Lithium niobate on insulator (LNOI) waveguides, as an emerging technology, have proven to offer a promising platform for integrated optics, due to their strong optical confinement comparable to silicon on insulator (SOI) waveguides, while possessing the versatile properties of lithium niobate, such as high electro-optic coefficients. In this paper, we show that mode hybridization, a phenomenon widely found in vertically asymmetric waveguides, can be efficiently modulated in an LNOI ridge waveguide by electro-optic effect, leading to a polarization mode converter with 97% efficiency. Moreover, the proposed device does not require tapering or periodic poling, thereby greatly simplifying the fabrication process. It can also be actively switched by external fields. Such a platform facilitates technological progress of photonics circuits and sensors.
Lithium niobate on insulator (LNOI) has become an intriguing platform for integrated photonics for applications in communications, microwave photonics, and computing. Whereas, integrated devices including modulators, resonators, and lasers with high performance have been recently realized on the LNOI platform, high-speed photodetectors, an essential building block in photonic integrated circuits, have not been demonstrated on LNOI yet. Here, we demonstrate for the first time, heterogeneously integrated modified uni-traveling carrier photodiodes on LNOI with a record-high bandwidth of 80 GHz and a responsivity of 0.6 A/W at a 1550-nm wavelength. The photodiodes are based on an n-down InGaAs/InP epitaxial layer structure that was optimized for high carrier transit time-limited bandwidth. Photodiode integration was achieved using a scalable wafer die bonding approach that is fully compatible with the LNOI platform.
more » « less- PAR ID:
- 10369478
- Publisher / Repository:
- Optical Society of America
- Date Published:
- Journal Name:
- Photonics Research
- Volume:
- 10
- Issue:
- 6
- ISSN:
- 2327-9125
- Page Range / eLocation ID:
- Article No. 1338
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
-
more » « less
Lithium niobate (LN), an outstanding and versatile material, has influenced our daily life for decades—from enabling high-speed optical communications that form the backbone of the Internet to realizing radio-frequency filtering used in our cell phones. This half-century-old material is currently embracing a revolution in thin-film LN integrated photonics. The successes of manufacturing wafer-scale, high-quality thin films of LN-on-insulator (LNOI) and breakthroughs in nanofabrication techniques have made high-performance integrated nanophotonic components possible. With rapid development in the past few years, some of these thin-film LN devices, such as optical modulators and nonlinear wavelength converters, have already outperformed their legacy counterparts realized in bulk LN crystals. Furthermore, the nanophotonic integration has enabled ultra-low-loss resonators in LN, which has unlocked many novel applications such as optical frequency combs and quantum transducers. In this review, we cover—from basic principles to the state of the art—the diverse aspects of integrated thin-film LN photonics, including the materials, basic passive components, and various active devices based on electro-optics, all-optical nonlinearities, and acousto-optics. We also identify challenges that this platform is currently facing and point out future opportunities. The field of integrated LNOI photonics is advancing rapidly and poised to make critical impacts on a broad range of applications in communication, signal processing, and quantum information.
-
more » « less
Integrated photonics operating at visible-near-infrared (VNIR) wavelengths offer scalable platforms for advancing optical systems for addressing atomic clocks, sensors, and quantum computers. The complexity of free-space control optics causes limited addressability of atoms and ions, and this remains an impediment on scalability and cost. Networks of Mach-Zehnder interferometers can overcome challenges in addressing atoms by providing high-bandwidth electro-optic control of multiple output beams. Here, we demonstrate a VNIR Mach-Zehnder interferometer on lithium niobate on sapphire with a CMOS voltage-level compatible full-swing voltage of 4.2 V and an electro-optic bandwidth of 2.7 GHz occupying only 0.35 mm2. Our waveguides exhibit 1.6 dB/cm propagation loss and our microring resonators have intrinsic quality factors of 4.4 × 105. This specialized platform for VNIR integrated photonics can open new avenues for addressing large arrays of qubits with high precision and negligible cross-talk.
-
more » « less
Abstract Millimetre-wave (mmWave) technology continues to draw great interest due to its broad applications in wireless communications, radar, and spectroscopy. Compared to pure electronic solutions, photonic-based mmWave generation provides wide bandwidth, low power dissipation, and remoting through low-loss fibres. However, at high frequencies, two major challenges exist for the photonic system: the power roll-off of the photodiode, and the large signal linewidth derived directly from the lasers. Here, we demonstrate a new photonic mmWave platform combining integrated microresonator solitons and high-speed photodiodes to address the challenges in both power and coherence. The solitons, being inherently mode-locked, are measured to provide 5.8 dB additional gain through constructive interference among mmWave beatnotes, and the absolute mmWave power approaches the theoretical limit of conventional heterodyne detection at 100 GHz. In our free-running system, the soliton is capable of reducing the mmWave linewidth by two orders of magnitude from that of the pump laser. Our work leverages microresonator solitons and high-speed modified uni-traveling carrier photodiodes to provide a viable path to chip-scale, high-power, low-noise, high-frequency sources for mmWave applications.
-
García-Blanco, Sonia M. ; Cheben, Pavel (Ed.)The benefits of photonics over electronics in the application of optical transceivers and both classical and quantum computing have been demonstrated over the past decades, especially in the ability to achieve high bandwidth, high interconnectivity, and low latency. Due to the high maturity of silicon photonics foundries, research on photonics devices such as silicon micro ring resonators (MRRs), Mach-Zehnder modulators (MZM), and photonic crystal (PC) resonators has attracted plenty of attention. Among these photonic devices, silicon MRRs using carrier depletion effects in p-n junctions represent optical switches manufacturable in the most compact magnitude at high volume with demonstrated switching energies ~5.2fJ/bit. In matrix multiplication demonstrated with integrated photonics, one approach is to couple one bus straight waveguide to several MRRs with different resonant wavelengths to transport signals in different channels, corresponding to a matrix row or column. However, such architectures are potentially limited to ~30 MRRs in series, by the limited free-spectral range (FSR) of an individual MRR. We show that PC switches with sub-micron optical mode confinements can have a FSR >300nm, which can potentially enable energy efficient computing with larger matrices of ~200 resonators by multiplexing. In this paper, we present designs for an oxide-clad bus-coupled PC switch with 1dB insertion loss, 5dB extinction, and ~260aJ/bit switching energy by careful control of the cavity geometry as well as p-n junction doping. We also demonstrate that air-clad bus-coupled PC switches can operate with 1dB insertion loss, 3dB extinction, and ~80aJ/bit switching energy.more » « less
