skip to main content

Title: Focusing of partially coherent light by a graded-index lens

We use coherence theory to study how the focusing of an optical beam by a graded-index (GRIN) lens is affected when the incoming beam is only partially coherent. The Gaussian–Schell model is used to show that the intensity of a partially coherent beam exhibits self-imaging and evolves in a periodic fashion in a GRIN medium with a parabolic index profile. Spatial coherence of the beam affects a single parameter that governs how much the beam is compressed at the focal point. Our results show that the focal spot size depends on the fraction of the beam’s diameter over which coherence persists. Focusing ceases to occur, and the beam may even expand at the focal point of a GRIN lens, when this fraction is below 10%.

more » « less
Author(s) / Creator(s):
Publisher / Repository:
Optical Society of America
Date Published:
Journal Name:
Optics Letters
0146-9592; OPLEDP
Page Range / eLocation ID:
Article No. 436
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. A conventional optical lens can be used to focus light into the target medium from outside, without disturbing the medium. The focused spot size is proportional to the focal distance in a conventional lens, resulting in a tradeoff between penetration depth in the target medium and spatial resolution. We have shown that virtual ultrasonically sculpted gradient-index (GRIN) optical waveguides can be formed in the target medium to steer light without disturbing the medium. Here, we demonstrate that such virtual waveguides can relay an externally focused Gaussian beam of light through the medium beyond the focal distance of a single external physical lens, to extend the penetration depth without compromising the spot size. Moreover, the spot size can be tuned by reconfiguring the virtual waveguide. We show that these virtual GRIN waveguides can be formed in transparent and turbid media, to enhance the confinement and contrast ratio of the focused beam of light at the target location. This method can be extended to realize complex optical systems of external physical lenses and in situ virtual waveguides, to extend the reach and flexibility of optical methods.

    more » « less
  2. Abstract

    We demonstrate in situ non-invasive relay imaging through a medium without inserting physical optical components. We show that a virtual optical graded-index (GRIN) lens can be sculpted in the medium using in situ reconfigurable ultrasonic interference patterns to relay images through the medium. Ultrasonic wave patterns change the local density of the medium to sculpt a graded refractive index pattern normal to the direction of light propagation, which modulates the phase front of light, causing it to focus within the medium and effectively creating a virtual relay lens. We demonstrate the in situ relay imaging and resolving of small features (22 µm) through a turbid medium (optical thickness = 5.7 times the scattering mean free path), which is normally opaque. The focal distance and the numerical aperture of the sculpted optical GRIN lens can be tuned by changing the ultrasonic wave parameters. As an example, we experimentally demonstrate that the axial focal distance can be continuously scanned over a depth of 5.4 mm in the modulated medium and that the numerical aperture can be tuned up to 21.5%. The interaction of ultrasonic waves and light can be mediated through different physical media, including turbid media, such as biological tissue, in which the ultrasonically sculpted GRIN lens can be used for relaying images of the underlying structures through the turbid medium, thus providing a potential alternative to implanting invasive endoscopes.

    more » « less
  3. A conventional optical lens can enhance lateral resolution in optical coherence tomography (OCT) by focusing the input light onto the sample. However, the typical Gaussian beam profile of such a lens will impose a tradeoff between the depth of focus (DOF) and the lateral resolution. The lateral resolution is often compromised to achieve amm-scale DOF. We have experimentally shown that using a cascade system of an ultrasonic virtual tunable optical waveguide (UVTOW) and a short focal-length lens can provide a large DOF without severely compromising the lateral resolution compared to an external lens with the same effective focal length. In addition, leveraging the reconfigurability of UVTOW, we show that the focal length of the cascade system can be tuned without the need for mechanical translation of the optical lens. We compare the performance of the cascade system with a conventional optical lens to demonstrate enhanced DOF without compromising the lateral resolution as well as reconfigurability of UVTOW for OCT imaging.

    more » « less
  4. This paper presents the design, simulation and experimental validation of a gradient-index (GRIN) metasurface lens operating at 8 GHz for microwave imaging applications. The unit cell of the metasurface consists of an electric-LC (ELC) resonator. The effective refractive index of the metasurface is controlled by varying the capacitive gap at the center of the unit cell. This allows the design of a gradient index surface. A one-dimensional gradient index lens is designed and tested at first to describe the operational principle of such lenses. The design methodology is extended to a 2D gradient index lens for its potential application as a microwave imaging device. The metasurface lenses are designed and analyzed using full-wave finite element (FEM) solver. The proposed 2D lens has an aperture of size 119 mm (3.17λ) × 119 mm (3.17λ) and thickness of only 0.6 mm (0.016λ). Horn antenna is used as source of plane waves incident on the lens to evaluate the focusing performance. Field distributions of the theoretical designs and fabricated lenses are analyzed and are shown to be in good agreement. A microwave nondestructive evaluation (NDE) experiment is performed with the 2D prototype lens to image a machined groove in a Teflon sample placed at the focal plane of the lens. 
    more » « less
  5. A new lens capability for three-dimensional (3D) focal control is presented using an optofluidic system consisting ofn × narrayed liquid prisms. Each prism module contains two immiscible liquids in a rectangular cuvette. Using the electrowetting effect, the shape of the fluidic interface can be rapidly adjusted to create its straight profile with the prism’s apex angle. Consequently, an incoming ray is steered at the tilted interface due to the refractive index difference between two liquids. To achieve 3D focal control, individual prisms in the arrayed system are simultaneously modulated, allowing incoming light rays to be spatially manipulated and converged on a focal point located atPfocal(fx,fy,fz) in 3D space. Analytical studies were conducted to precisely predict the prism operation required for 3D focal control. Using three liquid prisms positioned on thex-,y-, and 45°-diagonal axes, we experimentally demonstrated 3D focal tunability of the arrayed optofluidic system, achieving focal tuning along lateral, longitudinal, and axial directions as wide as 0 ≤ fx ≤ 30 mm, 0 ≤ fy ≤ 30 mm, and 500 mm ≤ fz ≤ ∞. This focal tunability of the arrayed system allows for 3D control of the lens’s focusing power, which could not be attained by solid-type optics without the use of bulky and complex mechanical moving components. This innovative lens capability for 3D focal control has potential applications in eye-movement tracking for smart displays, autofocusing of smartphone cameras, or solar tracking for smart photovoltaic systems.

    more » « less