Silver nanoparticles (AgNP) can help prevent infection of virus and bacteria. The size and morphology of AgNP can be crucial to function, with smaller nanoparticles (< 20 nm) able to penetrate the cell wall. This is significant as oxidative stress and genotoxicity are associated with some sizes and coatings of AgNP, contraindicating the use of AgNP to reduce infection. We present evidence that a microfluidic chip can synthesize larger sizes and distributions of AgNP from the nano-to-micro size range. We show results from a microfluidic mixing chip that can produce a wide range of nano-to-micro size (~ 24–400 nm) AgNP. Synthesis is based on a modified Turkevich method, using a single-step AgNP synthesis on the microfluidic chip using two chemical components, trisodium citrate (NaCit) and AgNO3. To make AgNP more accessible, we describe the microfluidic chip and conditions capable of synthesis. We also describe how modification of flow rate and chemical reagent concentration change particle diameter during production. In our experiments, we found that AgNP production created a visible adsorption line in the microfluidic device, possibly owing to AgNP surface interaction at the polydimethylsiloxane (PDMS) interface. We characterize these particles with dynamic light scattering (DLS), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). Based on optical light microscopy, we hypothesize that AgNP formation primarily occurs at the interface between the two chemical reagent streams. We also conclude that AgNP size increases could be due to interaction with the PDMS surface, which is known to be porous. Future work will help to understand how surface interaction may influence the formation of larger particles.
Because the diffusivity of particles undergoing the Brownian motion is inversely proportional to their sizes, the size distribution of submicron particles can be estimated by tracking their movement. This particle tracking analysis (PTA) has been applied in various fields, but mainly focused on resolving monodispersed particle populations and is rarely used for measuring oceanic particles that are naturally polydispersed. We demonstrated using Monte Carlo simulation that, in principle, PTA can be used to size natural, oceanic particles. We conducted a series of lab experiments using microbeads of NIST‐traceable sizes to evaluate the performance of ViewSizer 3000, a PTA‐based commercial instrument, and found two major uncertainties: (1) the sample volume varies with the size of particles and (2) the signal‐to‐noise ratio for particles of sizes < 200–250 nm was reduced and hence their concentration was underestimated with the presence of larger particles. After applying the volume correction, we found the instrument can resolve oceanic submicron particles of sizes greater than 250 nm with a mean absolute error of 3.9% in size and 38% in concentration.
more » « less- NSF-PAR ID:
- 10374467
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Limnology and Oceanography: Methods
- Volume:
- 20
- Issue:
- 7
- ISSN:
- 1541-5856
- Page Range / eLocation ID:
- p. 373-386
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Abstract Holographic microscopy has emerged as a tool for in situ imaging of microscopic organisms and other particles in the marine environment: appealing because of the relatively larger sampling volume and simpler optical configuration compared to other imaging systems. However, its quantitative capabilities have so far remained uncertain, in part because hologram reconstruction and image recognition have required manual operation. Here, we assess the quantitative skill of our automated hologram processing pipeline (CCV Pipeline), to evaluate the size and concentration measurements of environmental and cultured assemblages of marine plankton particles, and microspheres. Over 1 million particles, ranging from 10 to 200
μ m in equivalent spherical diameter, imaged by the 4‐Deep HoloSea digital inline holographic microscope (DIHM) are analyzed. These measurements were collected in parallel with a FlowCam (FC), Imaging FlowCytobot (IFCB), and manual microscope identification. Once corrections for particle location and nonuniform illumination were developed and applied, the DIHM showed an underestimate in ESD of about 3% to 10%, but successfully reproduced the size spectral slope from environmental samples, and the size distribution of cultures (Dunaliella tertiolecta ,Heterosigma akashiwo , andProrocentrum micans ) and microspheres. DIHM concentrations (order 1 to 1000 particles ml−1) showed a linear agreement (r 2= 0.73) with the other instruments, but individual comparisons at times had large uncertainty. Overall, we found the DIHM and the CCV Pipeline required extensive manual correction, but once corrected, provided concentration and size estimates comparable to the other imaging systems assessed in this study. Holographic cameras are mechanically simple, autonomous, can operate at very high pressures, and provide a larger sampling volume than comparable lens‐based tools. Thus, we anticipate that these characterization efforts will be rewarded with novel discovery in new oceanic environments. -
more » « less
Abstract The size distribution of suspended particles influences several processes in aquatic ecosystems, including light propagation, trophic interactions, and biogeochemical cycling. The shape of the particle size distribution (PSD) is commonly modeled as a single‐slope power law in oceanographic studies, which can be used to further estimate the relative contributions of different particle size classes to particle number, area, and volume concentration. We use a data set of 168 high size‐resolution PSD measurements in Arctic oceanic waters to examine variability in the shape of the PSD over the particle diameter range 0.8 to 120 μm. An average value of −3.6 ± 0.33 was obtained for the slope of a power law fitted over this size range, consistent with other studies. Our analysis indicates, however, that this model has significant limitations in adequately parameterizing the complexity of the PSD, and thus performs poorly in predicting the relative contributions of different size intervals such as those based on picoplankton, nanoplankton, and microplankton size classes. Similarly, median particle size was also generally a poor indicator of these size class contributions. Our results suggest that alternative percentile diameters derived from the cumulative distribution functions of particle number, cross‐sectional area, and volume concentration may provide better metrics to capture the overall shape of the PSD and to quantify the contributions of different particle size classes.
-
more » « less
Abstract The volume scattering functions for bulk and two submicron size fractions (passing through 0.7 μm GF/F and 0.2 μm membrane filters) were measured in the North Pacific Ocean using a LISST‐VSF to assess the contributions by submicron particles to the overall particle scattering. The contribution by submicron particles increased generally with scattering angle and peaked around 110°. The total backscattering by both submicron fractions did not vary, but that by larger particles increased, with the trophic level. Consequently, the fractional backscattering contribution by submicron particles decreased from approximately 50% to 30% as the chlorophyll‐a concentration increased from <0.1 to 0.3 mg m−3. Despite the experiment covering a limited range of trophic levels, our results confirm that backscattering by submicron particles in clear ocean waters is significant and seems to form a background independent of the backscattering by larger particles.
-
more » « less
Abstract Sea salt aerosol (SSA) plays a significant role in the atmosphere through aerosol direct and indirect effects, and in atmospheric chemistry as a source of tropospheric bromine. In situ measurements of coarse-mode SSA particles are limited because of their low concentration and relatively large sizes (dry radius
r d > 0.5μ m). With this in mind, a new, low-cost, easily usable method for sampling coarse-mode SSA particles in the marine boundary layer was developed. An SSA particle sampler that uses an impaction method was designed and built using 3D printing and Arduino microcontrollers and sensors. It exposes polycarbonate slides to ambient airflow remotely on a kite-based platform to capture coarse-mode SSA particles. Because it is a smaller version of the Giant Nucleus Impactor (GNI), designed for use on aircraft, it is named the miniature Giant Nucleus Impactor (miniGNI). After sample collection, the same optical microscope methodology utilized by the GNI was used to analyze the wetted salt particles that impacted onto the slides. In this proof-of-concept study, multiple miniGNIs were attached serially to a kite string, allowing for sampling at multiple altitudes simultaneously. The robustness of the results from this new instrument and methodology for sampling at ambient RH (~75%) the SSA particle size distribution withr d > 3.3μ m are compared with a similar study. We find that the SSA particle number concentration decreases weakly with altitude and shows no correlation to instantaneousU 10wind speed along the windward coastline of Oʻahu in the Hawaiian Islands.
