An official website of the United States government
In recent decades, more than 100 different mechanophores with a broad range of activation forces have been developed. For various applications of mechanophores in polymer materials, it is crucial to selectively activate the mechanophores with high efficiency, avoiding nonspecific bond scission of the material. In this study, we embedded cyclobutane-based mechanophore cross-linkers (I and II) with varied activation forces (fa) in the first network of the double network hydrogels and quantitively investigated the activation selectivity and efficiency of these mechanophores. Our findings revealed that cross-linker I, with a lower activation force relative to the bonds in the polymer main chain (fa-I/fa-chain = 0.8 nN/3.4 nN), achieved efficient activation with 100% selectivity. Conversely, an increase of the activation force of mechanophore II (fa-II/fa-chain = 2.5 nN/3.4 nN) led to a significant decrease of its activation efficiency, accompanied by a substantial number of nonspecific bond scission events. Furthermore, with the coexistence of two cross-linkers, significantly different activation forces resulted in the almost complete suppression of the higher-force one (i.e., I and III, fa-I/fa-III = 0.8 nN/3.4 nN), while similar activation forces led to simultaneous activations with moderate efficiencies (i.e., I and IV, fa-I/fa-IV = 0.8 nN/1.6 nN). These findings provide insights into the prevention of nonspecific bond rupture during mechanophore activation and enhance our understanding of the damage mechanism within polymer networks when using mechanophores as detectors. Besides, it establishes a principle for combining different mechanophores to design multiple mechanoresponsive functional materials.
more »
« less
Covalent Mechanochemistry and Contemporary Polymer Network Chemistry: A Marriage in the Making
Over the past 20 years, the field of polymer mechanochemistry has amassed a toolbox of mechanophores that translate mechanical energy into a variety of functional responses ranging from color change to small-molecule release. These productive chemical changes typically occur at the length scale of a few covalent bonds (Å) but require large energy inputs and strains on the micro-to-macro scale in order to achieve even low levels of mechanophore activation. The minimal activation hinders the translation of the available chemical responses into materials and device applications. The mechanophore activation challenge inspires core questions at yet another length scale of chemical control, namely: What are the molecular-scale features of a polymeric material that determine the extent of mechanophore activation? Further, how do we marry advances in the chemistry of polymer networks with the chemistry of mechanophores to create stress-responsive materials that are well suited for an intended application? In this Perspective, we speculate as to the potential match between covalent polymer mechanochemistry and recent advances in polymer network chemistry, specifically, topologically controlled networks and the hierarchical material responses enabled by multi-network architectures and mechanically interlocked polymers. Both fundamental and applied opportunities unique to the union of these two fields are discussed.
more »
« less
- Award ID(s):
- 2116298
- PAR ID:
- 10390778
- Date Published:
- Journal Name:
- Journal of the American Chemical Society
- ISSN:
- 0002-7863
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Polymer mechanochemistry offers attractive opportunities for using macroscopic forces to drive molecular-scale chemical transformations, but achieving efficient activation in bulk polymeric materials has remained challenging. Understanding how the structure and topology of polymer networks impact molecular-scale force distributions is critical for addressing this problem. Here we show that in block copolymer elastomers the molecular-scale force distributions and mechanochemical activation yields are strongly impacted by the molecular weight distribution of the polymers. We prepare bidisperse triblock copolymer elastomers with spiropyran mechanophores placed in either the short chains, the long chains, or both and show that the overall mechanochemical activation of the materials is dominated by the short chains. Molecular dynamics simulations reveal that this preferential activation occurs because pinning of the ends of the elastically effective midblocks to the glassy/rubbery interface forces early extension of the short chains. These results suggest that microphase segregation and network strand dispersity play a critical role in determining molecular-scale force distributions and suggest that selective placement of mechanophores in microphase-segregated polymers is a promising design strategy for efficient mechanochemical activation in bulk materials.more » « less
-
Abstract Most elastomers undergo strain‐induced crystallization (SIC) under tension; as individual chains are held rigidly in a fixed position by an applied strain, their alignment along the strain field results in a shift from strain‐hardening (SH) to SIC. A similar degree of stretching is associated with the tension necessary to accelerate mechanically coupled, covalent chemical responses of mechanophores in overstretched chains, raising the possibility of an interplay between the macroscopic response of SIC and the molecular response of mechanophore activation. Here, thiol‐yne‐derived stereoelastomers doped covalently with a dipropiolate‐derivatized spiropyran (SP) mechanophore (0.25–0.38 mol%) are reported. The material properties of SP‐containing films are consistent with undoped controls, indicating that the SP is a reporter of the mechanical state of the polymer. Uniaxial tensile tests reveal correlations between mechanochromism and SIC, which are strain‐rate‐dependent. When mechanochromic films are stretched slowly to the point of mechanophore activation, the covalently tethered mechanophore remains trapped in a force‐activated state, even after the applied stress is removed. Mechanophore reversion kinetics correlate with the applied strain rate, resulting in highly tunable decoloration rates. Because these polymers are not covalently crosslinked, they are recyclable by melt‐pressing into new films, increasing their potential range of strain‐sensing, morphology‐sensing, and shape‐memory applications.more » « less
-
Abstract The field of polymer mechanochemistry has been revolutionized by implementing force-responsive functional groups—mechanophores. The rational design of mechanophores enables the controlled use of force to achieve constructive molecular reactivity and material responses. While a variety of mechanophores have been developed, this Mini Review focuses on cyclobutane, which has brought valuable insights into molecular reactivity and dynamics as well as innovations in materials. We discuss its reactivity and mechanism, dynamics and stereoselectivity, as well as impacts on material properties.more » « less
-
Polymers that release small molecules in response to mechanical force are promising candidates as next-generation on-demand delivery systems. Despite advancements in the development of mechanophores for releasing diverse payloads through careful molecular design, the availability of scaffolds capable of discharging biomedically significant cargos in substantial quantities remains scarce. In this report, we detail a nonscissile mechanophore built from an 8-thiabicyclo[3.2.1]octane 8,8-dioxide (TBO) motif that releases one equivalent of sulfur dioxide (SO2) from each repeat unit. The TBO mechanophore exhibits high thermal stability but is activated mechanochemically using solution ultrasonication in either organic solvent or aqueous media with up to 63% efficiency, equating to 206 molecules of SO2 released per 143.3 kDa chain. We quantified the mechanochemical reactivity of TBO by single-molecule force spectroscopy and resolved its single-event activation. The force-coupled rate constant for TBO opening reaches ∼9.0 s–1 at ∼1520 pN, and each reaction of a single TBO domain releases a stored length of ∼0.68 nm. We investigated the mechanism of TBO activation using ab initio steered molecular dynamic simulations and rationalized the observed stereoselectivity. These comprehensive studies of the TBO mechanophore provide a mechanically coupled mechanism of multi-SO2 release from one polymer chain, facilitating the translation of polymer mechanochemistry to potential biomedical applications.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1021/jacs.2c09623
