skip to main content

Explore Research Products in the NSF-PAR

Title: Water Vapor Contribution to Ceres' Exosphere From Observed Surface Ice and Postulated Ice‐Exposing Impacts
Abstract

Telescopic observations have detected an exosphere around Ceres, composed of either water vapor or its photolytic products. Proposed mechanisms for its formation include sublimation or sputtering from solar energetic particles of buried ice, surface ice, or an optically thin seasonal polar cap. We estimate the amount of water vapor produced by known exposures of water ice, detected in Dawn spacecraft image and spectral data and by ice exposures from subresolution impact craters. We use thermal and sublimation modeling to take into account slope, orientation, and, in the case of water ice within craters, shadowing due to crater walls. We use a Monte Carlo approach to calculate the number of ice‐exposing impacts, where they occur on Ceres' surface, and how long the ice within the impact crater remains bright (e.g., less than one monolayer of sublimation lag). We find that the observed water ice patches on Ceres could account for ~0.06 kg/s of water vapor to (with Oxo crater as the main contributor) and that ice‐exposing impacts that remain bright in appearance after one Ceres year supply 0.08–0.56 kg/s of vapor, depending on the regolith volume fraction of the ice. While water ice has not been detected to date at Occator crater, if it were present we find that Occator is unlikely to be a major contributor of vapor. We find a typical background water vapor production rate from all of Ceres, combining surface and buried ice, of about a few tenths of a kilogram per second.

  more » « less
NSF-PAR ID:
10375274
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  
Publisher / Repository:
DOI PREFIX: 10.1029
Date Published:
Journal Name:
Journal of Geophysical Research: Planets
Volume:
124
Issue:
1
ISSN:
2169-9097
Page Range / eLocation ID:
p. 61-75
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; ; et al ( , Astronomy & Astrophysics)
    null (Ed.)
    Aims. Asteroid (31) Euphrosyne is one of the biggest objects in the asteroid main belt and it is also the largest member of its namesake family. The Euphrosyne family occupies a highly inclined region in the outer main belt and contains a remarkably large number of members, which is interpreted as an outcome of a disruptive cratering event. Methods. The goals of this adaptive-optics imaging study are threefold: to characterize the shape of Euphrosyne, to constrain its density, and to search for the large craters that may be associated with the family formation event. Results. We obtained disk-resolved images of Euphrosyne using SPHERE/ZIMPOL at the ESO 8.2 m VLT as part of our large program (ID: 199.C-0074, PI: Vernazza). We reconstructed its 3D shape via the ADAM shape modeling algorithm based on the SPHERE images and the available light curves of this asteroid. We analyzed the dynamics of the satellite with the Genoid meta-heuristic algorithm. Finally, we studied the shape of Euphrosyne using hydrostatic equilibrium models. Conclusions. Our SPHERE observations show that Euphrosyne has a nearly spherical shape with the sphericity index of 0.9888 and its surface lacks large impact craters. Euphrosyne’s diameter is 268 ± 6 km, making it one of the top ten largest main belt asteroids. We detected a satellite of Euphrosyne – S/2019 (31) 1 – that is about 4 km across, on a circular orbit. The mass determined from the orbit of the satellite together with the volume computed from the shape model imply a density of 1665 ± 242 kg m −3 , suggesting that Euphrosyne probably contains a large fraction of water ice in its interior. We find that the spherical shape of Euphrosyne is a result of the reaccumulation process following the impact, as in the case of (10) Hygiea. However, our shape analysis reveals that, contrary to Hygiea, the axis ratios of Euphrosyne significantly differ from those suggested by fluid hydrostatic equilibrium following reaccumulation. 
    more » « less
  2. ; ; ( , Journal of Climate)
    Abstract

    The dynamic and thermodynamic mechanisms that link retreating sea ice to increased Arctic cloud amount and cloud water content are unclear. Using the fifth generation of the ECMWF Reanalysis (ERA5), the long-term changes between years 1950–79 and 1990–2019 in Arctic clouds are estimated along with their relationship to sea ice loss. A comparison of ERA5 to CERES satellite cloud fractions reveals that ERA5 simulates the seasonal cycle, variations, and changes of cloud fraction well over water surfaces during 2001–20. This suggests that ERA5 may reliably represent the cloud response to sea ice loss because melting sea ice exposes more water surfaces in the Arctic. Increases in ERA5 Arctic cloud fraction and water content are largest during October–March from ∼950 to 700 hPa over areas with significant (≥15%) sea ice loss. Further, regions with significant sea ice loss experience higher convective available potential energy (∼2–2.75 J kg−1), planetary boundary layer height (∼120–200 m), and near-surface specific humidity (∼0.25–0.40 g kg−1) and a greater reduction of the lower-tropospheric temperature inversion (∼3°–4°C) than regions with small (<15%) sea ice loss in autumn and winter. Areas with significant sea ice loss also show strengthened upward motion between 1000 and 700 hPa, enhanced horizontal convergence (divergence) of air, and decreased (increased) relative humidity from 1000 to 950 hPa (950–700 hPa) during the cold season. Analyses of moisture divergence, evaporation minus precipitation, and meridional moisture flux fields suggest that increased local surface water fluxes, rather than atmospheric motions, provide a key source of moisture for increased Arctic clouds over newly exposed water surfaces during October–March.

