skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Transient behaviour verification and controller tuning for an uncertain grid‐connected photovoltaic system using reachability analysis
Title: Transient behaviour verification and controller tuning for an uncertain grid‐connected photovoltaic system using reachability analysis
Abstract Power electronics–based converters for photovoltaic (PV) systems are susceptible to overcurrents; it is important to design their controllers to reduce the transient current for all viable operating conditions. To design a current controller and find the maximum transient current via simulation‐based techniques, the exact values of the system parameters, initial states, and inputs are required. However, they are not precisely known in practice, some system parameters such as inductances may change over time, and output power and load are variable. The uncertainty in the parameter (filter inductance) and input of the system (injected power) should be considered in the analysis of a PV system controllers as it can degrade their performance, which are designed for the system nominal parameters. This paper employs reachability analysis for a grid‐connected PV system to (1) find the maximum transient current, (2) devise an improved PI current controller and (3) compare the maximum transient current in PI‐ and internal model control (IMC)‐based controllers with uncertain‐but‐bounded input power and inductance error. Simulation and experimental studies showcase the results.  more » « less
Award ID(s):
1837700 1953198
PAR ID:
10371860
Author(s) / Creator(s):
 ;  
Publisher / Repository:
DOI PREFIX: 10.1049
Date Published:
Journal Name:
IET Renewable Power Generation
Volume:
15
Issue:
13
ISSN:
1752-1416
Format(s):
Medium: X Size: p. 2849-2859
Size(s):
p. 2849-2859
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, Frontiers in Energy Research)
    null (Ed.)
    Artificial intelligence methods such as fuzzy logic and particle swarm optimization (PSO) have been applied to maximum power point tracking (MPPT) for solar panels. The P-V curve of a solar panel exhibits multiple peaks under partial shading condition (PSC) when all modules of a solar panel do not receive the same solar irradiation. Although conventional PSO has been shown to perform well under uniform insolation, it is often unable to find the global maximum power point under PSC. Fuzzy adaptive PSO controllers have been proposed for MPPT. However, the controller became computation-intensive in order to adjust the PSO parameters for each particle. In this paper, fuzzy adaptive PSO-based and conventional PSO-based MPPT are compared and evaluated in the aspect of design and performance. A simple fuzzy adaptive PSO controller for MPPT was designed to reach the global optimal point under PSC and uniform irradiation. The controller combines the advantages of both PSO and fuzzy control. The fuzzy controller dynamically adjusts the PSO parameter to improve the convergence speed and global search capability. Since tuning of the PSO parameter is designed to be common for all particles, it reduced the computation complexity. The fuzzy controller’s rule base is designed to obtain a fast transient response and stable steady state response. Design of the fuzzy adaptive PSO-based MPPT is verified with simulation results using a boost converter. The results are evaluated in comparison to the results using a conventional PSO controller under PSC. Simulation shows the fuzzy adaptive PSO-based MPPT is able to improve the global search process and increase the convergency speed. The comparison indicates the settling time using the fuzzy adaptive PSO-based MPPT is 14% faster under PSC on average and 30% faster under uniform irradiation than the settling time using the conventional PSO. Both the fuzzy adaptive and conventional PSO controllers have similar output power tracking accuracy. 
    more » « less
  2. ; ; ; ; (, 2020 IEEE Transportation Electrification Conference & Expo (ITEC))
    null (Ed.)
    High frequency modular power converters are increasingly becoming popular due to their small size and weight. Targeting the input-series and output-parallel (ISOP) dual active bridge (DAB) DC-DC converters, this paper proposes a control scheme based on optimal triple phase-shift (TPS) control for both power sharing control and RMS current minimization. This achieves balanced power transmission, even under mismatched leakage inductance of a DAB module of the ISOP. In order to obtain the optimal zones of operation for the converter, the RMS current was minimized using the Lagrange multiplier method to obtain the optimal duty cycles. The power balancing was added to compensate unbalanced power sharing for variations in model parameters or module shutdown. Analyses and simulation results through MATLAB/Simulink are presented to validate the proposed controller. 
    more » « less
  3. ; ; ; (, IEEE Control Systems Letters)
    Deep reinforcement learning approaches are becoming appealing for the design of nonlinear controllers for voltage control problems, but the lack of stability guarantees hinders their real-world deployment. This letter constructs a decentralized RL-based controller for inverter-based real-time voltage control in distribution systems. It features two components: a transient control policy and a steady-state performance optimizer. The transient policy is parameterized as a neural network, and the steady-state optimizer represents the gradient of the long-term operating cost function. The two parts are synthesized through a safe gradient flow framework, which prevents the violation of reactive power capacity constraints. We prove that if the output of the transient controller is bounded and monotonically decreasing with respect to its input, then the closed-loop system is asymptotically stable and converges to the optimal steady-state solution. We demonstrate the effectiveness of our method by conducting experiments with IEEE 13-bus and 123-bus distribution system test feeders. 
    more » « less
  4. ; ; (, Journal of The Royal Society Interface)
    Integral controller is widely used in industry for its capability of endowing perfect adaptation to disturbances. To harness such capability for precise gene expression regulation, synthetic biologists have endeavoured in building biomolecular (quasi-)integral controllers, such as the antithetic integral controller. Despite demonstrated successes, challenges remain with designing the controller for improved transient dynamics and adaptation. Here, we explore and investigate the design principles of alternative RNA-based biological controllers, by modifying an antithetic integral controller with prevalently found natural feed-forward loops (FFL), to improve its transient dynamics and adaptation performance. With model-based analysis, we demonstrate that while the base antithetic controller shows excellent responsiveness and adaptation to system disturbances, incorporating the type-1 incoherent FFL into the base antithetic controller could attenuate the transient dynamics caused by changes in the stimuli, especially in mitigating the undesired overshoot in the output gene expression. Further analysis on the kinetic parameters reveals similar findings to previous studies that the degradation and transcription rates of the circuit RNA species would dominate in shaping the performance of the controllers. 
    more » « less
  5. ; ; ; (, 2019 IEEE 58th Conference on Decision and Control (CDC))
    Inertia from rotating masses of generators in power systems influence the instantaneous frequency change when an imbalance between electrical and mechanical power occurs. Renewable energy sources (RES), such as solar and wind power, are connected to the grid via electronic converters. RES connected through converters affect the system's inertia by decreasing it and making it time-varying. This new setting challenges the ability of current control schemes to maintain frequency stability. Proposing adequate controllers for this new paradigm is key for the performance and stability of future power grids. The contribution of this paper is a framework to learn sparse time-invariant frequency controllers in a power system network with a time-varying evolution of rotational inertia. We model power dynamics using a Switched-Affine hybrid system to consider different modes corresponding to different inertia coefficients. We design a controller that uses as features, i.e. input, the systems states. In other words, we design a control proportional to the angles and frequencies. We include virtual inertia in the controllers to ensure stability. One of our findings is that it is possible to restrict communication between the nodes by reducing the number of features in the controller (from 22 to 10 in our case study) without disrupting performance and stability. Furthermore, once communication between nodes has reached a threshold, increasing it beyond this threshold does not improve performance or stability. We find a correlation between optimal feature selection in sparse controllers and the topology of the network. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email