Shear‐recoverable hydrogels based on block copolypeptides with rapid self‐recovery hold potential in extrudable and injectable 3D‐printing applications. In this work, a series of 3‐arm star‐shaped block copolypeptides composed of an inner hydrophilic poly(
Hydrogels hold much promise for 3D printing of functional living materials; however, challenges remain in tailoring mechanical robustness as well as biological performance. In addressing this challenge, the modular synthesis of functional hydrogels from 3‐arm diblock copolypeptide stars composed of an inner poly(
- Award ID(s):
- 1933487
- NSF-PAR ID:
- 10385020
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials
- Volume:
- 35
- Issue:
- 3
- ISSN:
- 0935-9648
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
Abstract l ‐glutamate) domain and an outer β‐sheet forming domain is synthesized with varying side chains and block lengths. By changing the β‐sheet forming domains, hydrogels with diverse microstructures and mechanical properties are prepared and structure–function relationships are determined using scattering and rheological techniques. Differences in the properties of these materials are amplified during direct‐ink writing with a strong correlation observed between printability and material chemistry. Significantly, it is observed that non‐canonical β‐sheet blocks based on phenyl glycine form more stable networks with superior mechanical properties and writability compared to widely used natural amino acid counterparts. The versatile design available through block copolypeptide materials provides a robust platform to access tunable material properties based solely on molecular design. These systems can be exploited in extrusion‐based applications such as 3D‐printing without the need for additives. -
Abstract The preparation of new diblock copolypeptide hydrogels derived from homologs of
l ‐methionine, that is,l ‐homomethionine andl ‐6‐(methylthio)‐l ‐norleucine is described. Compared tol ‐methionine residues, use ofl ‐methionine homologs allow improved copolymerization withl ‐leucine residues to give well‐defined block copolypeptides. These copolypeptides are subsequently modified using robust thioether alkylation reactions employing a variety of functional epoxides, which yield samples capable of forming transparent, self‐healing hydrogels in water. The facile variation of different functional epoxides for postpolymerization modification is found to allow predictable functionalization and tuning of hydrogel properties by the modification of simple precursors. -
Abstract Scaffold‐guided formation of neuronal‐like networks, especially under electrical stimulation, can be an appealing avenue toward functional restoration of injured nervous systems. Here, 3D conductive scaffolds are fabricated based on printed microfiber constructs using near‐field electrostatic printing (NFEP) and graphene oxide (GO) coating. Various microfiber patterns are obtained from poly(
l ‐lactic acid‐co ‐caprolactone) (PLCL) using NFEP and complexity is achieved via modulating the fiber overlay angles (45°, 60°, 75°, 90°), fiber diameters (15 to 148 µm), and fiber spatial organization (spider web and tubular structure). Upon coating GO onto PLCL microfibers via a layer‐by‐layer (L‐b‐L) assembly technique and in situ reduction into reduced GO (rGO), the obtained conductive scaffolds, with 25–50 layers of rGO, demonstrate superior conductivity (≈0.95 S cm−1) and capability of inducing neuronal‐like network formation along the conductive microfibers under electrical stimulation (100–150 mV cm−1). Both electric field (0–150 mV cm−1) and microfiber diameter (17–150 µm) affect neurite outgrowth (PC‐12 cells and primary mouse hippocampal neurons) and the formation of orientated neuronal‐like networks. With further demonstration of such guidance to neuronal cells, these conductive scaffolds may see versatile applications in nerve regeneration and neural engineering. -
A polypeptide-based hydrogel system, when prepared from a diblock polymer with a ternary copolypeptide as one block, exhibited thermo-, mechano- and enzyme-responsive properties, which enabled the encapsulation of naproxen (Npx) during the sol–gel transition and its release in the gel state. Statistical terpolymerizations of l -alanine (Ala), glycine (Gly) and l -isoleucine (Ile) NCAs at a 1 : 1 : 1 feed ratio initiated by monomethoxy monoamino-terminated poly(ethylene glycol) afforded a series of methoxy poly(ethylene glycol)- block -poly( l -alanine- co -glycine- co - l -isoleucine) (mPEG- b -P(A-G-I)) block polymers. β-Sheets were the dominant secondary structures within the polypeptide segments, which facilitated a heat-induced sol-to-gel transition, resulting from the supramolecular assembly of β-sheets into nanofibrils. Deconstruction of the three-dimensional networks by mechanical force (sonication) triggered the reverse gel-to-sol transition. Certain enzymes could accelerate the breakdown of the hydrogel, as determined by in vitro gel weight loss profiles. The hydrogels were able to encapsulate and release Npx over 6 days, demonstrating the potential application of these polypeptide hydrogels as an injectable local delivery system for small molecule drugs.more » « less
-
Abstract Crosslinked polymers and gels are important in soft robotics, solar vapor generation, energy storage, drug delivery, catalysis, and biosensing. However, their attractive mass transport and volume‐changing abilities are diffusion‐limited, requiring miniaturization to avoid slow response. Typical approaches to improving diffusion in hydrogels sacrifice mechanical properties by increasing porosity or limit the total volumetric flux by directionally confining the pores. Despite tremendous efforts, simultaneous enhancement of diffusion and mechanical properties remains a long‐standing challenge hindering broader practical applications of hydrogels. In this work, cononsolvency photopolymerization is developed as a universal approach to overcome this swelling–mechanical property trade‐off. The as‐synthesized poly(
N ‐isopropylacrylamide) hydrogel, as an exemplary system, presents a unique open porous network with continuous microchannels, leading to record‐high volumetric (de)swelling speeds, almost an order of magnitude higher than reported previously. This swelling enhancement comes with a simultaneous improvement in Young's modulus and toughness over conventional hydrogels fabricated in pure solvents. The resulting fast mass transport enables in‐air operation of the hydrogel via rapid water replenishment and ultrafast actuation. The method is compatible with 3D printing. The generalizability is demonstrated by extending the technique to poly(N ‐tertbutylacrylamide‐co‐ polyacrylamide) and polyacrylamide hydrogels, non‐temperature‐responsive polymer systems, validating the present hypothesis that cononsolvency is a generic phenomenon driven by competitive adsorption.