A Reset MOSFET is added to a perovskite MOSFET-based photodetector to serve as a current source to mitigate the influence of ionic movement on the performance of the photodetector. With the added MOSFET, the hysteresis is significantly reduced, and the dark current is controllable. The on/off ratio resumes to 10^6 and an ultrasensitive responsivity (over 80,000 A/W) is achieved under only 13 nW/cm^2 red (665 nm) light intensity.
more »
« less
Ultrasensitive Perovskite Photodetector Achieved When Configured with a Si Metal Oxide Semiconductor Field‐Effect Transistor
A novel photodetecting device architecture that combines the optoelectronic property advantages of a perovskite and the amplification properties of a Si metal–oxide–semiconductor field‐effect transistor (MOSFET) to innovate a photodetecting system with ultrahigh sensitivity, especially in low‐light intensity, is demonstrated. This perovskite‐based MOSFET photodetector (PM‐PD) can respond as low as 116 nW cm−2with extremely high responsivity 4200 A W−1. The perovskite is part of the gate dielectric to modulate the MOSFET drain current when the light intensity is changed. A direct bandgap, organic–inorganic hybrid halide perovskite with a large optical absorption coefficient, can enhance photodetector performance. However, perovskite materials are not good conductors for transporting photogenerated electrons and holes compared with single‐crystal silicon. Therefore, the perovskite was utilized as a dielectric where the capacitance is used instead. In the proposed PM‐PD architecture, changing the width‐to‐length (W/L) ratio of perovskite capacitor electrodes, can modulate the dark current from picoamperes to microamperes providing a tunable parameter for optimizing photodetecting performance. Furthermore, the capacitance of the perovskite can be modulated by frequency, which facilitates matching the capacitance of perovskite and MOSFET gate oxide—another important requirement for optimal photodetecting performance. Finally, our novel PM‐PD is commensurate with potential 3D monolithic integration.
- Award ID(s):
- 1653343
- PAR ID:
- 10390105
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Photonics Research
- Volume:
- 4
- Issue:
- 1
- ISSN:
- 2699-9293
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
more » « less
Abstract In this paper, electrostatically configurable 2D tungsten diselenide (WSe2) electronic devices are demonstrated. Utilizing a novel triple‐gate design, a WSe2device is able to operate as a tunneling field‐effect transistor (TFET), a metal–oxide–semiconductor field‐effect transistor (MOSFET) as well as a diode, by electrostatically tuning the channel doping to the desired profile. The implementation of scaled gate dielectric and gate electrode spacing enables higher band‐to‐band tunneling transmission with the best observed subthreshold swing (SS) among all reported homojunction TFETs on 2D materials. Self‐consistent full‐band atomistic quantum transport simulations quantitatively agree with electrical measurements of both the MOSFET and TFET and suggest that scaling gate oxide below 3 nm is necessary to achieve sub‐60 mV dec−1SS, while further improvement can be obtained by optimizing the spacers. Diode operation is also demonstrated with the best ideality factor of 1.5, owing to the enhanced electrostatic control compared to previous reports. This research sheds light on the potential of utilizing electrostatic doping scheme for low‐power electronics and opens a path toward novel designs of field programmable mixed analog/digital circuitry for reconfigurable computing.
-
more » « less
Abstract Solution‐processed organic–inorganic metal halide perovskites have recently attracted tremendous attention in the photodetector community due to their excellent optoelectronic properties and facile fabrication. The main challenge in perovskite photodetectors (PSPDs) is to achieve high responsivity and fast speed simultaneously. In this work, this challenge is overcome by employing a directly patterned nanograting methylammonium lead iodide (MAPbI3) film in metal‐semiconductor‐metal (MSM) PSPD on interdigitated indium tin oxide (ITO) electrodes. Because of the improved perovskite morphology after directly patterning by nanoimprint lithography, as well as the enhanced electric field intensity by the perovskite nanograting and interdigitated electrodes, the PSPDs have responsivity of 441 A W−1, detectivity of 8.32 × 1012Jones, response time of 10.7 µs, all of which are among the best performances in MSM PSPDs. Moreover, the PSPDs maintain excellent photocurrent performance after 20 days of air exposure. The approach opens a path to manufacturing‐friendly, high‐performance, and reliable PSPDs and paves the way toward perovskite‐based optoelectronic circuits.
-
more » « less
Abstract A negative‐capacitance high electron mobility transistor (NC‐HEMT) with low hysteresis in the subthreshold region is demonstrated in the wide bandgap AlGaN/GaN material system using sputtered BaTiO3as a “weak” ferroelectric gate in conjunction with a conventional SiN
x dielectric. An enhancement in the capacitance for BaTiO3/SiNx gate stacks is observed in comparison to control structures with SiNx gate dielectrics directly indicating the negative capacitance contribution of the ferroelectric BaTiO3layer. A significant reduction in the minimum subthreshold slope for the NC‐HEMTs is obtained in contrast to standard metal‐insulator‐semiconductor HEMTs with SiNx gate dielectrics—97.1 mV dec−1versus 145.6 mV dec−1—with almost no hysteresis in theI D–V Gtransfer curves. These results are promising for the integration of ferroelectric perovskite oxides with III‐Nitride devices toward NC‐field‐effect transistor switches with reduced power consumption. -
more » « less
The realization of biomass‐derived supercapacitors of high performance is of practical importance for the manufacturing of supercapacitors from green and renewable sources. Herein, the feasibility of constructing high‐performance supercapacitors from potato‐derived activated carbon (AC) is demonstrated. The potato‐derived AC is produced from potato mash through hydrothermal treatment and high‐temperature activation with KOH as agent. The supercapacitors with aqueous electrolyte of 6
m KOH and a mass loading of 5 mg per electrode achieve a specific gravimetric capacitance of 333.7 F g−1per electrode and a specific energy of 11.75 W h g−1at a specific power of 197.6 W kg−1at a current density of 0.4 A g−1under a nominal compressive stress of 7.96 MPa. The supercapacitors with a mass loading of 10 mg per electrode achieve the maximum specific gravimetric capacitance of 340.6 F g−1and a specific energy of 11.75 W h g−1at a specific power of 194.2 W kg−1at a current density of 0.4 A g−1under a nominal compressive stress of 7.96 MPa. Increasing the compaction of electrode materials under compressive stress has the potential to increase the electrochemical performance of supercapacitors.
