Liquid crystalline elastomers (LCEs) that retain the cholesteric phase (CLCEs) are soft, polymeric materials that retain periodic structure and exhibit a selective reflection. While prior studies have examined thermochromism in CLCEs, the association of temperature change and reflection wavelength shift has been limited to 1.4 nm °C−1. Here, CLCEs with intra‐mesogenic supramolecular bonds are prepared to enhance tunability as well triple the rate (e.g., 4.8 nm °C−1). Specifically, these materials incorporate liquid crystalline monomers based on dimerized oxy‐benzoic acid (OBA) derivatives. Increasing the concentration of the OBA comonomers increases the magnitude of red‐shifting thermochromism of the selective reflection. At and above a threshold concentration, the selective reflection in the CLCEs can disappear upon heating, analogous to on‐off “switching.” Further, the introduction of the supramolecular bonds within the CLCE enable mechanical programming and enhanced one‐time tunable thermochromism via a one‐way shape memory process. Accordingly, this research could enable functional use in low temperature sensitive optical elements, fail‐safe thermal indicators for food packaging, and smart window coatings.
Electrochromic devices have seen widespread adoption in the automotive and aerospace industries and are increasingly considered for applications in the built environment, such as smart windows. Here, a distinctive approach is reported to realizing electrochromism in solid, polymeric materials. The optical elements are based on liquid crystalline elastomers (LCEs) that retain the cholesteric phase (CLCEs). By integrating flexible, optically transparent, and conductive electrodes the CLCEs are actuated as dielectric elastomer actuators. Application of an electric field causes a significant change in the reflection wavelength of fully solid CLCE. The electromechanical response (Maxwell stresses) is reversible. Both uniaxial and biaxial prestrain are shown to enhance and differentiate the stimuli‐response in the photonic device.
more » « less- PAR ID:
- 10371206
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Optical Materials
- Volume:
- 10
- Issue:
- 22
- ISSN:
- 2195-1071
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
Abstract -
Abstract A general assumption in geodesy is that solid Earth deformation in the presence of recent hydrological and ice loading is well approximated by a purely elastic response. In cases where there is clear evidence that thermal and petrological conditions exist that favor vigorous high-temperature creep behavior, such as in the mantle beneath Iceland, Patagonia, Alaska, Japan, and Svalbard, many response models have been approximated by using a Maxwell viscoelasticity. However, non-Maxwellian transient viscoelastic rheology is required for many post-seismic relaxation studies. Here, we reconsider the solid Earth response in light of highly temperature-dependent transient viscoelastic responses currently favored in the mineral physics and seismological communities. We develop a mantle response Green’s function that accounts for the vertical isostatic motion of the mantle caused by the acceleration of ice mass loss for Greenland and Patagonia measured by spaceborne and airborne remote sensing since 1992 and 1945, respectively. The Green’s function may be used to examine how anelasticity influences the uplift associated with accelerated surface mass loss. We perform a parameter exploration of the constants that define the Extended Burgers Material model, a rheology having firm experimental and theoretical underpinnings, in order to isolate those material model parameters that have the greatest impact on anelastic-isostatic uplift over interannual and interdecadal timescales. Anelasticity corrections may be required for solid Earth vertical uplift in space gravimetric solutions for long-term hydrology and cryospheric change.
-
Abstract Unlike nearly all engineered materials which contain bonds that weaken under load, biological materials contain “catch” bonds which are reinforced under load. Consequently, materials, such as the cell cytoskeleton, can adapt their mechanical properties in response to their state of internal, non‐equilibrium (active) stress. However, how large‐scale material properties vary with the distance from equilibrium is unknown, as are the relative roles of active stress and binding kinetics in establishing this distance. Through course‐grained molecular dynamics simulations, the effect of breaking of detailed balance by catch bonds on the accumulation and dissipation of energy within a model of the actomyosin cytoskeleton is explored. It is found that the extent to which detailed balance is broken uniquely determines a large‐scale fluid‐solid transition with characteristic time‐reversal symmetries. The transition depends critically on the strength of the catch bond, suggesting that active stress is necessary but insufficient to mount an adaptive mechanical response.
-
We develop a model for solid objects surrounded by a fluid that accounts for the possibility of acoustic pressures giving rise to damage on the surface of the solid. The propagation of an acoustic pressure in the fluid domain is modeled by the acoustic wave equation. On the other hand, the response of the solid is described by linear elastodynamics coupled with a gradient damage model, one that is based on a cohesive-type phase-field description of fracture. The interaction between the acoustic pressure and the deformation and damage of the solid are represented by transmission conditions at the fluid-solid interface. The resulting governing equations are discretized using a finite-element/finite-difference method that pays particular attention to the spatial and temporal scales that need to be resolved. Results from model-based simulations are provided for a benchmark problem as well as for recent experiments in nanopulse lithotripsy. A parametric study is performed to illustrate how damage develops in response to the driving force (magnitude and location of the acoustic source) as a function of the fracture resistance of the solid. The results are shown to be qualitatively consistent with experimental observations for the location and size of the damage fields on the solid surface. A study of limiting cases also suggests that both the threshold for damage and the critical fracture energy are important to consider in order to capture the transition from damage initiation to complete localization. A low-cycle fatigue model is proposed that degrades the fracture resistance of the solid as a function of accumulated tensile strain energy, and it is shown to be capable of capturing damage localization in simulations of multi-pulse nano-pulse lithotripsy.more » « less
-
Abstract Fluorescent dyes exhibiting luminescence in the solid state are crucial for the development of efficient solid‐state lighting devices. Most fluorophores though do not emit in the solid state, mainly as a result of intermolecular interactions that cause emission quenching. Boron difluoride hydrazone (BODIHY) dyes are peculiar in this sense as their emission is drastically enhanced when transferred from solution to the solid state. The BODIHY dyes are easy to synthesize and derivatize, have tunable absorption and emission profiles and large Stokes shifts, which are all desirable characteristics from solid‐state emitters. Here, we summarize the discovery and development of BODIHY dyes including the tuning of their photophysical properties through structure‐property analyses.