With the recent development of wearable electronics and smart textiles, flexible sensor technology is gaining increasing attention. Compared to flexible film‐based sensors, multimaterial fiber‐based technology offers unique advantages due to the breathability, durability, wear resistance, and stretchability in fabric structures. Despite the significant progress made in the fabrication and application of fiber‐based sensors, none of the existing fiber technologies allow for fully distributed pressure or temperature sensing. Herein, the design and fabrication of thermally drawn multi‐material fibers that offer distributed temperature and pressure measurement capability is reported. Thermoplastic materials, thermoplastic elastomers, and metal electrodes are successfully co‐drawn in one fiber. The embedded electrodes inside the fibers form a parallel wire transmission line, and the local characteristic impedance is designed to change with the temperature or pressure. The electrical frequency domain reflectometry is used to interrogate the impedance change along the fiber and provides information with high spatial resolution. The two types of fibers reported in this manuscript have a pressure sensitivity of 4 kPa and a temperature sensitivity of 2 °C, respectively. This work can pave the road for development of functional fibers and textiles for pressure and temperature mapping.
Fabrics are an indispensable part of our everyday life. They provide us with protection, offer privacy and form an intimate expression of ourselves through their esthetics. Imparting functionality at the fiber level represents an intriguing path toward innovative fabrics with a hitherto unparalleled functionality and value. The fiber technology based on thermal drawing of a preform, which is identical in its materials and geometry to the final fiber, has emerged as a powerful platform for the production of exquisite fibers with prerequisite composition, geometric complexity and control over feature size. A ‘Moore's law’ for fibers is emerging, delivering higher forms of function that are important for a broad spectrum of practical applications in healthcare, sports, robotics, space exploration, etc. In this review, we survey progress in thermally drawn fibers and devices, and discuss their relevance to ‘smart’ fabrics. A new generation of fabrics that can see, hear and speak, sense, communicate, harvest and store energy, as well as store and process data is anticipated. We conclude with a critical analysis of existing challenges and opportunities currently faced by thermally drawn fibers and fabrics that are expected to become sophisticated platforms delivering value-added services for our society.
more » « less- NSF-PAR ID:
- 10391593
- Publisher / Repository:
- Oxford University Press
- Date Published:
- Journal Name:
- National Science Review
- Volume:
- 10
- Issue:
- 1
- ISSN:
- 2095-5138
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Abstract Supercapacitor fibers, with short charging times, long cycle lifespans, and high power densities, hold promise for powering flexible fabric‐based electronics. To date, however, only short lengths of functioning fiber supercapacitors have been produced. The primary goal of this study is to introduce a supercapacitor fiber that addresses the remaining challenges of scalability, flexibility, cladding impermeability, and performance at length. This is achieved through a top‐down fabrication method in which a macroscale preform is thermally drawn into a fully functional energy‐storage fiber. The preform consists of five components: thermally reversible porous electrode and electrolyte gels; conductive polymer and copper microwire current collectors; and an encapsulating hermetic cladding. This process produces 100 m of continuous functional supercapacitor fiber, orders of magnitude longer than any previously reported. In addition to flexibility (5 mm radius of curvature), moisture resistance (100 washing cycles), and strength (68 MPa), these fibers have an energy density of 306 μWh cm−2at 3.0 V and ≈100% capacitance retention over 13 000 cycles at 1.6 V. To demonstrate the utility of this fiber, it is machine‐woven and used as filament for 3D printing.
-
more » « less
Abstract Circular supply chains require more accurate product labeling and traceability. In the apparel industry, product life cycle management is hampered in part by inaccurate, poorly readable, and detachable standard care labels. Instead, this article seeks to enable a labeling system capable of being integrated into the fabric itself, intrinsically recyclable, low‐cost, encodes information, and allows rapid readout after years of normal use. In this work, all‐polymer photonic crystals are designed and then fabricated by thermal drawing with >100 layers having sub‐micrometer individual thickness and low refractive index contrast (Δ
n = 0.1). The fibers exhibit reflectance features in the 1–5.5 µm wavelength range, characterized using insitu Fourier transform infrared spectroscopy. Drawn photonic fibers are then woven into fabrics, characterized by near‐infrared spectroscopy and short‐wave infrared imaging, techniques commonly used in industrial facilities for sorting materials. The fibers’ optical design also enables the use of overtone peaks to avoid overlap with parasitic molecular absorption, substantially improving the signal‐to‐noise ratio (and therefore ease and speed) of readout. The ability to produce kilometers of fiber that are compatible with existing textile manufacturing processes, coupled with low input material cost, make these a potential market‐viable improvement over the standard care label. -
more » « less
Abstract Textile devices have benefited from the discovery of new conductive materials and innovations in textile device design. These devices include textile‐based supercapacitors (TSCs), encompassing fiber, yarn, and fabric supercapacitors, which have demonstrated practical value in powering wearable devices. Recent review articles have highlighted the limited energy density of TSCs as an important challenge, demanding new electrode materials with higher electronic conductivity and theoretical capacitance than present materials. Ti3C2T
x , a member of the MXene family, is known for its metallic conductivity and high volumetric capacitance in acidic electrolytes due to its pseudocapacitive behavior. Driven by these excellent properties, recent literature has reported promising integration methods of Ti3C2Tx into TSCs with significantly improved areal and volumetric capacitance compared with non‐MXene‐based TSCs. Furthermore, knitted MXene‐based TSCs demonstrated practical application of wearable energy storage devices in textiles. Herein, the techniques used to produce MXene‐based fibers, yarns, and fabrics and the progress in architecture design and performance metrics are highlighted. Challenges regarding the introduction of this new material into fiber/yarn/fabric architectures are discussed, which will inform the development of textile‐based devices beyond energy storage applications. Opportunities surrounding the development of MXene‐based fibers with tunable mechanical, electrical, and electrochemical properties are proposed, which will be the direction of future research efforts. -
more » « less
Abstract Broad adoption of magnetic soft robotics is hampered by the sophisticated field paradigms for their manipulation and the complexities in controlling multiple devices. Furthermore, high‐throughput fabrication of such devices across spatial scales remains challenging. Here, advances in fiber‐based actuators and magnetic elastomer composites are leveraged to create 3D magnetic soft robots controlled by unidirectional fields. Thermally drawn elastomeric fibers are instrumented with a magnetic composite synthesized to withstand strains exceeding 600%. A combination of strain and magnetization engineering in these fibers enables programming of 3D robots capable of crawling or walking in magnetic fields orthogonal to the plane of motion. Magnetic robots act as cargo carriers, and multiple robots can be controlled simultaneously and in opposing directions using a single stationary electromagnet. The scalable approach to fabrication and control of magnetic soft robots invites their future applications in constrained environments where complex fields cannot be readily deployed.
