skip to main content

Attention:

The NSF Public Access Repository (NSF-PAR) system and access will be unavailable from 5:00 PM ET until 11:00 PM ET on Friday, June 21 due to maintenance. We apologize for the inconvenience.


Title: Transient Deformation in California From Two Decades of GPS Displacements: Implications for a Three‐Dimensional Kinematic Reference Frame
Abstract

Our understanding of plate boundary deformation has been enhanced by transient signals observed against the backdrop of time‐independent secular motions. We make use of a new analysis of displacement time series from about 1,000 continuous Global Positioning System (GPS) stations in California from 1999 to 2018 to distinguish tectonic and nontectonic transients from secular motion. A primary objective is to define a high‐resolution three‐dimensional reference frame (datum) for California that can be rapidly maintained with geodetic data to accommodate both secular and time‐dependent motions. To this end, we compare the displacements to those predicted by a horizontal secular fault slip model for the region and construct displacement and strain rate fields. Over the past 19 years, California has experienced 19 geodetically detectable earthquakes and widespread postseismic deformation. We observe postseismic strain rate variations as large as 1,000 nstrain/year with moment releases equivalent up to an Mw6.8 earthquake. We find significant secular differences up to 10 mm/year with the fault slip model, from the Mendocino Triple Junction to the southern Cascadia subduction zone, the northern Basin and Range, and the Santa Barbara channel. Secular vertical uplift is observed across the Transverse Ranges, Coastal Ranges, Sierra Nevada, as well as large‐scale postseismic uplift after the 1999 Mw7.1 Hector Mine and 2010 Mw7.2 El Mayor‐Cucapah earthquakes. We also identify areas of vertical land motions due to anthropogenic, natural, and magmatic processes. Finally, we demonstrate the utility of the kinematic datum by improving the accuracy of high‐spatial‐resolution 12‐day repeat‐cycle Sentinel‐1 Interferometric Synthetic Aperture Radar displacement and velocity maps.

 
more » « less
NSF-PAR ID:
10375553
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  ;  
Publisher / Repository:
DOI PREFIX: 10.1029
Date Published:
Journal Name:
Journal of Geophysical Research: Solid Earth
Volume:
124
Issue:
11
ISSN:
2169-9313
Page Range / eLocation ID:
p. 12189-12223
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    The 2019 Ridgecrest conjugate Mw6.4 and Mw7.1 events resulted in several meters of strike‐slip and dip‐slip along an intricate rupture, extending from the surface down to 15 km. Now with >2 years of post‐rupture observations, we utilize these results to better understand vertical postseismic deformation from the Ridgecrest sequence and illuminate the emerging significance of vertical earthquake cycle deformation data. We determine the cumulative vertical displacement observed by the continuous GNSS network since Ridgecrest, which requires additional time series analyses to adequately resolve vertical deformation compared to the horizontal. Using a Maxwell‐type viscoelastic relaxation model, with a best fit time‐averaged asthenosphere viscosity of 4e17 Pa·s and a laterally heterogeneous lithosphere, we find that viscoelastic relaxation accounts for a majority of the cumulative vertical deformation at Ridgecrest and strongly controls far‐field observations in all north‐east‐up components. The viscoelastic model alone generally underpredicts deformation from GNSS and the remaining nonviscoelastic displacement is most prominent in the horizontal near‐field (−16 to 19 mm), revealing a deformation pattern matching the coseismic observations. This suggests that multiple deformation mechanisms are contributing to Ridgecrest's postseismic displacement, where afterslip likely dominates the near‐field while viscoelastic relaxation controls the far‐field. Similar deformation at individual GNSS stations has been observed for past earthquakes and additionally reveals long‐term transient viscosity over several years. Moreover, the greater temporal and spatial resolution of the GNSS array for Ridgecrest will help resolve the evolution of deformation for the entire network of observations as regional postseismic deformation persists for the next several years.

     
    more » « less
  2. Abstract Interferometric Synthetic Aperture Radar is an important tool for imaging surface deformation from large continental earthquakes. Here, we present maps of coseismic displacement and strain from the 2019 Ridgecrest earthquakes using multiple Sentinel-1 images. We provide three types of interferometric products. (1) Standard interferograms from two look directions provide an overview of the deformation and can be used for modeling coseismic slip. (2) Phase gradient maps from stacks of coseismic interferograms provide high-resolution (∼30  m) images of strain concentration and surface fracturing that can be used to guide field surveys. (3) High-pass filtered, stacked, unwrapped phase is decomposed into east–west and up–down, south–north components and is used to determine the sense of fault slip. The resulting phase gradient maps reveal over 300 surface fractures, including triggered slip on the Garlock fault. The east–west component of high-pass filtered phase reveals the polarity of the strike-slip offset (right lateral or left lateral) for many of the fractures. We find a small number of fractures that have slip polarity that is retrograde to the background tectonic stress. This is similar to observations of retrograde slip observed near the 1999 Mw 7.1 Hector Mine rupture, but the Ridgecrest observations are more completely imaged by the frequent and high-quality acquisitions from the twin Sentinel-1 spacecrafts. Determining whether the retrograde features are triggered slip on existing faults, or compliant fault deformation in response to stress changes from the Ridgecrest earthquakes, or new Coulomb-style failures, will require additional field work, modeling, and analysis. 
    more » « less
  3. Abstract

