skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Low‐Damping Spin‐Wave Transmission in YIG/Pt‐Interfaced Structures
Magnetic heterostructures consisting of single-crystal yttrium iron garnet (YIG) films coated with platinum are widely used in spin-wave experiments related to spintronic phenomena such as the spin-transfer-torque, spin-Hall, and spin-Seebeck effects. However, spin waves in YIG/Pt bilayers experience much stronger attenuation than in bare YIG films. For micrometer-thick YIG films, this effect is caused by microwave eddy currents in the Pt layer. This paper reports that by employing an excitation configuration in which the YIG film faces the metal plate of the microstrip antenna structure, the eddy currents in Pt are shunted and the transmission of the Damon–Eschbach surface spin wave is greatly improved. The reduction in spin-wave attenuation persists even when the Pt coating is separated from the ground plate by a thin dielectric layer. This makes the proposed excitation configuration suitable for injection of an electric current into the Pt layer and thus for application in spintronics devices. The theoretical analysis carried out within the framework of the electrodynamic approach reveals how the platinum nanolayer and the nearby highly conductive metal plate affect the group velocity and the lifetime of the Damon–Eshbach surface wave and how these two wavelength-dependent quantities determine the transmission characteristics of the spin-wave device.  more » « less
Award ID(s):
2138236
PAR ID:
10385476
Author(s) / Creator(s):
; ; ; ; ; ; ;
Date Published:
Journal Name:
Advanced Materials Interfaces
ISSN:
2196-7350
Page Range / eLocation ID:
2201323
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; (, Journal of Applied Physics)
    Spin-to-charge conversion and the reverse process are now critically important physical processes for a wide range of fundamental and applied studies in spintronics. Here, we experimentally demonstrate effective spin-to-charge conversion in thermally evaporated chromium thin films using the longitudinal spin Seebeck effect (LSSE). We present LSSE results measured near room temperature for Cr films with thicknesses from 2 to 11 nm, deposited at room temperature on bulk polycrystalline yttrium-iron-garnet (YIG) substrates. Comparison of the measured LSSE voltage, [Formula: see text], in Cr to a sputtered Pt film at the same nominal thickness grown on a matched YIG substrate shows that both films show comparably large spin-to-charge conversion. As previously shown for other forms of Cr, the LSSE signal for evaporated Cr/YIG shows the opposite sign compared to Pt, indicating that Cr has a negative spin Hall angle, [Formula: see text]. We also present measured charge resistivity, [Formula: see text], of the same evaporated Cr films on YIG. These values are large compared to Pt and comparable to [Formula: see text]-W at a similar thickness. Non-monotonic behavior of both [Formula: see text] and [Formula: see text] with film thickness suggests that spin-to-charge conversion in evaporated Cr, which we expect has a different strain state than previously investigated sputtered films, could be modified by spin density wave antiferromagnetism in Cr. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al (, Applied Physics Letters)
    Acoustically driven ferromagnetic resonance (ADFMR) is a platform that enables efficient generation and detection of spin waves via magnetoelastic coupling with surface acoustic waves (SAWs). While previous studies successfully achieved ADFMR in ferromagnetic metals, there are only few reports on ADFMR in magnetic insulators such as yttrium iron garnet (Y3Fe5O12, YIG) despite more favorable spin wave properties, including low damping and long coherence length. The growth of high-quality YIG films for ADFMR devices is a major challenge due to poor lattice-matching and thermal degradation of the piezoelectric substrates during film crystallization. In this work, we demonstrate ADFMR of YIG thin films on LiNbO3 (LNO) substrates. We employed a SiOx buffer layer and rapid thermal annealing for crystallization of YIG films with minimal thermal degradation of LNO substrates. Optimized ADFMR device designs and time-gating measurements were used to enhance the ADFMR signal and overcome the intrinsically low magnetoelastic coupling of YIG. YIG films have a polycrystalline structure with an in-plane easy direction due to biaxial stresses induced during cooling after crystallization. The YIG device shows clear ADFMR patterns with maximum absorption for H ≈ 160 mT parallel to SAW propagation, which is consistent with our simulation results based on existing theoretical models. These results expand possibilities for developing efficient spin wave devices with magnetic insulators. 
    more » « less
  3. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Materials)
    Spin waves, quantized as magnons, have low energy loss and magnetic damping, which are critical for devices based on spin‐wave propagation needed for information processing devices. The organic‐based magnet [V(TCNE)x; TCNE = tetracyanoethylene; x ≈ 2] has shown an extremely low magnetic damping comparable to, for example, yttrium iron garnet (YIG). The excitation, detection, and utilization of coherent and non‐coherent spin waves on various modes in V(TCNE)x is demonstrated and show that the angular momentum carried by microwave‐excited coherent spin waves in a V(TCNE)x film can be transferred into an adjacent Pt layer via spin pumping and detected using the inverse spin Hall effect. The spin pumping efficiency can be tuned by choosing different excited spin wave modes in the V(TCNE)x film. In addition, it is shown that non‐coherent spin waves in a V(TCNE)x film, excited thermally via the spin Seebeck effect, can also be used as spin pumping source that generates an electrical signal in Pt with a sign change in accordance with the magnetization switching of the V(TCNE)x. Combining coherent and non‐coherent spin wave detection, the spin pumping efficiency can be thermally controlled, and new insight is gained for the spintronic applications of spin wave modes in organic‐based magnets. 
    more » « less
  4. ; ; ; ; ; ; ; ; ; (, Journal of Applied Physics)
    Yttrium iron garnet (YIG) magnonics has garnered significant research interest because of the unique properties of magnons (quasiparticles of collective spin excitation) for signal processing. In particular, hybrid systems based on YIG magnonics show great promise for quantum information science due to their broad frequency tunability and strong compatibility with other platforms. However, their broad applications have been severely constrained by substantial microwave loss in the gadolinium gallium garnet (GGG) substrate at cryogenic temperatures. In this study, we demonstrate that YIG thin films can be spalled from YIG/GGG samples. Our approach is validated by measuring hybrid devices comprising superconducting resonators and spalled YIG films, which exhibit anti-crossing features that indicate strong coupling between magnons and microwave photons. Such new capability of separating YIG thin films from GGG substrates via spalling and the integrated superconductor-YIG devices represent a significant advancement for integrated magnonic devices, paving the way for advanced magnon-based coherent information processing. 
    more » « less
  5. ; ; (, Advanced Functional Materials)
    Abstract The manipulation of magnetization through optically generated ultrafast spin currents is a fascinating area that needs a thorough understanding for its potential future applications. In this work, a comprehensive investigation of helicity‐driven optical spin‐orbit torque in heavy metal/ferromagnetic metal heterostructures is presented, specifically cobalt capped with gold or platinum, subject to laser pumping at different wavelengths. The results demonstrate up to tenfold enhancement in optical spin‐orbit torque quantum efficiency for gold compared to platinum of the same thickness when pumped with a visible laser. Additionally, the study provides the first experimental analysis of the photon energy dependence of optical spin‐orbit torque and derives the optical spin orientation spectra for both gold/cobalt and platinum/cobalt heterostructures. A key insight gained from the study is the impact of photon energy‐dependent spin transport in the system, which suggests the use of a high photon energy pump for efficient spin transport. These findings highlight the potential of spin current generation and manipulation in gold/ferromagnet heterostructures for a wide range of applications such as all‐optical magnetization switching, spin‐wave generation and control, and spintronic terahertz emission. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email