Surface‐enhanced Raman spectroscopy (SERS) has become a sensitive detection technique for biochemical analysis. Despite significant research efforts, most SERS substrates consisting of single‐resonant plasmonic nanostructures on the planar surface suffer from limitations of narrowband SERS operation and unoptimized nano‐bio interface with living cells. Here, it is reported that nanolaminate plasmonic nanocavities on 3D vertical nanopillar arrays can support a broadband SERS operation with large enhancement factors (>106) under laser excitations at 532, 633, and 785 nm. The multi‐band Raman mapping measurements show that nanolaminate plasmonic nanocavities on vertical nanopillar arrays exhibit broadband uniform SERS performance with diffraction‐limited resolution at a single nanopillar footprint. By selective exposure of embedded plasmonic hotspots in individual metal–insulator–metal (MIM) nanogaps, nanoscale broadband SERS operation at the single MIM nanocavity level with visible and near‐infrared (vis–NIR) excitations is demonstrated. Numerical studies reveal that nanolaminate plasmonic nanocavities on vertical nanopillars can support multiple hybridized plasmonic modes to concentrate optical fields across a broadband wavelength range from 500 to 900 nm at the nanoscale.
Multicellular systems, such as microbial biofilms and cancerous tumors, feature complex biological activities coordinated by cellular interactions mediated via different signaling and regulatory pathways, which are intrinsically heterogeneous, dynamic, and adaptive. However, due to their invasiveness or their inability to interface with native cellular networks, standard bioanalysis methods do not allow in situ spatiotemporal biochemical monitoring of multicellular systems to capture holistic spatiotemporal pictures of systems‐level biology. Here, a high‐throughput reverse nanoimprint lithography approach is reported to create biomimetic transparent nanoplasmonic microporous mesh (BTNMM) devices with ultrathin flexible microporous structures for spatiotemporal multimodal surface‐enhanced Raman spectroscopy (SERS) measurements at the bio‐interface. It is demonstrated that BTNMMs, supporting uniform and ultrasensitive SERS hotspots, can simultaneously enable spatiotemporal multimodal SERS measurements for targeted pH sensing and non‐targeted molecular detection to resolve the diffusion dynamics for pH, adenine, and Rhodamine 6G molecules in agarose gel. Moreover, it is demonstrated that BTNMMs can act as multifunctional bio‐interfaced SERS sensors to conduct in situ spatiotemporal pH mapping and molecular profiling of
- PAR ID:
- 10379710
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Small
- Volume:
- 18
- Issue:
- 45
- ISSN:
- 1613-6810
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
Single-entity electrochemistry is of fundamental importance and shows promise for ultrasensitive biosensing applications. Recently, we have demonstrated that various charged nanoparticles can be detected individually based on the non-redox open-circuit potential (OCP) changes induced by their collision events on a floating carbon nanoelectrode (CNE). Unlike the widely used amperometry approach, the potentiometric method provides the label-free detection of individual nanoscale entities without redox mediators in the solution. However, the CNE lacks specificity for molecular recognition during the collision events because of the limited methods of surface functionalization for carbon surfaces. Herein, we used surface-functionalized gold nanoelectrode (GNE) to overcome this limitation of CNE. The GNE modified with Raman reporter molecule also enabled surface-enhanced Raman spectroscopy (SERS) measurements. By using simultaneous time-resolved OCP and SERS measurements, both the OCP and SERS signals induced by the “hit-n-run” type of gold nanoparticle (GNP) collision events can be better understood. Also, by introducing a zwitterionic molecule, we formed near “stealth” surface and demonstrated that the non-specific adsorptions of GNPs to the surface of GNE have been suppressed, allowing continuous detection of hit-n-run events for over 30 min.more » « less
-
more » « less
Abstract The realization of optically active structures with direct‐write printing has been challenging, particularly in spatially constrained microfluidic devices which are essential for point‐of‐care (POC) applications. The existing techniques are limited by resolution, accessibility, and multistep fabrication constraints. “Point‐and‐shoot” strategies to achieve site‐specific fabrication of optically active Ag rings and on‐demand targeted surface‐enhanced optical spectroscopy are reported. Stable microbubbles over an Au nanoisland (AuNI) substrate are generated using a continuous‐wave laser at low power (≈0.5 mW µm−2). Analytical modeling of bubble generation process substantiates the evolution of ring morphology and its power dependence. The tunable Ag rings exhibit surface plasmon resonances in the mid‐IR regime from 3.8 to 4.6 µm, while the AuNI shows visible region response. The Ag ring over the AuNI imparts intensified surface‐enhanced Raman spectroscopy (SERS) activity owing to amplified hot spots at Ag ring/AuNI interface. As an example, SERS and surface‐enhanced infrared spectroscopy of rhodamine 6G, crystal violet, and 2,4,6‐trinitrotoluene molecules, respectively, are demonstrated. The applicability of this technique to perform in situ fabrication and SERS sensing in microfluidic channels is shown. Using a simple in situ approach toward optically active structures, our technique can synergize multiple surface‐enhanced optical spectroscopies to facilitate POC applications.
-
more » « less
Abstract The enormous increase of Raman signal in the vicinity of metal nanoparticles allows surface‐enhanced Raman spectroscopy (SERS) to be employed for label‐free detection of substances at extremely low concentrations. However, the ultimate potential of label‐free SERS to identify pharmaceutical compounds at low concentrations, especially in relation to biofluid sensing, is far from being fully realized. Opioids are a particular challenge for rapid clinical identification because their molecular structural similarities prevent their differentiation with immunolabeling approaches. In this paper, a new method called quantitative label‐free SERS (QLF‐SERS) which involves the formation of halide‐conjugated gold nanoclusters trapping the analyte of interest near the SERS hot spots is reported, and it is demonstrated that it yields a 105fold improvement in the detection limit over previously reported results for the entire class of clinically relevant opioids and their metabolites. Measurements of opioid concentrations in multicomponent mixtures are also demonstrated. QLF‐SERS has comparable detection limits as currently existing laboratory urine drug testing techniques but is significantly faster and inexpensive and, therefore, can be easily adapted as part of a rapid clinical laboratory routine.
-
null (Ed.)Glass nanopipettes have shown promise for applications in single-cell manipulation, analysis, and imaging. In recent years, plasmonic nanopipettes have been developed to enable surface-enhanced Raman spectroscopy (SERS) measurements for single-cell analysis. In this work, we developed a SERS-active nanopipette that can be used to perform long-term and reliable intracellular analysis of single living cells with minimal damage, which is achieved by optimizing the nanopipette geometry and the surface density of the gold nanoparticle (AuNP) layer at the nanopipette tip. To demonstrate its ability in single-cell analysis, we used the nanopipette for intracellular pH sensing. Intracellular pH (pH i ) is vital to cells as it influences cell function and behavior and pathological conditions. The pH sensitivity was realized by simply modifying the AuNP layer with the pH reporter molecule 4-mercaptobenzoic acid. With a response time of less than 5 seconds, the pH sensing range is from 6.0 to 8.0 and the maximum sensitivity is 0.2 pH units. We monitored the pH i change of individual HeLa and fibroblast cells, triggered by the extracellular pH (pH e ) change. The HeLa cancer cells can better resist pH e change and adapt to the weak acidic environment. Plasmonic nanopipettes can be further developed to monitor other intracellular biomarkers.more » « less