    Postseismic deformation following subduction earthquakes includes the combined effects of afterslip surrounding the coseismic rupture areas and viscoelastic relaxation in the asthenosphere and provides unique and valuable information for understanding the rheological structure. Because the two postseismic mechanisms are usually spatiotemporally intertwined, we developed an integrated model combining their contributions, based on 5 years of observations following the 2016 Pedernales (Ecuador) earthquake. The results show that the early, near‐field postseismic deformation is dominated by afterslip, both updip and downdip of the coseismic rupture, and requires heterogeneous interface frictional properties. Viscoelastic relaxation contributes more to far‐field displacements at later time periods. The best‐fit integrated model favors a 45‐km thick lithosphere overlying a Burgers body viscoelastic asthenosphere with a Maxwell viscosity of 3 × 1019 Pa s (0.9–5 × 1019 Pa s at 95% confidence), assuming the Kelvin viscosity equal to 10% of that value. In addition to the postseismic afterslip, the coastal displacement of sites north and south of the rupture clearly require extra slip in the plate motion direction due to slow slip events that may be triggered by the coseismic stress changes (CSC) but are not purely driven by the CSC. Spatially variable afterslip following the Pedernales event, combined with the SSEs during the interseismic period, demonstrate that spatial frictional variability persists throughout the whole earthquake cycle. The interaction of adjacent fault patches with heterogeneous properties may contribute to the clustered large earthquakes in this area.

     
    more » « less
  4. Scaled physical experiments allow us to directly observe deformational processes that take place on time and length scales that are impossible to observe in the Earth’s crust. Successful evaluation of advection and uplift of material within a restraining bend along a strike-slip fault zone depends on capturing the evolution of strain in three dimensions. Consequently, we require deformation within the horizontal plane as well as vertical motions. While 3D digital image correlation systems can provide this information, their high costs have prompted us to develop techniques that require only two DSLR cameras and a few Matlab® toolboxes, which are available to researchers at many institutions. Matlab® plug-ins can perform particle image velocimetry (PIV), a technique used in many analog modeling studies to map the incremental displacements fields. For tracking material advection throughout experiments more suitable Matlab® plug-ins perform particle tracking velocimetry (PTV), which tracks the complete two-dimensional displacement path of individual particles. To capture uplift the Matlab® Computer Vision ToolboxTM, uses pairs of photos to capture the evolving topography of the experiment. The stereovision approach eliminates the need to stop the experiment to perform 3D laser scans, which can be problematic when working with materials that have time dependent rheology. We demonstrate how the combination of PIV, PTV, and stereovision analysis of experiments that simulate the Mount McKinley restraining bend reveal the evolution of the fault system and three-dimensional advection of material through the bend. 
    more » « less
  5. Abstract

    We generated dense, high‐resolution 3‐D ground displacement maps for the 2016 MW7.8 Kaikōura, New Zealand earthquake—the most geometrically and kinematically complex rupture yet recorded—from stereo WorldView optical satellite imagery using a new methodology that combines subpixel image correlation with a ray‐tracing approach. Our analysis reveals fundamental new details of near‐field displacement patterns, which cannot easily be obtained through other methods. From our detailed correlation maps, we measured fault slip in 3‐D along 19 faults at 500‐m spacing. Minimum resolvable horizontal slip is ~0.1 m, and vertical is ~0.5 m. Net slip measurements range from <1 to ~12 m. System‐level kinematic analysis shows that slip on faults north of the Hope fault was oriented primarily subparallel to the Pacific‐Australian plate motion direction. In contrast, slip on faults to the south was primarily at high angle to the plate motion and secondarily parallel to plate motion. Fault kinematics are in some locations consistent with long‐term uplift patterns, but inconsistent in others. Deformation within the Seaward Kaikōura Range may indicate an attempt by the plate boundary fault system to geometrically simplify. Comparison of published field measurements along the Kekerengu fault with our correlation‐derived measurements reveals that ~36% of surface displacement was accommodated as distributed off‐fault deformation when considering only field measurements of discrete slip. Comparatively, field measurements that project previously linear features (e.g., fence lines) into the fault over apertures >5–100 m capture nearly all (~90%) of the surface deformation.

     
    more » « less