    Significance Statement

    Sea ice loss has been shown to be a primary contributor to Arctic warming. Despite the evidence linking large sea ice retreat to Arctic warming, some studies have suggested that enhanced downwelling longwave radiation associated with increased clouds and water vapor is the primary reason for Arctic amplification. However, it is unclear how sea ice loss is linked to changes in clouds and water vapor in the Arctic. Here, we investigate the relationship between Arctic sea ice loss and changes in clouds using the ERA5 dataset. Improved knowledge of the relationship between Arctic sea ice loss and changes in clouds will help further our understanding of the role of the cloud feedback in Arctic warming.

     
    more » « less
  3. ; ; ; ; ; ; ; ; ( , The Planetary Science Journal)
    Abstract

    We present the results of a series of laboratory low-speed impacts (< 4 m s−1) of centimeter-sized spherical projectiles into simulated dry and icy regolith samples. The target material was comprised of JSC-1 (Johnson Space Center) lunar simulant grains in the size range 100–250μm, mixed with similar-sized water ice grains. Impacts were performed under vacuum, either at room temperature for JSC-1 samples or at cryogenic temperatures (<150 K) for icy mixtures. We measured the ejecta masses from a collection plate and impact crater dimensions from post-impact crater photographs. We find that both the ejecta masses and crater diameters followed trends predicted by established scaling laws, albeit with different fitting parameters, and we were able to fit a strength regimeπscaling to our measured crater diameters. The water ice in our target material took two forms: grains mixed with the regolith grains and frost from air condensation coating regolith grains. In both cases, the presence of water ice in the sample led to lower ejected masses and smaller crater sizes. In addition, our measured crater sizes were several orders of magnitude larger than expected for impacts into solid rock or water ice. Using our measured scaling parameters, we applied our findings to a planetary context for the study of secondary craters on icy moons, as well as eroding collisions occurring in Saturn’s rings. We found that the deviation of our measurements from solid targets and from commonly used scaling parameters allowed us to reconcile our measurements with the models in both cases.

     
    more » « less
  4. ; ; ; ; ; ; ; ; ; ; et al ( , Astronomy & Astrophysics)
    Context. With an estimated diameter in the 320–350 km range, (704) Interamnia is the fifth largest main belt asteroid and one of the few bodies that fills the gap in size between the four largest bodies with D > 400 km (Ceres, Vesta, Pallas and Hygiea) and the numerous smaller bodies with diameter ≤200 km. However, despite its large size, little is known about the shape and spin state of Interamnia and, therefore, about its bulk composition and past collisional evolution. Aims. We aimed to test at what size and mass the shape of a small body departs from a nearly ellipsoidal equilibrium shape (as observed in the case of the four largest asteroids) to an irregular shape as routinely observed in the case of smaller ( D ≤ 200 km) bodies. Methods. We observed Interamnia as part of our ESO VLT/SPHERE large program (ID: 199.C-0074) at thirteen different epochs. In addition, several new optical lightcurves were recorded. These data, along with stellar occultation data from the literature, were fed to the All-Data Asteroid Modeling algorithm to reconstruct the 3D-shape model of Interamnia and to determine its spin state. Results. Interamnia’s volume-equivalent diameter of 332 ± 6 km implies a bulk density of ρ = 1.98 ± 0.68 g cm −3 , which suggests that Interamnia – like Ceres and Hygiea – contains a high fraction of water ice, consistent with the paucity of apparent craters. Our observations reveal a shape that can be well approximated by an ellipsoid, and that is compatible with a fluid hydrostatic equilibrium at the 2 σ level. Conclusions. The rather regular shape of Interamnia implies that the size and mass limit, under which the shapes of minor bodies with a high amount of water ice in the subsurface become irregular, has to be searched among smaller ( D ≤ 300 km) less massive ( m ≤ 3 × 10 19 kg) bodies. 
    more » « less
  5. ; ; ; ; ; ; ; ( , Journal of Geophysical Research: Earth Surface)
    Abstract

    The rate of growth or retreat of the Greenland and Antarctic ice sheets remains a highly uncertain component of future sea level change. Here we examine the simulation of Greenland ice sheet surface mass balance (GrIS SMB) in a development branch of the ModelE2 version of the NASA Goddard Institute for Space Studies (GISS) general circulation model (GCM). GCMs are often limited in their ability to represent SMB compared with polar region regional climate models. We compare ModelE2‐simulated GrIS SMB for present‐day (1996–2005) simulations with fixed ocean conditions, at a spatial resolution of 2° latitude by 2.5° longitude (~200 km), with SMB simulated by the Modèle Atmosphérique Régionale (MAR) regional climate model (1996–2005 at a 25‐km resolution). ModelE2 SMB agrees well with MAR SMB on the whole, but there are distinct spatial patterns of differences and large differences in some SMB components. The impacts of changes to the ModelE2 surface are tested, including a subgrid‐scale representation of SMB with surface elevation classes. This has a minimal effect on ice sheet‐wide SMB but corrects local biases. Replacing fixed surface albedo with satellite‐derived values and an age‐dependent scheme has a larger impact, increasing simulated melt by 60%–100%. We also find that lower surface albedo can enhance the effects of elevation classes. Reducing ModelE2 surface roughness length to values closer to MAR reduces sublimation by ~50%. Further work is required to account for meltwater refreezing in ModelE2 and to understand how differences in atmospheric processes and model resolution influence simulated SMB.

     
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email