at two donor–acceptor interfaces, it is found that the relative orientation of the electron and hole wavefunction within a CT exciton plays an important role in determining whether the CT exciton will decompose into the higher energy free electron–hole pair or relax to the lower energy tightly‐bound CT exciton. The concept of the entropic driving force is combined with the structural anisotropy of typical organic crystals to devise a framework that can describe how the orientation of the delocalized electronic wavefunction can be manipulated to favor the energy‐uphill spontaneous dissociation of CT excitons over the energy‐downhill CT exciton cooling.
-
Extreme ultraviolet (XUV) light sources based on high harmonic generation are enabling the development of novel spectroscopic methods to help advance the frontiers of ultrafast science and technology. In this account we discuss the development of XUV-RA spectroscopy at near grazing incident reflection geometry and highlight recent applications of this method to study ultrafast electron dynamics at surfaces. Measuring core-to-valence transitions with broadband, femtosecond pulses of XUV light extends the benefits of x-ray absorption spectroscopy to a laboratory tabletop by providing a chemical fingerprint of materials, including the ability to resolve individual elements with sensitivity to oxidation state, spin state, carrier polarity, and coordination geometry. Combining this chemical state sensitivity with femtosecond time resolution provides new insight into the material properties that govern charge carrier dynamics in complex materials. It is well known that surface dynamics differ significantly from equivalent processes in bulk materials, and that charge separation, trapping, transport, and recombination occurring uniquely at surfaces governs the efficiency of numerous technologically relevant processes spanning photocatalysis, photovoltaics, and information storage and processing. Importantly, XUV-RA spectroscopy at near grazing angle is also surface sensitive with a probe depth of 3 nm, providing a new window into electronic and structural dynamics at surfaces and interfaces. Here we highlight the unique capabilities and recent applications of XUVRA spectroscopy to study photo-induced surface dynamics in metal oxide semiconductors, including photocatalytic oxides (Fe2O3, Co3O4 NiO, and CuFeO2) as well as photoswitchable magnetic oxide (CoFe2O4). We first compare the ultrafast electron self-trapping rates via small polaron formation at the surface and bulk of Fe2O3 where we note that the energetics and kinetics of this process differ significantly at the surface. Additionally, we demonstrate the ability to systematically tune this kinetics by molecular functionalization, thereby, providing a route to control carrier transport at surfaces. We also measure the spectral signatures of charge transfer excitons with site specific localization of both electrons and holes in a series of transition metal oxide semiconductors (Fe2O3, NiO, Co3O4). The presence of valence band holes probed at the oxygen L1-edge confirms a direct relationship between the metal-oxygen bond covalency and water oxidation efficiency. For a mixed metal oxide CuFeO2 in the layered delafossite structure, XUV-RA reveals that the sub-picosecond hole thermalization from O 2p to Cu 3d states of CuFeO2 leads to the spatial separation of electrons and holes, resulting in exceptional photocatalytic performance for H2 evolution and CO2 reduction of this material. Finally, we provide an example to show the ability of XUV-RA to probe spin state specific dynamics in a the photo-switchable ferrimagnet, cobalt ferrite (CoFe2O4). This study provides a detailed understating of ultrafast spin switching in a complex magnetic material with site-specific resolution. In summary, the applications of XUV-RA spectroscopy demonstrated here illustrate the current abilities and future promise of this method to extend molecule-level understanding from well-defined photochemical complexes to complex materials so that charge and spin dynamics at surfaces can be tuned with the precision of molecular photochemistry.more » « less
